Failed to create or save a playlist in WMP

Similar Questions

• Error: failed to create or save new files in the folder where it was downloaded during the upgrade from Windows Vista to Windows 7

  Original title:

  Attempt to upgrade Windows Vista to Windows 7

  I try to update my Windows Vista to Windows 7. I bought to download the rom update the Microsoft store and downloaded, but when I try to start the upgrade I have a stateing message that it is impossible to create or save new files in the folder where it was downloaded. I checked the security permissions in the file and made sure that no programs are 'read only', but it won't always go beyond this point!

  Hello
  
  What is the edition of Windows Vista installed on the computer?
  Make sure that you upgrade to the correct version, some versions of Windows cannot be upgraded with the installation disc you are trying to use. For example, you cannot upgrade a 32-bit version of Windows to a 64-bit version, or upgrade a higher edition of Windows like Windows Vista Ultimate Edition, to a lower edition, such as Windows 7 Edition Home Premium. If this is the case, you will need to use the custom during installation option.
  Before you attempt to upgrade, please run the Windows 7 upgrade Advisor:
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
  Also, check if your computer is compatible for Windows 7, using the Compatibility Center:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
  To learn more about the upgrade process, please visit the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  I hope that helps!

• Created and save the playlist not no projection in apple tv3

  I have apple tv3. In the youtube app, when I go to 'My Youtube', usually it will show all my saved Playlists and created reading lists. Now I see that the playlists created with only a few videos. saved Playlists are missing.

  Anyone know how we can solve this problem?

  Thank you

  MY problem is that all my playlists disappeared from youtube (atv3), before everything was fine

• Windows Media Player has encountered a problem creating or saving the playlist _

  can someoene help me I'll create a playlist I hit enter n it jumps upWindows Media Player encountered a problem while creating or save the playlist do - what I do?

  This probably means that your media library has been corrupted, so you have to reset it. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.

  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists. Tim Baets
  http://www.BM-productions.TK

• Why Windows Media Player won't allow me to save the playlist that I imported from iTunes?

  I have iTunes (10.5) and Windows Media Player (not sure which version). I have all my music in iTunes and WMP and I want to copy my playlists from iTunes to WMP. I exported the playlist from iTunes and saved as a M3U file. I open the M3U file in WMP and opening perfectly on the right side of WMP, but it wont let me SAVE the playlist in WMP. I tried to drag the iTunes playlist WMP playlist files and it wouldn't let me. Any suggestions?

  Hello

  (1) have there been recent changes to the computer before the show?

  (2) what exactly happens when you try to save the playlist?

  (3) you get any error message?

  (4) is the issue limited to the M3U file?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: If the problem persists then clear database of Windows Media Player. To do this, follow these steps:

  a. exit Windows Media Player.

  b. for Windows 7: click Start, run, %LOCALAPPDATA%\Microsoft\Media Player and then click on OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  Hope this information is useful.

• How to save the playlist in the music

  Original title: windows media player

  I ripped a cd and my computer it saved on my hard drive. So I "sent" to windows media player. Well he went to the dressing room and registered as a "playlist". I want to actually put in 'music' or 'artist' and I don't know how to finish the selection in the artist category. If you can help please do step by step instructions very simple because I am very new to all this.

  Thank you

  Naomi

  Hi Naomi,
   
  -What version of Media Player do you use?
   
  If you are using Media Player 11, save your playlist by following this step.
   
  To save the list, click on Save Playlist at the bottom of the pane list, and then type a name for the playlist.

  By default, playlists are saved with .wpl extension in the folder selections, which lies in the music folder. You can also save playlists with the .m3u or .asx extension.

  To do this, click on the button in the list at the top of the list pane, click on save the selection under and then change the extension in the Save as dialog box. Once you save the playlist, it's added to the playlists category in the library.

  To play the playlist in the list pane, click the Play button .

  To access the playlist in the future, in the Navigation pane, click the view of playlists, as shown in the following screenshot.

  

  For more information, see:

  Create and use your own customized reading lists

• How can I create a playlist without WMP?

  How can I create a playlist without WMP with files stored in my sansa Fuze please?

