Failed to configure repository transfer

Similar Questions

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• 187 updates fail to configure

  SOMEONE ANYONE HELP ME PLEASE UNDERSTAND WHAT I HAVE TO DO TO GET NEW RIGHT. My computer came with 7 home pro, got the "upgrade" to 10, and if Microsoft said that my computer could run 10 he couldn't. I spent 12 + hours trying to get Microsoft to link me to an ISO of 7, which has installed successfully (to my surprise), but now I have 187 updates that fail to configure... It is down right stupid. I tried 6 times and just cut them, because it takes all day to download install and fail to set up, and then go back... Then, disgusted and disappointed by Microsoft for their lies and betrayal about 10 by being able to run on my computer... I had a great computer to work, now I have a $1 300 POS. In addition, this can be important information, I now have a partition on my HDD called H, which was not there before 10, I opened it i and he claims, there is nothing here, yet its properties show 59.8 MB free of 99.9 MB... I have no idea what it is.

  If you have win7 now did you visit the support site for PC manufacturers to install the necessary drivers?

  Manually, run windows update, select 5 important updates and install.

  In the update of the victory, settings uncheck recommended updates, if selected.

  Forget the partitions until the update of victory is resolved

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 13 Windows updates fail to configure when installed manually, one at a time

  I just bought this gateway DX4375 a couple of weeks with pre-installed Windows 8 and had 86 important to install updates. Whenever I tried to run the update, they could not set up and took hours to undo changes.

  I've refreshed the operating system reset a couple of times and even including erase the disc without success after trying to fix the problem with all of the recommendations of Microsoft.

  Finally I tried to install them all manually one at a time. 13 (attached) of them would not move because he could not set up and kept breaking the updater. Some of them even caused the update history to be wiped and all downloaded updates deleted.

  I ran to the resolution of the problems of updating to correct errors, but they would still not set up. Even with the updates that are successful the updater is often broken and requires repair. Components Updater tool finds errors, but is unable to correct all automatic reset of Microsoft running. (attached)

  DISM.exe/online/Cleanup-image /Scanhealth ran, /Restorehealth Cleanup-image DISM.exe/online and SFC scan does not. I can't update Windows 8.1 because there was no product key supplied with the gateway DX series desk top and updates failed is KB2871389 (the update needed to store) that fails to configure.

  

  Thanks Vijay, but if you take the time to read my post that you will see that I tried many scans including SFC on more than one occasion. When I finally got the 8.1 update win with the help of Microsoft problems disappeared.

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• What should I do when my updates fail to configure? I can't even open a file that contains pictures in it unless it closes.

  I tried to install "major updates" but they were not for a long time.  Today, they were finally installed, but now they keep do not properly configure and go back.  Now, the mousepad on my laptop does not work and when I try to install the driver for it, he said also that I have to restart my computer to complete the installation and when I do, the updates fail to reconfigure and im in box departure.  Ive tried everything but try to reinstall because I don't have the disc here with me.  Is that what I can do because it becomes really frustrating that I can't even look at pictures that are in my folder of photos without windows stops.

  Hello

  1. what happens when you try to install the updates one at a time?

  2 when you install updates one at a time, that update are you facing issue with?

  You can file system Checker [SFC] scan on the computer that will replace the missing or corrupted files and try to install the updates one at a time and check...

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Windows updates fail to configure

  original title: Windows updates

  My updates were install great so far and it is said that they have failed. Can not configure correctly and returns to changes. Help, please.

  Hi zourdanihamid,

  Follow the steps in this document to resolve the problem with the installation of Windows updates.

  Let us know if that helps.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• Windows 7 fails to configure updates "returning from the changes.

  Hello

  I get this message after Windows tries to install updates at startup... "failure of windows configuration updates from reinstatement of changes"

  1. once I get this message that I start correctly on Windows and that my system works ok.

  2. Windows 7... 64-bit... .latest service Pack installed.

  3. it was an upgrade of Vista 64 bit... but works very well since 8-2010 when I installed Win7

  4. I ran sfc/scannow and it reports that everything is ok

  Any ideas?

  Thanks in advance

  Thank you that worked for me even if I don't have to go to the Microsoft download website.  I checked the history of update and there were a few who failed to update.  He said there was updates had to wait to be downloaded so I clicked on that and then selected the updates, click on the bottom. I think he may have said then or download it now.  It took me back to the update page where I chose to update.  Which corrects the problem.  I have them one at a time incase there was a special that was causing problems, but they fine all the updates and my computer restarted normally

• Need help from blackBerry - failed to connect Bluetooth transfer files from Sony Ericsson Smartphones

  I just bought my first Blackberry Curve 8900 and I can't transfer my contacts from my old phone, Sony Ericsson W660i, to my Blackberry. It says bluetooth connection failed. I was able to pair the devices, and it's ok. I can't yet to transfer files images of my Sony to the Blackberry. Can anyone help?

  Thank you

  Great, please mark the thread has been resolved for you, better for users with the same question, thank you.

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• Failed to configure the data source for EPMA in 11.1.2.3

  I'm updating 11.1.2.1 to 11.1.2.3 via update on Windows 2008 R2 64 bit
  
  4 .NET installed.
  
  I get the below error.
  
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-07303] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.awb.config.AWBDBConfigurator] Oracle Data Provider for .NET entry does not exist in C:\Windows/Microsoft.NET/Framework64/v4.0.30319/CONFIG/machine.config, install it before configuring the repository of EPMA
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] error: []
  com.hyperion.cis.config.ProcessingException
  at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:145)
  at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
  at java.lang.Thread.run(Thread.java:662)

  In accordance with the exception.
  *

  Oracle Data Provider for .NET entry doesn't exist 
  

  *

  ODP for .net is required by EPMA dimension server, which you can find here-->

  http://www.Oracle.com/technetwork/database/Windows/downloads/utilsoft-087491.html

  Thank you
  hyperionEPM
  Please check the answers as useful or correct for others to find them easily

  Published by: hyperionEPM on May 14, 2013 20:17