Failed to add the source of data for local SQL Server Express

Similar Questions

• Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

  I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

  When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

  My test was then on the 6th and last instance and went well.

  When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

  If I have one of these printers connected to the 6th port, it worked fine.

  I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

  I tried to add the port via the registry - he added, but would not yet print.

  Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

  I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

  I modified the local security policy to enable users to add printer drivers.

  And I have now run out of ideas! Someone at - it a?

  Thank you

  This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

  So it's fixed

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• Hardware requirements for MS SQL Server for about 100 concurrent users

  Can someone suggest the hardware configuration required for MS SQL Server for about 100 concurrent users?

  Microsoft page suggests 2 GHz CPU and 4 GB of RAM, but it does not mention the number of users. Wonder how many users affects the performance of MS SQL.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

• Getting error: could not open the Virtual Machine: failed to query the Source for more information

  When I have a virtual machine to export to the FVO on an ESXi 4.0 and then try again to import the FVO on VMware Player or Workstation 7.1, I get the following message:

  «Could not open the Virtual Machine: failed to query the Source for more information.» I can successfully re-import this file OVF in an ESXi server without any problems. Anyone know why this is happening and what can be done to remedy this?

  Thank you

  Christopher

  Hello.

  Try to use ovftool to convert a VMX of the FVO.

  Good luck!

• How to add the source database

  On the source database server have 4 instances.
  I already have install Oracle Audit Vault Agent on this server.
  And when I add the source source DB user, I can't found all role (e.g. DV_ACCTMGR) DV
  
  My approach is
  On Server1 (Audit Vault Server)
  -Install Oracle Audit Vault Server to Server1
  -addagent on Server1 «avca add_agent nom_agent - HOLTUU1 - agenthost 192.0.66.87»
  
  The server Server2 (Audit Officer Vault)
  -on this server have 4 instances
  -Create user 'oaudit' OS, create ORACLE_BASE ORACLE_HOME
  -Install Oracle Audit Vault Agent
  
  I mistaked perhaps one or more step.
  Please suggest me

  Dear suredch,

  Yes you are right, this will create a new House and you need to change the House to use AV agent.

  and the 2nd is the difference between the AV and DV?
  they are all two different products. you don't have to be confused. There is no need to use database on the database.you source vault can add your source database to server AV without database Vault.

  and ultimately that ask you database configurations, dear they are the recommended settings, you need to do to add data source to av server.

  Well my dear you can personally send me on [email protected] so i can give u a full doc include the entire process step by step, I used in my scenario, it would be the best practice for you. and you fight understand.

  Concerning

• 836: failed to create the shared memory data, error 22 store segment

  Hi, I am new to timesten and databases in general, and I'm testing the database timesten to test.
  
  I am running ubuntu linux in virtualbox and have java 6 is installed. So far, I installed the timesten database and configured the sys.odbc.ini to create a new database. However, it seems that I can't connect to a database.
  
  I connect with the orattadmin of the user (which belongs to groups both timesten and ttadmin)
  
  I run the commandes./ttenv.sh and I have the classpath for ttjdbc6.jar in it.
  then I run le./ttisql.sh, and when I try to connect to mydatabase or any other database present in the sample folder I get:
  
  $. / ttisql
  
  Copyright (c) 1996-2011, Oracle. All rights reserved.
  Type? or 'aid' help, type "exit" to leave the ttIsql.
  
  
  Command > Connect "dsn = mytest_ttdb";
  836: failed to create the shared memory data, error 22 store segment
  The command failed.
  
  what I am doing wrong? What can I do?
  
  Thanks for your time

  A data store active TimesTen consists of a single shared memory segment allocated from o/s. The size of this segment is PermSize + TempSize + LogBufMB + ~ 20 MB. This allowance will not allow the o/s unless the 'package' kernel parameter has a value greater than the requested size of the segment. According to the Guide of Installation TimesTen, you set various parameters of the kernel on the appropriate values (memory shared, semaphores, etc.).