  You can make one in Notepad,

  It should contain the path to your music,

  So let's say your songs is at F:/music/artist/coolsong.mp3

  in Notepad, you must put the RELATIVE path, so if your file to playlist in the folder "music", you get artist\coolsong.mp3

  and if it is the root (main folder) of your drive, you would put music\artist\coolsong.mp3

  and all files must begin with: #EXTM3U

  Here is an example of a playlist (saved in the root

  #EXTM3U

  MUSIC\pillar\For the love of the Game\01 for the love of the Game.mp3

  MUSIC\pillar\For the love of the Game\02 turn up.mp3

  MUSIC\TobyMac\Momentum\Yours.MP3

  MUSIC\msc\Trogdor.MP3

  MUSIC\Msc\move.MP3

  I know it will work because it is my real playlist,

  during the recording of brand shure you end the name of the file as .m3u

  and change the type as 'save' to all files

• How to save a playlist as UTF-8 without BOM *.m3u8?

  How can you save a playlist as *.m3u8 UTF-8 without BOM (byte order mark)?

  A few songs on my playlist appears in the clip because they contain characters such as e, to, e

  I did a search on this forum and found the solution that saves the playlist as *.m3u8 UTF-8 without BOM (byte order mark), but I don't know how to do this.

  Can change me the extension (by adding the '8')?

  I use Mp3tag and it doesn't have the ability to save the playlist with the extension .mp3u8, and I can't find where I could check the options 'BOM' and 'UTF-8 '.

  Thank you very much.

  I managed to find the solution (see below).  For the benefit of third parties, I also do a summary of what should be done to use successfully. Playlists m3u with the Sansa Clip when you just drag and drop instead of use the feature of "synchronization" of iTunes or Windows Media Player:

  (Assuming that you use Mp3tag to create the playlist)

  1. in the Sansa Clip, go to settings/Usb mode, check 'MASTER '.

  2. I think that you will have to format the drive, then copy again your mp3 in the drive

  3-open Mp3tag

  4 - go to Options/Export

  5 create a new configuration of export and name it "M3U8 Playlist," relative paths

  6. then double-click it, then is paste the text below:

  $filename (m3u8, utf - 8) #EXTM3U
  $loop (% _counter) EXTINF: % # % _length_seconds, artist % - %title%
  % _filename_rel %
  $loopend)

  7. you can create this 2nd export the configuration if you want to, if ever a new firmware requires an absolute path (?).  The name: "M3U8 Playlist, absolute paths.

  $filename (m3u8, utf - 8) #EXTM3U
  $loop (% _counter) EXTINF: % # % _length_seconds, artist % - %title%
  _path %
  $loopend)

  8 - uncheck "write BOM".

  9. change the directory to where are your mp3

  10 select the mp3 of playlists

  11. Richt-click, choose "export...". »

  12 - select "M3U8 Playlist, relative pathnames"

  13. This will create a file with the extension "*.m3u8".  It's your playlist.

  14. place in the folder music to your Sansa Clip, NOT in the folder selections (like strange and illogical could seems).

• Cannot save the playlist in Windows Media Center

  I use Windows Media Center for the first time. Dell Inspiron Laptop with windows 7 Home Premium. I can just create a playlist. After the name of the list and select the files of the song and I select 'create', the following error message if poster, "Windows Media Center cannot save your playlist at the moment. Be sure to use only valid characters in the name of the playlist and try to save the playlist later. " I have made several other attempts using different names but the same thing resulted. Help, please. John

  Hi John,.

  Please take a look at this article on how to create a playlist in Windows Media Center:
  http://Windows.Microsoft.com/en-us/Windows-Vista/listen-to-music-in-Windows-Media-Center# (also applies to Windows 7)

• I can't register names and create playlist appear windows media player acountered a problem when creating or saving the playlist

  appear windows media player acountered a problem when creating or saving the playlist

  To the WMP library, please click on organize and select manage libraries - music . What places are? If there is no available location, remove them and also make sure that a default save location is set. Do the same for the other libraries (videos, pictures, and Recorded TV).

  If this does not help, close WMP, open Windows Explorer, right-click the music library, select Properties and click on restore by default . After that, make sure that a backup location is defined (as indicated by a check mark).

