Failed to load audiobooks

Similar Questions

• I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile,"

  I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile. It may be missing or inaccessible"and Firefox does not open.

  I tried press windows key + R on my computer and open %appdata%\Mozilla\ - and rename the folder labeled "Firefox", but he said that "the action cannot be complete because the folder or the file that is open in another program" I didn't open it and try to restart the pc, but still no help

  A likely cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make the Creation/use of a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
  • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• JavaScript blocked or failed to load

  Hello
  Some time ago I suddenly realized that JavaScript was not working in my Firefox. I get a very explicit stack overflow error message:

  "Stack overflow requires external JavaScript from another domain, which is blocked or failed to load."

  Many other sites Web will not work.

  I am currently running Windows 7 and on typing 'java-version', I get the following result:

  Java version "1.7.0_40".
  Java (TM) SE Runtime Environment (build 1.7.0_40 - b43)
  Java for 64-bit Server VM (build 24, 0 - b56, mixed mode)

  I know that Java is installed and working as I can compile and run the NetBeans .java files.

  I'm in trouble I have spent hours to solve this problem, but he resolved No. I am very hopeful of a solution here.

  Thank you

  COR - el I experimented and installed Firefox 25 Beta 3 and JavaScript all work correctly.

• Sometimes Firefox fails to load my igoogle homepage. It takes usually over after 2-3 reboots. Annoying problem.

  Sometimes, when I boot up and load Firefox, it loads without my igoogle homepage. Occasionally, it will fail to load once I've used Firefox with the igoogle homepage. It's frustrating. Have to reboot several times to get the home page to reload. When the home page is not loaded, it keeps me to use the toolbar to load email and other google tools.

  I used Firefox for years and did not have as many problems with it. When I can not load my homepage on Firefox, I usually go to Chrome or IE and it works fine. This happened for several months.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  To turn on safe mode

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
  • Once you get the pop-up, simply select "" boot mode safe. "

  If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• All sites https fails to load with an invalid certificate

  I bought a new computer, I freshly installed 14 Firefox on Windows 7 (64-bit) and all https sites fails to load, with various failures of security certificate. Gmail, for example, does not charge for this reason:"accounts.google.com uses an invalid security certificate. The certificate is not reliable because no issuer channel was provided. »... Even after the addition of a manual control. My Bank Web site does not open because the serial number is used on another certificate... etc etc.

  I tried all the most commonly recommended solutions - cert8.db removal uninstall Firefox, creating new profiles, copy on the old PC profile, create a new profile under a new user... Nothing seems to have no effect. I tried Firefox 14 and 15 (beta), charges both installs. I tried to disable my antivirus and firewall (ESET).

  I'm out of ideas. Chrome and IE work without any problem. All other computers on the home network even behind the same router have Firefoxes that work very well.

  What security (firewall, antivirus) software do you have?

  Some security software intercepts them secure connections and sends its own certificate.

  Some examples are ESET and Bitdefender.

  • ESET setup-> Advanced Configuration-> expand web and email-> SSL shaft
  • SSL protocol: do not scan SSL protocol
  • BitDefender-> privacy-> settings disable SSL Scan

• I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

  I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

  OK I don't know what helped me exactly... but that's exactly what I've done so far.

  1 windows-key + r & open '% appdata%\Mozilla '.
  2 right click somewhere on the empty space in this folder, go to properties and make sure all protection read only for containinh the files and folders of
  3. Open firefox (version 13) has not been opened. Error as seen in the screenshot above.
  4 uninstall firefox.
  5. install firefox beta 14.6.
  6. Open firefox, works very well.

  I'm not sure if step 2 has helped as well as of the uninstall and reinstall.

  Thank you once more for the answer.

• Qosmio X 770-BSODS and Crash Dump driver failed to load

  Hello

  I have a Qosmio X 770 and his blue screening occasioanly but I can't find out why as the crash dump driver fails to load at startup.

  I gave google and tried to recreate the page, Delete file, it restart, rebuild again, affecting also devote dumpfile in the registry and still at every start I receive event ID 45

  The system could not sucessfully load the crash dump driver.

  I ran SFC and all files are very well

  Windows 7 64 bit, core operating system

  someone at - it ideas?

  Thank you

  Found a user who had the same problem with the dump file, and this could be solved by deleting the swap file, and then restore and after that seems to have solved the problem...

