Failed to compile SWF - pre-test

Similar Questions

• Failed to compile swf CP8

  Hello

  I am trying to publish or preview a course of CP8, but I still have the same error message "failed to compile swf.

  I don't have special characters... I can't find the problem...

  Help!

  Thank you

  Try disabling all the compression options in the preferences > project.  The Advanced Compression setting is often problematic.

  If this does not resolve the issue, save a copy of the project and start to hide groups of slides and republish each time until it seems to work.  Then hide the slides in THIS group to find out who could be shifted upward in the process.

  If this does not work, remove all the measures put forward.

  If this does not work, copy all the slides in a new project shell and republish.

  If this does not work, your project is probably toast.

• Failed to compile SWF. How does it evolve?

  What causes this problem "compiling Swf doesn't have a Note: Please check if one of the actionscript keywords is used as a variable user name."

  I work at 8 Captivate and have already tried updating the INI file (not give me access to save or save on it). Addressed the issue of the 'space' as well. Have had no problem publish this file before. Made a change to the audio and now this error keeps popping up. I renamed the file and tried to publish. No luck.

  Here are some basic troubleshooting tips:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/basic-troubleshooting-tech wheat

  I suggest you try the suggested process of elimination to find out if there is a particular slide, causing the failure of the publication.  It could also be that you have chosen somehow inadvertently name an object or a slide in your project by using one of the 150 or reserved keywords that Adobe must use in the underlying code of Captivate.  So you have to go back the actions you performed before what is going on has begun and ask yourself if you have added an item or renamed something.  This could be the problem. (Include names of variables and advanced actions in this.)

• Drag and Drop Captivate 7: failed to compile SWF. Note: Please check if one of the actionscript keywords is used as a variable user name

  Hello

  I have a problem. I drag and drop as it should and that he played in 8 but when I try it on my laptop, I get the above error. How can I fix?

  Thank you very much

  Try to clear the cache of your project.  If this does not work, delete your preferences.  You will need to do it anyway since you said you reinstalled Captivate.

• LOOK for iOS, 'HelloWorld' fails to compile

  Flash CS 5.5 v11.5.1.349

  Windows 7 Professional SP 1

  I get the compile error when you post AIR for iOS (Flash Cs 5.5). It does not, what is wrong, said simply that he was unable to compile the files.

  "Error creating files.
  Failed to compile... »

  The application is simple - is the example Hello World in the help section, but it still does not work. (Of course, I have all the necessary certificates created.) What is even more interesting, the same fla without changing file compiles well on Flash CS5.5 my colleague, even if (11.5.1.349) versions are identical.

  The only time I get that error is when a file is in use (or Windows thinks it's) because he has started or selected in Windows Explorer, then you will fail to compile the SWF itself. Otherwise, do not hit browse and specifically defining the path to export product also the error for me.

  Is generated all SWF? If so, it has a size (> 0Ko)?

  One thing you should definitely do more than overlay latest Adobe Flash CS5.5 AIR. This will ensure that you have all the latest patches and updates to AIR for iOS. This may solve your problem.

  Download the SDK here:

  http://www.Adobe.com/devnet/air/air-SDK-download.html

  Instructions on layering (disregard the version number difference, simply use the correct number of AIR, you're coming to overlap instead, from 13 to 16):

  http://helpx.Adobe.com/x-productkb/multi/overlay-air-SDK-Flash-Professional.html

  I also recommend to download and update Flash CS5.5 to have the latest version of Flash Player. This is so you can target and test using the version 16 (11.3 flash drive). Here is the download page for the Flash Player the latest debuggers, playerglobal.swc, etc.. :

  http://www.Adobe.com/support/flashplayer/downloads.html

  There is not a lot of information out there on how to install it in Flash CS5.5 but I'll give you the general jist:

  -Close Flash Pro

  -Install 2 browser plugins (activeX and plugin according to the debuggers)

  -Download the "projector content Debugger" and crush the FlashPlayerDebugger.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Debug

  -Download the "projector" and crush the FlashPlayer.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Release

  -Download the playerglobal.swc (make sure that it has named exactly that), then navigate to the default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0

  -Create a folder in this path called "FP11.3" and place the playerglobal.swc in there.

