Failed to access memory card in the universal card reader

Similar Questions

• says «Download and install the driver for memory card reader»

  Have a HP Compaq 2510p laptop with Window 7 Professional. In the center of the Action, it is said to download and install the driver for the memory card reader. When I do that, it says the following:

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Internet works and tried repeatedly, without success. There is also a vertical line on the screen of the computer that is still increasing so much width every day. Is this related?

  Thank you

  The vertical line is a strong indication that your screen is failing.  You will need a technician to replace it.  It will be not cheap.  Make sure that they install EXACTLY the good screen.

  Your computer is capable of displaying web pages?  If so, it is online and there is another problem that causes this download produce this message.

  Go to the HP support website and find your computer model.  Then find the driver, you need and download and save to your desktop.  Once you do this close the browser, and then double-click the update of the driver.

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Pavilion HPE-560z: Pavilion Elite Desktop - replacement of the memory card reader

  Hello

  My memory card reader began acting after 5 years of use. It detects the media all right, I can see the list of files, but when you copy them, the LED will market and file transfer is extremely slow. I would like to replace the card reader.

  Anyone know which internal drive is insert in the case of my hpe-560z Fund? Can we all 3.5 "card reader or there are specific requirements to pay attention to the?

  Thank you.

  Hello

  Please ysé part number from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XX094AV

  who is 575842-001 for Memory card reader-15 IN 1, slot 4.

  You can buy through top of store or try at Amazon:

  https://www.Amazon.com/HP-575842-001-USB-15-in/DP/B004A8JIO2

  Kind regards.

• Satellite L670-DX1 - after the installation of SP1 cannot use the memory card reader

  Hello

  Since I upgraded my Satellite L670-DX1 of Win7 64 bit to Win7 64-bit SP1 (2 days ago) I can't use my memory card reader, he always says it is a bad card and I should reformat the card with any card.

  Does anyone have a similar problem or better yet a solution for me?

  Greetings

  You have installed SP1 using Windows update option?
  Have you tried to roll back the OS to an earlier time to see if the card reader is working properly again?

  Have you tried reinstalling the driver of the card reader?

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot read the data in the Micro memory card reader

  Original title: Micro memory card reader

  When I plugged in my card reader to the USB port windows says that the device has been installed and ready, but my pictures came not, where should I go to find them. Am I missing something?

  Hello

  1. What happens when you connect the card reader to a different USB port?
  2. Are you able to see the pictures when connected to another computer?

  I suggest you save that data if it works on another computer and then try to format the card reader to the NTFS file system

  How to get in shape?

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the Navigation pane, under storage, click Disk Management.

  3. right click on the volume that you want to format and then click on format.

  4. to format the volume with the default settings, in the dialog box format, click OK, and then click OK again.

• DM4 memory card reader won't read the Extreme Pro Sandisk SDHC card

  I have a dm4-1201us and the built-in memory card reader will not read my Sandisk 16 GB SDHC Extreme Pro memory card. I can read with an external drive, but prefer to use the internal drive. I think that HP needs to update the memory card driver reade.

  I solved the problem by inserting the memory card into the internal drive. Then I opened the Device Manager and found the drive, which was a mistake on the Bill. I deleted this device and check the 'delete the driver '. I did a restart and now it reads SDHC cards.

• Where can I find the driver of USB memory card reader software?

  Where can I find the driver of USB memory card reader software? I checked on hp.com, but he's not here.

  I use the HP Compaq dc7800 Small Form Factor and Windows 7 Home Premium SP1 x 86 and p/n: AQ532US #ABA

  Hello

  You can ask HP support and in their forums. Maybe it's an older driver still used or HP
  is wrong has not posted.

  This is the Realtek site, but he could not be there.

  Realtek - downloads
  http://www.Realtek.com/downloads/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• OfficeJet 6500 - memory card reader is not available

  Hello

  I have officejet 6500 connected to the router by ethernet cable lan in the House

  Windows XP SP3

  I can print and scan from pc

  but cannott access the memory card reader

  the card is observed in the management of resources but is not in disk management

  an error window says (approx. translated from Italian message).

  Z: / designates a position is not available. Could be a hard drive of this computer or in a net... etc.

  Thank you

  Hi Pier29,

  I want to help you with this. Follow the steps I found posted by @pcwizard

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

  Note: replace the 192.168.1.101 with the IP address assigned to your printer.

  5. click on finish, and the Player opens for access to the files

  If it still does not work, look at the following memory card troubleshootingdocument. If however this does not resolve the problem, please let me know, thanks. I cross my fingers.

• How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c desktop PC

  I bought a desktop PC computer given to nine HP Pavilion 500-027c Wal-Mart, 2 weeks ago... 5-in-1 memory card reader does not work... the Device Manager indicates that it works correctly, but when I put a memory card, nothing happens... The white light will come on indicating that the memory card has been inserted, but the computer does not recognize that something has been done... I would just replace the card reader itself... I see on the hp support where it is possible to replace the reader of card memory (before I/O), but I don't know where to buy the card reader itself real... I have no card on the card reader either... Help, please!

  Hello

  You can find a list of the parts for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=H5P68AA

  What card you use, the machine only supports the following cards:

  • Secure Digital (SD, SDHC, SDXC)

• memory card reader does not

  Compaq Presaro CQ3000 model series CQ3420AN memory card reader does not read SD cards.

  Where can I find download original driver.

  HP have replaced the Flash drive since it was a hardware failure. Now it's working.

• Uninstal a 15 in 1 memory card reader

  have a HP desktop computer. Model h8 - 1240t

  15 - n 1 memory card reader is no longer recognized by the computer. I want to uninstall it and bring it to a repair center to see if it works.

  HP told me to restore the computer to a time before the problem occurred, but I prefer to remove it to be tested all first.

  Do not find hoe to remove it

  Hello

  There is a guide on how to remove this (including a video preview) on the following link.

  http://support.HP.com/us-en/document/c02897927

  Best regards

  DP - K

• Digital Memory Card Reader - updated driver required

  Where and when can I get an updated driver for the internal memory card reader?
  I just tried to format a 8 GB Sony Memory Stick, but can only 3.5 GB format - after discussions with Sony and re-formatting on a Toshiba laptop not quite new, I reached the full format of 8 GB.

  However the Satellite cannot read the card :-(

  Published by: ADMIN

  Hi Martin

  Compatibility with memory cards depends on the available hardware and not software!
  This means that a update driver card reader won't help you!

  First of all, you should check your user manual to see which cards are compatible with your internal card reader!
  Generally, these details can be found in the manual pre-installed.

  Model of laptop you know me not, but I doubt you'd be able to use the 8 GB Sony Memory Stick. Perhaps the size didn't is simply not supported.