  Chris

• WS-Security and proxy service: failed to add the identity security token

  What the reason of 'Unable to add the identity security token' fault in this situation (10.3.1):
  
  I did a simple proxy service "hello word" and tried to link custom policy.
  
  WS-Policy is planned:
  
  < wsp WSU: ID = "WS-Policy-Siebel.
  xmlns:SP = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702".
  xmlns:WSP = "http://schemas.xmlsoap.org/ws/2004/09/policy".
  xmlns:WSU = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < wssp:Identity
  xmlns:WSSP = "http://www.bea.com/wls90/security/policy" >
  < wssp:SupportedTokens >
  < wssp:SecurityToken
  TokenType = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken" >
  < wssp:UsePassword
  Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" / >
  < / wssp:SecurityToken >
  < / wssp:SupportedTokens >
  < / wssp:Identity >
  < / wsp >
  
  Process of WS-Security is set to "yes".
  
  During debugging, I see that all works fine - I can authenticate with the defined credentials and breakpoints in the proxy stream service works very well.
  
  But in the end, I get the error:
  
  SOAP fault:
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
  < env:Header / >
  < env:Body >
  < env:Fault >
  env:Server < faultcode > < / faultcode >
  < faultstring > cannot add the identity security token < / faultstring >
  < / env:Fault >
  < / env:Body >
  < / env:Envelope >
  
  In the console:
  < 09.06.2010 17:39:18 MSD > < error > < OSB security > < BEA-387023 > < an error occurred during the processing of incoming web service security response [error code: F]
  [Ault, message-id: 1721282272521583996 - 57dc4ccc.1291cc2282d.-7fab, proxy: OSB project WS-Security/WSSecurityService, operation: NewOperation]
  -Error message:
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > United Nations
  able to add the identity security token < / faultstring > < / env:Fault > < / env:Body > < / env:Envelope >
  weblogic.xml.crypto.wss.WSSecurityException: failed to add the identity security token
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
  at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
  at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
  Truncated. check the log file full stacktrace
  
  Incoming soap message is:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
  < wsse: Security SOAP: mustUnderstand = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
  < wsse: UsernameToken WSU: ID = "unt_TNNp0cBwU7HyPKoq" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < wsse:Username > testuser < / wsse:Username >
  < wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > testuser < / wsse:Password >
  < / wsse: UsernameToken >
  < / wsse: Security >
  < / soap: Header >
  < soapenv:Body >
  < wss:NewOperation xmlns:wss = "http://www.troika.ru/Enterprise/WSSecurityService/" >
  < in > chain < /in >
  < / wss:NewOperation >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  Edited by: L. Andrey on June 9, 2010 17:55

  You are the WS-Policy liaison to the entire operation or only for the query part of the operation. If you link the WS-Policy for the operation, the policy applies as well to the request and response. If the response message also contains the WSSE headers with a name of user and password invalid. You can check this?

• What is the source of data 11.1.2?

  Hello
  
  What is the source of data 11.1.2? without the help of ODBC drivers how to connect to the back-end database. I need the flow for that.
  
  
  Thank you
  PC

  Hello

  I answered a similar question here > what is the data source 9.3.1? Is OLEDB supports ODBC
  If you didn't even answer or bother to mark it.

  Data source connections are driven by JDBC to communicate with the repository database and a JAVA API to communicate with essbase.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ORA-01994: GRANT failed: failed to add the users to the public password file

  Snoussi,
  
  our applications 11.5.10.2 and db 9.2.0.6 whenever I'm in the process of grant dba privileges to rman user sys, I get the below error
  
  ORA-01994: GRANT failed: failed to add the users to the public password file
  
  I created the password file and I've changed remote_login_passwordfile = NONE for remote_login_passwordfile = EXCLUSIVE lock
  in initSID.ora then I bounced DB but its showing again.
  