  -Navigate to the default folder C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players

  -Duplicate the last FlashPlayer1x_x.xml file and name it FlashPlayer11_3.xml.

  -Change the file. Change the lines accordingly, the parts in bold are the changes:

  Flash Player 11.3

  Now you can restart flash and your target publication, you should see Flash Player 11.3 as target.

  To check 11.3 is installed correctly open a new AS3 document and paste this code and then run it using the DEBUGGER.

  Do not simply press CTRL +, it is just a player. Use CTRL + SHIFT + ENTER. You should now see the version followed 11.

  Here is the script code of the simple framework:

  import flash.system.Capabilities;

  trace (Capabilities.version);

  For using the debugger (CTRL + SHIFT + ENTER) I see: WIN 11,3,300,257

  For me using just came out (CTRL + ENTER): WIN 10,2,153,2

• Ability of pre-test in Captivate 8

  I want to create a pre-test that will determine if new recruits are qualified to take a proficiency test to determine their level of proficiency with electronic medical records system, that our organization uses.

  If new recruits meet the requirements of the front test, they can take the proficiency test.

  If the new recruits do not meet the requirements of the front test, they must attend a class.

  If a new employee "fails" the pre-test, is there a way to generate a results page (for printing and fax to human resources) or generate and send an e-mail? I'm looking for a method informing human resources that the new employee did not meet the requirements of test & must attend a class.

  (FYI... this quiz pre-test & jurisdiction will live outside our LMS because new recruits will not still have use ID or access to our Intranet.)

  Thanks in advance for any help!

  Captivate can certainly offer the possibility of creating a pre-test and a Quiz in the same project.  There is however, no possibility to automatically send an email without requiring the intervention of the person doing the test.  To do this you would need to have done custom coding so that data has been adopted by the Captivate module to a page server sending the e-mail.

• RH10 made double path to some images and fails to compile HTML Help

  I have a project which has been upgraded several times.  RH10, until he has worked and still works in RH9.  RH10 fails to compile this project and "Stops working" in Win7-64.  This project has been removed from the version control that did not fail, but did test a lot faster.

  Towards the beginning of the 2 pop-up warnings compiling on the two images, we use as bullets that she, that the source does not exist.  There is no it's because it's doubly path (example: D:\project files\testproject\D:\project project\WarningSymbol.jpg 'cannot be copied to' D:\project files\testproject\!) SS! \Microsoft_Html_Help\! chm_temp_folder_0\D:\Project project\WarningSymbol.jpg. reason: source does not exist.

  Go figure, the path is stubborn.  I tried to search for all styles and all pages for the use of these images and buried somewhere in this project is a hidden link in the code that I can't find.

  In addition, the last file compiled prior to the stoppage has been redone so I think that this topic is ok.  I cut all of the text pasted into Notepad and replaced and reformatted to ensure there's no hidden strange characters.  No luck.

  Has anyone seen this?

  DV

  After messing around with this for a few days, I went back to the working version RH9 project, copied to another folder and opened in RH10.  It's working now.  Something in the previous conversion or something after the conversion to corrupt the global variable and other links.

  It seems to work now.  Good thing we saved.

  DV

• Setting a conditional Action for pre-test questions: skip content slides

  OK boys and girls, let's see if this is even possible in a course of SCO, or if this solution multi-SCO (which means I'm toast, because we do not have the multi-SCO aggregator)?

  I want to implement a prescriptive pre-test. In my ideal world, the answers to each individual question would either enable or disable the content related to the question slides. If the user passes the pre-test, they might opt to skip the prescriptive stuff and complete the course. If the user fails the pre-test, they should consult the active content.

  Is it still possible in a unique world of SCO?

  Justenuf

  Will try to explain how I would try to handle this use case, but I didn't try it!

