Connectivity problem - problem with the modem or the router of network

Similar Questions

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Connection problem with the database, the closure of Flex Builder

  Hello

  I developed a web page that connects to a database, reads data and it shows on the screen. I use HTTPService to connect to a php server that supports MySQL data. Everything is OK when I run the Flex Builder web page, but when I run the page doing double click on the file released .html the connection fails and the program generates this error:

  [RPC Fault faultString = "" error #2028: file:///Q:/2009-08-05-1330FinalFrontEnd/bin-release/FrontEnd.swf SWF file with Local file system cannot access Internet URL http://localhost/Test2/Test2.php. "faultCode ="InvokeFailed"faultDetail ="null""]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http.mxml::HTTPService/ http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http::HTTPService/send()
  at mx.rpc.http.mxml::HTTPService/send()
  in FrontEnd / submitLabelsQuery)
  in FrontEnd / updateLabels)
  in FrontEnd / ___FrontEnd_SetEventHandler5_handler)

  Does anyone know how can I use the web page without using Flex Builder?

  More information:

  I use Flex Builder 3 to the development of the web page and WampServer 2.0 for the connection with the database.

  Thank you

  Onditz

  Hi Onditz,

  Previously, I also faced the same problem when working with Php as the Backend, the problem is that Flex does not call your PHP page

  It is the way I solved it to export your Flex Project at Flex Release Build.

  Right click on the export of project---> Flex project---> Release Build---> copy all the files on your server where all of your PHP files are and then call the application from the browser

  http://localhost/test2/sample.html. »

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• connection problems with the version 6.18.0.106

  Hello

  I have Windows XP and I have always used an earlier version of Skype, but now the old version is retired and I can't use it. So I download the new version 6.18.0.106, but this one has a connection problems. Every 4 seconds, I am offline and then online again for 4 seconds. My connection is OK and my provider does not block Skype calls. Is there anyone who knows how to fix?

  Try to uninstall the latest version and install the older version of Skype 6.14.0.104:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Problem with the Compaq 6715 network s

  Dears

  I have compaq 6715 s running windows XP SP3

  I have a problem with my network connections, whenever I am connected via the LAN port Ethernet, wireless connection is automatically disabled and I can't enable it.

  is this normal or should I do something to use both connections at the same time to connect to two different networks.

  Thanks in advance for your support

  Hello:

  This is perfectly normal, and you can fix it easily also.

  Go into the BIOS and in the sub-menu of device configuration, modify the LAN/WLAN, set active to disabled.

  Save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  Now the wireless stays on when you connect by using a LAN cable.

• Problem with the IP vs network Hotsync computer name

  Hello-

  I have a TX, a Windows XP workstation and a wireless router.  I play successfully hotsyncs network via WiFi.  A snag, however:

  My workstation is configured with a static IP address.  In the TX Hotsync page, I can use the drop-down list for 'Select PC' and manually enter the IP address.  HotSync will work.  However, on the next go-around, I see that the IP in the drop-down list box HotSync has been replaced with the name of the computer to my workstation.  If I try to hotsync with it, I can not connect.  So I once again 'Select PC' and manually enter the IP address... and it works.  The problem is: I have to manually enter the IP address whenever I want to hotsync.

  Is there something I need to change so that the TX will find my workstation by using the name of the computer instead of the IP address, so I can just click on the button and go?

  Thank you!

  Well Yes, strange...

  Thank you.  Everything you mentioned had been done and already checked.  As I have noted, I have HotSync successfully through the IP address.

  Anyway, the next thing I did was to set the TX for static IP address.  That did not help.

  I read that the computer names are handled via NetBIOS and NetBIOS is often blocked by the default firewall.  I went to F-Secure and added about five rules to allow TCP traffic and WINS over TCP and UDP, specifically for static IP of the TX.  Voila... I have hotsync using the name of the computer.

  Now, it happens by a stranger...

  I started to remove the rules one by one, to see which actually caused to work properly.  Funny, it is... I removed - all - of the rules - and it still works.  Even after rebooting several times throughout the process.

  Then maybe some settings in F-Secure is a not 'paste' originally, and after going through the process and all still rested back upward.

  I don't know, but I'm happy now.  ^_^

  See you soon!

  Message relates to: Palm TX

• Several problems with the router WRT110

  First of all, the router disconnects randomly. As in, the router stopped broadcasting and will not be displayed on the list of the available when it arrives. When this happens, no wireless device cannot connect until the network resets.

  Second, whenever a wireless COMPUTER connects to the network, all network connections are lost for 5 to 10 minutes. However, this does not work when I connect other wireless devices to the network, such as my XBOX 360 console.

