Fail to connect to Citrix with limited user, but succeeds with the Admin user

Similar Questions

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Home to the host windows group Group 8 Windows 7 not connecting not even with the help of the troubleshooter.

  I just got a win computer 8 and already have a Windows 7 computer, but for some reason any not connecting not even with the convenience of no help at all

  so if you can help solve me this problem please help. When I enter the password is says something like impossible connet to the home group.

  Hi Zpve,

  Let us know a few more things on the issue.

  1 to the computer on which you created the collective housing, Windows 7 or Windows 8?

  2. what version of Windows 7 do you have?

  3. what exactly is the problem you have?

  4. what happens when you try to connect to a home group?

  5. what error message do you get when you enter the password?

  I suggest you go through the links to find out how to create a group of home.

  For Windows 8:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-from-start-to-finish

  For Windows 7:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  You can go through the link and look for possible causes.

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Homegroup: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Get back to us with answers from the EPF.

• I used to be able to get on a site, but two days ago I can't either. I spoke with the Admin of the site and the site looks at me as non-legit, he said.

  I used to frequent a site RPing until two days earlier Sunday, January 26, 2014. After talking with the admin of the Site, I was told that the site is no longer recognized me as a person "legitimate." I passed through all the normal steps, updated, uninstall and reinstall Firefox, delete cookies and history, removed the proxy for the connection (and all other proxy options) and even by restarting the computer. I tried to access the site on other browsers, IE and Chrome and it works great! I still have other friends who can continue to use the site on Firefox! I don't know how to solve the problem, and I hate Chrome/IE with a passion, so I pray there is a way to solve this problem and I would like to use Firefox again for the site. Regarding the error I get whenever I try to access the site, it reads. "The requested URL '(Site address)' could not be found or is not available. Please check the spelling or try again later. »

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• IKM SQL file Append-controlled fails when it is used with the Scheduler

  Hello
  We have an interface in our package where we use IKM SQL file Append-controlled. It is supposed to do an insert/truncate a local file destination. This step fails with the error 7000 run with the Scheduler. Looks like some sort of permission error.
  When the package is run manually (in the same location as the Planner), he runs this interface successfully.
  Any suggestions?
  Wwhen the IKM research, it does not say that the "target file must be physically accessible by sunopsis agent." The file is local to the server running the Scheduler; by operating manually also, it is run from the server.
  This is the error to "truncate": step
  7000: null: java.sql.SQLException: file not found: \ < filepath > / < Filename > .tsv
  java.sql.SQLException: file not found: \ < filepath > / < Filename > .tsv
  
  Any suggestions?
  Thank you
  Elkaïm
  
  Published by: 784749 on February 1st, 2011 05:47

  HI -.
  Agent ODI connection users that you have provided to the service Windows ODI. If you have not provided one that he would use the native ID (one that was created when installing the OS I think). If you have not provided any newspaper on before its best to provide to a user that has enough previlage.

  -app

• How can I connect Epson R1800 with the new iMac?

  Older to make sure printer, but it is good quality and I have a lot of ink and the large photo paper I want to use up. The printer is connected to my iMac plus old (2009) with the cable provided with the printer and an ethernet (Sonnet simply fast) adapter. It seems that the new iMac is a 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector). Although my Sonnet connector seems to fit in the port, I can't get the computer to recognize that there is a connected printer. Until I can do that, it seems that I can't download the printer driver and everything what I need Epson. (Old iMac died, failed to retrieve the latest driver from there).

  So do I need a different Ethernet adapter? Alternatively, I have USB ports available, how to connect to the printer with a USB connection?

  This printer has a USB port so just connect with a USB cable to the USB port on the iMac.  Download and install drivers from here: printer drivers Epson v3.2 for OS X.

  After installing drivers go to Scanners & printers/system to complete installation.

  Printer is supported you in accordance with this Apple document: printer and scanner software available for download for your Mac - Apple Support

  

• cannot access the files of another user with the admin account

  I'm on a computer with Windows Vista 64-bit home problems.
  I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
  Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.