  • For the first condition, you already have a system variable which can be used in conditional actions to check if the user has passed the pre-test. If you use ordinary question slides, cpQuizInfoPassFail will be set to 1 if it is adopted, the value 0 as var is full only after the last slide in the question. If you use slides before the test, you will need to create a variable user, which you can fill with a tip action, based on the value of cpQuizIntoPretestPointsscored or cpQuizInfoPretestScorePercentage.
  • To follow the questions they did correctly, you must create a variable user for each slide of the issue, default = 0. Based on the system variable cpQuizInfoLastSlidePointScored, which is completed after each slide of the question, you can switch the variable user of the slide of the previous to 1 question if this sys var is greater than 0. This can be done by an action at the entrance to each slide of the question. You will need such action on enter also immediately after the last question slide (maybe on a blade of results, where you can also put the appropriate button to switch the content slides, or offer the possibility to go back).
  • For each slide content you will need another (conditionala tip enter action. Condtion will check the value of cpQuizInfoPassFail (or the equivalent for the slides before the test) AND the value of the var related to this question slide. If both are positive, ignore the slide (go to the next slide), if not, just stay on the slide. That action will be the same for all the slides in content related to a question. But another question, you will need a duplicate, because another user variable will be there. If you use CP7, this is an excellent example for joint actions.

  Hope this helps a bit, sorry that I am so busy.

  Lilybiri

• How to change the "Failed" result State after the test of "success."

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  Alteschwed wrote:

  We do a picture of a LCD screen and watch if his work of all. Sometimes, the LCD is good work but the step failed. Where automatic LCD test fails show us the image of the camera to the user and it can decide if the LCD for success or failure. So when the user decides that the screen is good job we have to crush the status of the automatic test demonstrating lcd screen test passed in the report and the database. I tried with

  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.Status = "Passed",
  RunState.SequenceFile.Data.Seq ["Check_LCD_V3-0"]. Hand [' 154 Execute - all horizontal Segments on "]. Result.PassFail = "True",

  But in the basis of the status of this step is always 'impossible '.

  What I've done wrong?

  Thank you

  I recommend the following:

  (1) that the display automatically to test an Action step rather than a step for success/failure and set to square one local variable to see if the LCD self-test failed (for example Locals.AutomatedLCDFailed).

  (2) create a new test pass/fail (using the no adapter) that takes both the variable local and entry of the user account to determine it is the condition for success/failure (for example to set the data source of the step to an expression like:!) () Locals.AutomatedLCDTestFailed & Locals.UserLCDTestFailed)

  As an alternative to do 1) a step of the Action you can leave a step for success/failure and clear step on it to "step failure causes failure of sequence. You can then use the status of this step instead of Locals.AutomatedLCDTestFailed. The only difference is that the automated test will always be displayed as failed in your report, although the sequence can still be passed. It is somewhat a matter of preference.

  Hope this helps,

  -Doug

• Pre-test Question slides crashing my project

  Hi guys,.

  Here is my weekly 8 Captivate question! (I learned to love how it should still be in beta...)

  I want to insert a question slide multiple choice, as a pre-test, but whenever I click on OK, captivate crashes just downright. None of the error messages or the bug report dialog appears, he just died.

  I have restarted the machine several times, and only made sure no other software is running.

  I really want to like Captivate, I do it, so I hope someone can shed some light on this issue, one of the many questions I have met since the purchase of this product.

  Here's my spec;

  Mac Pro (mid-2010)

  2 x 2, 66 GHz 6-core Intel Xeon

  24 GB RAM

  ATI Radion HD 5770 1024 Mb

  OS X Yosemite 10.10.5

  And i've got to always available storage.

  Help, please! Thanks for your time.

  Karl

  * Update - installed the 8.03.290 patch. Now, ALL blocks Captivate! I have no problems with other products Adobe, or any other application.

  You can try if this also occurs in a new project? In this case use the CleanPreferences, please.

• Is it possible to change the question from pre-test to noted after you create the slides?

  I created a quiz, but all except a slide is in test mode. Classified is grayed out.  Is there anyway to change it now or should I recreate?

  Thank you!

  There is no way to 'upgrade' a question of pre-test to a normal question of graduate, sorry.

• Pre-test is grayed out

  I am doing a quiz in a pre-test, but the option is grayed out.  Any ideas as to why?