  Why does this happen? I'm tired of the random disconnection!

  Make sure that all Vista and Win 7 computers have IPv6 disabled under the properties of the LAN parameters for each card.

  WRT110 should have firmware version 1.0.04)is ou.05.  Disable UPnP in router.  Settings wireless Beacon Interval 75, threshold RTS and Fragmentation 2304, channel 1, 6 or 11.

• Bluetooth connection problems with the recent update of IOS

  I recently updated my iPhone 6s with IOS 9.3.1 update. Since then, my phone calls are inaudible in my car with my Bluetooth. I deleted the device in my car and turned off and restarted my phone, but my iPhone is not discover the Bluetooth in my car. Any ideas on a fix?

  Sorry, I can't offer a solution but I wanted to get this thread to keep up-to-date.   You aren't the only one with this problem.  I have an iPhone 6 s + and with IOS 9.3.1 update, calls I am doing in the completely distorted sound car.  Also appears that Bluetooth is disconnection/reconnection intermittently.

  Just found the problem today so I did not go through the process of removal of device re-matching, etc.

• Problem with the search for network path

  We have experienced a weird problem recently with our research. On a Windows 7 Machine, when you search for a file that is located on our file server, it will give you the files, but for ancient dates and not the most recent. In our case, when we find a file, I see the file is there but I do the search in the folder and it gives me no element matches your search if they have changed the 7/17 and later. Something before 7/17 is always available.

  I tried indexing, but I know that this will not work because it is a network location. Maybe is something that is wrong on the side of servers? This is a server of 2012. We have about 10 users affected by it, so the solution to the index of the network as a library location may not be enough and may just take us longer.

  Any ideas on if it's the workstation or the server? If so, what can be done to fix this? Any help is greatly appreciated!

  Thank you

  Andy

  Hi Andy,.

  The query is better suited in the TechNet forum, ask you to report the query in the following link to get the problem resolved.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Respond us if you have any technical questions and we will be happy to help you.

• the wireless signal coverage signal strength is good, but the problem with the health channel network overlap more

  Hello everyone

  In our project after the implementation of the wireless project

  I had done the survey for heatmaps wireless post

  I had signal strength is good for what - 67dbm for 2.4 & 5 ghz

  but the problem that i am facing with bad network health and overlapping of channel are more

  controller to change the autotunning for the channel for a floor for 2.4 and 5 ghz and some APS change us 2 emission power

  for a floor that we tuned we receive good channel and network health overlap report for combined 2.4 and 5 ghz

  but for the single report 2.4 and 5 ghz, report overlap health network and channel are not good

  postsurvey tools that I use for ekahau

  When I use the ekahau tool each time tool message upgarded last skip version or version

  for postsuvey basically for the heatmaps approved as

  1 power the signal should be-67 or de-65 dbm

  Support in this regard will be highly appreciated.

  Wait a second.  I saw this card before floor!

  Are there two of you working on this issue?

• Problems with the published variable network shared

  Greetings,

  I have difficulties in obtaining data on the network.  I can see that the editor SV will correctly the data, but the customer (lu) variable is an empty string.  I don't get any errors and I also checked the IP addresses in the alias files are each corresponding machine on their deployment.  One last point, it is that the two pieces of code is in form vi, none are yet exes. I have to say the PC Editor I want to share the data to the specific IP subscribers?  Please tell me what I'm missing.  I used variables shared between machines before but not through a server.

  Concerning

  Look at the computer registry option in the menus of LV.

• Problems with the network controller

  Hi, I have a problem with the driver for network controller. I mean my wireless does not work... it connects to the router, but it still has this yellow warning and will not connect to internet. I tried everything and it doesn't work. I have not found a pilot wireless on the hp site. I have a HP laptop model 15-r020sq.

  Hi, I used the driver that you post. Now I have the same problems as before. I went over the details of the driver it's what he know upstairs: PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

• [WRT1900AC] Problems with the subtitles (.) (SRT) with. MP4. AVI and others. MKV videos

  Hello

  I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server.

  I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and others. MKV seems simply do not find subtitles.

  All of these videos with. SRT subtitles, I can watch properly on my Mac or directly into the USB port on the TV, which seems to clearly be a problem with the router or some settings.

  I tried to rename the extension of the file from. MP4 and. AVI to MKV, but also did not work.

  Are there other settings that I can do?

  I suggest you use a software of 3 rd-party, which we are not trained for, that can integrate the file of external subtitles for YouTube videos. Media Server is a router feature that will allow you to stream multimedia files to your DLNA or active UPnP devices within your network. With this, external subtitles as SRTs file may or may not be detected because it is not a file of DLNA support.