• Satellite A100 - 02 M fails to load Vista

  My Satellite A100 - 02 m fails to load Vista.
  Is there a repair partition on the hard drive?
  If yes how do for her?

  Jef

  I don't know what the problem is here, but if you're not able to load Vista using F8 and safe mode, then there must be a serious problem.
  I think the best solution for you is to install Vista using recovery media delivered.

• Satellite A500-15N "windows failed to load.

  I turned on my laptop today and started the usual startup process.
  Toshiba - logo (press F2, F12)
  -Green windows loading bar

  Then the laptop displays a black screen and nothing happens.
  When I turned off the laptop and turn it on again I get a message saying "windows failed to load" then it gives me options to run windows normally or run restore windows.
  Restorations of Windows does not work when I try to run it.

  This already happened to me, and I had to use my backup restore CD to restore the laptop to originial. I want to try to solve the problem for good, if possible, though.

  I don't want to have to restore the phone whenever that happens and risk losing data.

  The laptop works fine when it is plugged in at all times.
  Twice now, happened when the laptop has been disconnected from the mains and the battery is running out of power.

  Any help would be greatly appreciated.

  You can start Windows in safe mode?
  If yes try to roll back OS to an earlier time using System Restore tool.

  You have to understand that we don't know what are you doing with your laptop and what may be due to such behavior.

• Failed to load the battery satellite L750-

  I bought a L750_ _Satellite a year ago.

  Recently I had a problem where, sometimes, the charger will be plugged in but the battery continues to discharge (i.e. * fails to load *).

  It's something I've noticed that, * when this happens, both the power and the battery LED will be two startup flashes orange in sync.*

  When it occurs, the power icon still says (plugged up, load), but the percentage will continue to decrease over time.

  In order to fix temporarily, I can get out and re - insert the power cord and it will continue to support as usual, but thirty seconds later loading will fail again.

  What happens and how can I fix this problem?

  Hello

  Usually the battery indicator lights up white if the battery is fully charged.
  Orange indicates the battery is charging and orange blinking indicates a low battery level.

  DC-In (first from left) indicator flashes orange only if the output voltage of the adapter is abnormal or if the computer s his/her power.

  Then first of all, you should check if this happens using new, good test adapter.
  If it does not, check the battery.

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• Library not found or failed to load

  Hi all

  I am a first year student competely on LabView. Here's my problem:

  I got a file .vi of my co-workers, but I couldn't run.

  The problem is "this vi to own library is missing. According to the solution on the Internet, I selected the file and it disconnected from the library.

  Then the next problem. "Library could not be found or failed to load." And I have no idea how fix the problem now.

  Should I connect it to a library? Or should I do something else?

  My version is LabView2015, and I only got a .vi file and can't get in touch with the guy who worked on it.

  I thank very you much. And please let me know if something is necessary.

  Hello

  the library should be included in the project with the vi. If you have just a vi can create a project and include the library. It will be useful if you can join the vi here.

  concerning

  Spengler

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Windows fails to load, the loading screen bar after installed KB2479628 _

  Windows fails to load once installed KB2479628, my Dell BIOS boots then the loading loading bar continuously scrolls. After now the power button for 5 seconds and re-start the computer, Startup Repair tries to run and need to use system restore to properly initialize.

  I uninstalled the update and disabled for windows updates won't install the update on its own.

  • Never had a failure of the before update.
  • running a dell inspiron e1705
  • V8.0.6 IE / Win Vista SP2a

  Research on the update, it seems that KB2479628 is very important. Is there a reason that my system is not compatible with it?

  [1] [of Spybot's Tea Timer is] Enabled

  [2] I was running AVG previos version and previous version of Comodo until the current version of Comodo conflicted with AVG...

  A1. Please disable the Tea Timer of Spybot and leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  A2. Comodo Internet Security includes an antivirus application. You should NOT have more than one 1 installed anti-virus application & loading at startup. You tell me that you used to have Comodo Internet Security (antivirus, antispyware, firewall) AND AVG Free anti-virus installed at the same time?

  PS: Let us a favor & edit your first post above: replace KB2479268 KB2479628typos. Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to load SQL Server 2005 Express Edition Service Pack 3 (KB955706)

  Failed to load SQL Server 2005 Express Edition Service Pack 3 (KB955706)

  Maybe you'll find an answer here (or post a new thread with all the relevant information).

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 2005-2011 - Update Services