  I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
  Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.

  I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.

  What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?

  What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?

  How can I use the powers of the administrator to access other files (regular) user?
  Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.

  I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
  I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy

• Domain user Windows 2008r2 with the admin group membership

  Hello

  I have a windows 2008R2 domain controller and a user there are members of the admin. When I log in with that account to a pc windows 7 (member of the same domain), I'm not able to change any setting as properties of lan, uninstall or reinstall all programs.

  I also want to give the domain users only the rights to change the properties of local network (for users of laptops).

  Thanks in advance

  Your question is out of reach of these forums as server issues are best addressed on Technet:

  https://social.technet.Microsoft.com/forums/

  So please post your request there.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Connected HP - 'problem with the printer '.

  Having not used the 'Apps' on my HP Photosmart 7520e for awhile I discovered that my printer is recognized on logging in HP ePrint, as "one line", but here's a yellow Triangle telling me 'problem with printer.

  My printer functions ok but if I try to use an application (I tried to print the calendar), I get the message "unable to connect to web services. "Cool Internet access and try again.

  I tested the printer by sending a test print of my Tablet and that works fine but Apps simply do not seem to recognize a web connection.

  Quite simply... Out there!

  Hi OnnaBugeisha,

  Thank you for being a member of the community of HP support.  I understand that you are unable to get the applications to connect from the front panel of the printer and you get a message "Problem with the printer" in connected HP.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  Regarding applications is not enabled on the front panel of the printer, HP is aware of the problem and working on a solution. It is recommended that you have your updates of product set to automatic on the front of the printer in order to receive the update as soon as it is available. If you wish to discuss with a phone support agent, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region.  If you do not live the USA/Canada region, please click the link below to find technical support for your country/region number.

  Hewlett Packard technical support

• Zone blackBerry Smartphones changed after connects to pc with the bb Desktop Manager

  Hello. Everyone. My bb torch is still change zone eniwitok-12 in area of Beijing while that connects with the pc using the bb Desktop Manager. How it can be fixed? Anyone know this questions.

  Yes, in the BlackBerry Desktop Software, there is an option to ' day of the date and time of the device ' on connection.

  Disable that.

• Cannot create or delete applications Essbase with the Admin user.

  Hello

  I'm running Essbase in version 11.1.2.3.505. For some reason, I can't create or delete applications in Essbase using the native admin account. I suspect it may be due to the fact that I wore recently users another environment via LCM HSS & that the roles were somewhat detached/altered in the HSS database. I checked that the commissioning for the admin user has full administrator for the Cluster Essbase HSS rights. The ID works very well elsewhere in the suite of the EMP, workspace, planning, etc. But the option to create or delete applications are greyed out. I have a workaround, where I can use a user newly created/configured to handle these tasks. I'm not sure how LCM would allow the superposition of the admin account properties in the HSS schema.

  FYI - check the table CSS_USERS, the creation date is the date of construction original (as well as all other indigenous users) - so I don't think it's relevant. I guess the problem would lie in CSS_PROVISIONING_INFO, CSS_ROLES, or a similar place. After opening a SR with Oracle, they recommended that I restore the entire schema I quickly rejected. He is not a danger, because I use the workaround. But it would be nice to have an overview of the pros on what is happening / what has happened.

  Thank you

  Mike

  Wow, that's weird.  What do you see on the side of Essbase (rather than look at Shared Services) If you "appear privilege user xxxx;" in MaxL?

• WIFI connection is possible with the A40-702 Satellite?

  Broadband provider, I phoned the other day, upgrade to wireless - now concerned that my laptop (model above) will not work with the radio.
  Could someone advise me?

  Hello

  This is perhaps a help to your problem with the Machine
  Check the Toshiba download site http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp, you may become an update of the WIFI driver for your laptop. Select this check box. Visit the website of your Service provider.
  Find you not a driver, check the Configuration with the card. It does not not not a relocation from the Driver actually go and started a new Installation from the Driver is and a new configuration.

  By