  Tim Baets
  http://www.BM-productions.TK

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• «FAILED: failed to create a snapshot of the source volumes VSS.» Error code: 2147754758 (0 x 80042306). "Down to 1% with autonomous converted 5.5

  Hi all

  I'm trying to convert a physical Windows 2008 R2 (SP1) virtual, using Vmware vCenter Converter Standalone version 5.5 build 1362012, it fails at 1% (after around 40mins) with the following message

  Failed: Failed to create a snapshot VSS of the source volumes. Error code:
  

  2147754758 (0 x 80042306).

  
  

  Windows systems has some LUN (4 x each various size GB) San, being the GUID (GPT) Partition Table.  I went through the wizard as a general rule, by selecting "edited on the machine", a player selected vmware "vmware workstation" or another vmware virtual machine destination 6.0.x and the location of the target being a LUN with 500 GB of space.

  Now for the data to be copied I selected 3 LUN (on a database resides) and put the 'Size' option (but I tried to keep the size of the various passes) to save space.

  
  

  Looking through the logs, I see the following errors

  Server-convert-VMware - 1.log

  2014 01-16 T 19: 42:37.371 - 07:00 [info 08696 'Default'] [serviceWin32, 416] Server vmware-converter service started

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 42:51.115 - 07:00 [info 08696 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 43:39.023 - 07:00 [info 10116 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:39.647 - 07:00 [info 07628 "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 44:26.152 - 07:00 [08696 error 'Ufa.HTTPService'] cannot read the request; flow: io_obj p:0x0141b84c, h:-1, < tube "\\.\pipe\vmware-converter-server-soap" >, < pipe "\\.\pipe\vmware-converter-server-soap" > >, error: class Vmacore::TimeoutException (operation timed out)

  2014 01-16 T 19: 47:32.

  Worker-converter-VMware - 1.log

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors when reading partition table

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [MoveActiveDiskIfNeeded] GetFirstBootDisk failed, error mntapi: 176

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [PopulateCapabilities] based on the Volume of cloning has been disabled due to: no volume is recognized >

  ..

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] Partition: ERROR: MBR sector must be present and valid initialize to GPT disk.

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 'Default'] signature of disk found 80a2884a-05e9-4c1b-81-3d-35-1b-a3-6c-4b-bc, drive to 225981112, sectors 512 sector size size

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 "Default"] Partition found type Efi system / single 4078aaff-430e-4825-bf-07-67-c6-ab-a1-87-3f

  ...

  2014 01-16 T 19: 47:37.365 - 07:00 [info 07596 "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:37.412 - 07:00 [10164 info "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 47:37.459 - 07:00 [info 07696 "Default"] MNTAPI: mounted volume \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.584 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.677 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.755 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.849 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.942 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.052 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.098 - 07:00 [10164 info "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:38.098 - 07:00 [info 03736 "ThreadPool"] Thread has enlisted

  I wonder if the converter is not able to work on the GPT partitions?  (I think I saw some discussion of the community on this problem using v.5.1, but using 5.5 should be resolved?)

  Any help is appreciated. Thank you

  Your problem is with VSS, it is probably the lack of space, to seek solutions and similar problems.

  Errors that you see are expected, we need a full newspaper bundle for investigation and don't warry on GPT disks, they are supported with converter 5 +.

• my itunes asked several cd's save a playlist of 55 minutes on a cd of capacity of 80 minutes.  It was working fine and it started a few days ago.

  MY ITunes started to ASK WHAT SEVERAL CD's save a PLAYLIST of 55 MINUTES ON ONE CD CAPACITY 80 MINIUTE.  IT WORKED VERY WELL AND STARTED TO DO THIS WITHOUT ANY CHANGE OF CONTROL.

  Sorry, but your question has nothing to do with Apple networks. You can have the best results to get a possible solution if you send your message to the communities to Support Apple (ASC) region of iTunes .

• I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

  Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

  Word

  https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

  PowerPoint

  https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

  There are usb drives that work with iPads, and you can save documents to those who use their own applications.

  http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

  Also I suggest you read through the iPad User Guide:

  http://help.Apple.com/iPad/9/