  
  SQL > show the distance parameter
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  real chain of remote_archive_enable
  remote_dependencies_mode string TIMESTAMP
  remote_listener chain
  Remote_login_passwordfile string NONE
  REMOTE_OS_AUTHENT boolean FALSE
  remote_os_roles boolean FALSE
  SQL >
  
  Here is my information in initSID.ora file.
  
  ----------------------------------------------
  #############################################################################
  #
  # END OF THE CBO SETTINGS SECTION
  #
  #############################################################################
  
  
  #---FIN OF REQUIRED OPTIMIZER PARAMETERS-
  
  #
  # Client settings.
  #
  Remote_login_passwordfile = EXCLUSIVE lock
  #EMOTE_LOGIN_PASSWORDFILE = exclusive lock
  IFile=/U05/Oracle/visdb/9.2.0/DBS/VIS_linux2_ifile.ora
  [oracle@linux2 dbs] $
  
  Published by: HumanDBA on June 9, 2009 04:06

  Danny,

  Do you use a spfile to start the database? If Yes, then you must change this setting in the spfile so (issue "show the spfile parameter' to check).

  Kind regards
  Hussein

• Failed to add the shared member

  Hello
  I get the following error message when I'm loading members at my request of essbase. I chose option 'Allow duplicate Shared Members'.
  Any suggestions to fix this please (without renaming shared members)?
  
  Error message: failed to add the shared member (CM): a duplicate member is in outline, but it is in another dimension.
  
  Concerning
  
  Chandra

  You can only add members with the name or alias from another dimension, even if the names of the members in double is enabled. I do not recommend this. This problem often arises because you have the same name in several dimensions. Like other having to product and customer and division. We generally get around it by prefixing or suffixing the names in a dimension with something like prod others, cust-other, div-others. Pourriez you either prefix the entire generation by using the prefix option in the rule of load or for some names of members by using the option to replace the rule of lod

• Best practices for the handling of data for a large number of indicators

  I'm looking for suggestions or recommendations for how to better manage a user interface with a 'large' number of indicators. By big I mean enough to make schema-block big enough and ugly after that the processing of data for each indicator is added. Data must be 'unpacked' and then decoded, for example, Boolean, binary bit shifting fields, etc. The indicators are updated once / sec. I'm leanding towards a method that worked well for me before, that is, binding network shared variable for each indicator, then using several sub-vis to treat the particular piece of data, and write in the appropriate variables.

  I was curious what others have done in similar circumstances.

  Bill

  I highly recommend that you avoid references.  They are useful if you need to update the properties of an indicator (color, police visibility, etc.) or when you need to decide which indicator update when running, but are not a good general solution to write values of indicators.  Do the processing in a Subvi, but aggregate data in an output of cluster and then ungroup for display.  It is more efficient (writing references is slow) - and while that won't matter for a 1 Hz refresh rate, it is not always a good practice.  It takes about the same amount of space of block diagram to build an array of references as it does to ungroup data, so you're not saving space.  I know that I have the very categorical air about it; earlier in my career, I took over the maintenance of an application that makes excessive use of references, and it makes it very difficult to follow came data and how it got there.  (By the way, this application also maintained both a pile of references and a cluster of data, the idea being that you would update the front panel indicator through reference any time you changed the associated value in the data set, unfortunately often someone complete either one or another, leading to unexpected behavior.)

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• 30 to 99 daily Photoshop requires an internet connection. What is the amount of data for this connection?

  Photoshop needs an internet connection after 30 or 99 days. What is the transfer of data for this connection? I ask, because I'm going to work on a ship for a long time and ROAMING costs are very expensive. Maybe it's possible via a mobile phone connection?

  [Left non-technical Forum Lounge for cloud... forum] MOD]

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  Hello

  PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  If Yes, can you please let me know.

  I took a glance at the reference of the cmdlet, but can not find...

  
  Kind regards

  Dreamer

  You can use the data store provider.

  It is documented in the vSphere PowerCLI Administration Guide that was installed with PowerCLI.