  

  You cannot convert a slide of ordinary matter in a slide before the test, in fact, this drop-down list is a bit confusing.

  Pre-test slides are different "beasts", you must insert them using Quiz, option to insert before the test Question slide. The results of the test are stored in different system Quizzing variables.

  ATTENTION: Playback bar will be turned off for the whole project when using slides of pre-test and navigating with the table of contents also became disabled.

  Lilybiri

• Pre-test: random question bypass

  Hello

  We were asked to do pre for a course, but with random questions to stop collusion

  Is there a work around?

  Renovator rgds

  Is not possible out of the box with the functionality of pre-test now available. In previous versions, I used question slides custom for this questions that I created using standard objects, where the score has not added to the total of the Quiz but stored in a user variable. But you have no question randomly either, so no possible. Don't see a workaround solution, unless you do not have to report to an LMS. Any questions at random, you have to use the normal question slides. It is possible to keep the score of the 'test' in a separate user variable, making decisions as branching based on this variable, create a slide of score as well for the pre-test and test but what a statement to an LMS that all quiz slides will be considered part of a Quiz and the score will be the total of all the slides in quiz score.

  Lilybiri

• Pre test do not branching

  I followed the Adobe eLearning channel video and set the pre-test action... PointsScored is greater than 40 (as it has only 4 questions worth 10 points each).  The Action is Advanced section break, or Else section break starting.  On taking the pre test success or failure, I get to the beginners section.  What Miss me?

  Thanks Jo

  Hi Joanne,

  Thank you to the Adobe community. Please accept my apologies for the inconvenience.

  I tried the same thing at my end it works. The reason why it does not work on your side because in your advanced action Else statement runs. The reason behind this is that you have only 4 questions worth 10 points each and your if is stated in stocks advanced says that it must be more than 40. In order for this to work you must have at least 5 questions or set statement as "is equal to 40. In addition to this please make sure that you use the variable cpQuizInfoPretestPointsScored you have a pre-test Quiz.

  I hope this helps!

  Thank you!

• How to do a pre Test in Captivate 4

  I am currently research in Captivate 4 buying at work, which should be our new E-learning development tool. One of the features offered by our current development tool is the 'test '. This allows to implement a quick assessment at the beginning of learning online and they are according to the questions (or partition) is wrong, he will recommend the modules, the user must take (or it hides the modules they have already mastered).

  I installed the trial of Captivate at home and work my way to learn all that. I understand that it has no function predefined to create a 'pre-test '. But can someone tell me if this can be done in Captivate 4 and if so... How can I do it please?

  I really don't mind if I have to learn about variables, coding and same action script (God help me!)... but I'd really love to have the opportunity to do this Captivate 4.

  Who helps out... is my new best friend!

  Thank you

  Hello

  Already posted a small response this morning when I was in College, but see now that has not happened.

  It is not so easy to make and pretty hard to explain. Would be easier with an example, but it will give a try with text and photos first.

  1. You will need to create your legitimate question slides. In my example I had simple yes/no questions, so I had to create Yes and issues of non-boutons on each slide. I wanted to give immediate feedback to the user; That's why I've created two text captions (one for the answer-Yes) and another for non-response, initially hidden on the question slide.
  2. To store the response of the user (yes/no), I created a user for each question slide variable (e.g. v_question1 v_question2...). In my case, this variable could have two possible values: 1 or 0. When the user has clicked the Yes button, a tip action was performed: the user variable has been set to 1 and the right text caption has been demonstrated. The user should then click a button "Next" to proceed to the next question. A similar tip action was triggered by clicking on the button, where the user variable has been set to 0 and the other illustrated text caption
  3. When all the question slides are complete, the user can slide "menu. I show not all 'modules' initially with a button, used to access the right slide. Triggers a tip action, entering into this slide, I have check user variables and I shows according to their value (value = 0) or hide (value = 1) the button right of the module. If the user cannot open the modules proposed to see. Join a small snapshot of this slide:

  
  And part of this last advanced script:
  
  I hope that gives you you started?

  Lilybiri