Library not found or failed to load

Similar Questions

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• 4.6 AIR 19 iOS Flex 9 ADT package fail: library not found for - ISystem.B

  Immediately after the upgrade to Xcode 7 and try to debug my Flex AIR project, it does not package for iOS. This occurs when you try to debug on the device (iPad 2 iOS 9). Attention of:

  
  

  ---------------------------------------

  Create iOS package

  ID: library not found for - ISystem.B

  ID: library not found for - Igcc_s.1

  Compilation failed during execution: Id64

  …

  ---------------------------------------

  The two Adobe Flex superimposed 4.6.0 with AIR 18.0.0.199 and Adobe Flex superimposed 4.6.0 with AIR 19.0.0.193 fail with the same error.

  In addition, debugging in the Simulator, we get another warning at startup:

  ---------------------------------------

  Launch of iOS app

  [MT] DVTAssertions: Warning in /Library/Caches/com.apple.xbs/Sources/DVTFrameworks/DVTFrameworks-8201/DVTFoundation/Plug InArchitecture/PlugInManager/DVTPlugInManager.m:257

  Details: Asked but can't find extension point with the identifier Xcode.DVTFoundation.DevicePlatformMapping

  Object:

  Method:-extensionPointWithIdentifier:

  Discussion: {number = 1, name = hand}

  Please fill a bug report at http://bugreport.Apple.com with this warning message, any useful information you can provide.

  ---------------------------------------

  
  

  The first defect is really the block. I can't usefully working on the project until this is addressed. No difficulty in suggestions welcomed, TIA.

  Please follow the following to workaround [Applicable only for MAC]

  1. download and install Xcode last version 7 (we tried on beta xcode7.2)

  2. create a symbolic link or copy of Xcode way ld: /Applications/Xcode-beta.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bi n/ld to /lib/aot/bin/ld64/ld64

  I hope it solves the problem.

• Library not found for - lstdc ++

  My application was running and building quite happily, but I wanted to use the IOS Simulator to take pictures of a few screen.  This used to work, now, since the upgrade to Yosemite, I get this error:

  Error occurred during the application of packaging:

  LD: library not found for - lstdc ++

  Compilation failed during execution: ld64

  How to fix? Anyone?

  Sue

  In fact he just had the path to the iPhone SDK Simulator stated incorrectly.  Fortunately, the laptop if it was right and was able to copy the path. Instead of stating: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs, it's just a Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs - all good now.

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• Property not found on flash.display.Loader charger and there is no default value

  Hi, I want to drag a single image of set of images loaded via xml, but it is showing an error.

  ReferenceError: Error #1069: property not found on flash.display.Loader charger and there is no default value.

  "hand / mouseDownHandler ()" thanks in advance...

  XML

  /////////////////////////////////////

  <? XML version = "1.0" encoding = "utf-8" standalone = "yes"? >

  < GALLERY >

  < IMAGE THUMB = "photo_tb/pic1.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic2.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic3.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic4.jpg" / > "

  < / GALLERY >

  /////////////////////////////////////////////

  package

  {

  import flash.display. *;

  import flash.events. *;

  flash.net import. *;

  import flash.display.Sprite;

  import flash.display.Loader;

  import flash.events.MouseEvent;

  main/public class extends MovieClip

  {

  private var levelXML:XML;

  private var myLoader:URLLoader;

  private var my_images:XMLList;

  private var my_total:Number;

  private var my_thumb_width:Number;

  private var container_mc:MovieClip;

  private var my_mc:MovieClip;

  public void main()

  {

  levelXML = new XML();

  var XML_URL:String = "data / data.xml."

  var myXMLURL:URLRequest = new URLRequest (XML_URL);

  myLoader = new URLLoader (myXMLURL);

  myLoader.addEventListener (Event.COMPLETE, lanceApp);

  }

  private void startApp(e:Event):void

  {

  var myXML:XML = new XML (e.target.data);

  my_images = myXML.IMAGE;

  my_total = my_images.length ();

  createContainer();

  callThumbs()

  for each {(var niveau: XML dans levelXML.level)}

  trace (Level.leveltitle);

  trace (Level.identifyme);

  //}

  }

  private function createContainer (): void

  {

  container_mc = new MovieClip();

  container_mc.x = 50;

  container_mc.y = 50;

  my_mc.x = 100

  my_mc.y = 100

  addChild (container_mc);

  }

  private function callThumbs (): void

  {

  trace (my_total)

  for (var i: Number = 0; i < my_total; i ++)

  {

  'loader_' + i

  my_thumb_width = 100

  var thumb_url = my_images[i].@THUMB;

  var thumb_loader = new Loader();

  thumb_loader. Load (new URLRequest (thumb_url));

  thumb_loader.contentLoaderInfo.addEventListener (Event.COMPLETE, thumbLoaded);

  thumb_loader. Name = i;

  thumb_loader.x = (my_thumb_width * I);

  }

  }

  private void thumbLoaded(e:Event):void

  {

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  my_thumb.contentLoaderInfo.removeEventListener (Event.COMPLETE, thumbLoaded);

  Sprite: var loader = Loader (e.target);

  var my_thumb:Loader = Loader (e.target);

  trace (my_thumb)

  my_thumb.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);

  my_thumb.addEventListener (MouseEvent.MOUSE_UP, mouseUpHandler);

  }

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  e.target.startDrag ();

  }

  private void mouseUpHandler(e:MouseEvent):void {}

  trace ("mouseUpHandler");

  var sprite: Sprite = Sprite (event.target);

  sprite.removeEventListener (MouseEvent.MOUSE_MOVE, OnMouseMoveHandler);

  sprite.stopDrag ();

  }

  private void mouseMoveHandler(event:MouseEvent):void {}

  trace ("mouseMoveHandler");

  event.updateAfterEvent ();

  }

  }

  }

  In your function mouseDownHandler target you 'e.target.loader', however, e.target is a Loader and Chargers have no property loader.

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  Try just "e.target" instead since this should be your code is looking for.

  var my_thumb:Loader = Loader (e.target);

  Although you might find you need to use "e.currentTarget" instead since e.target can point to the content of the loader instead of the charger itself

• Windows Vista has crashed, "the operating system not found" error, can I load Windows XP on a partition?

  I have an Acer Aspire 5516, with pre-installed Windows Vista. I didn't know that it did not come with a recovery disk UNTIL my system crashed! During a routine virus scan, I got a blue screen saying a major problem has been found and the system has been shut down. I followed the instructions to gracefully shut down my laptop. When I turned this back on after the "Acer" logo he went to a black screen with info on my computer and the last line States "not found operating system". That's when I discovered there was no recovery disc & it is integrated into the system. To access this system you we F8 to enter safe mode, then Alt F10 to access 'erecovery management system. Neither one of these functions operate! Still getting the black screen with "operating system" not found I have a Windows XP my laptop previous. What I was wondering is if I can load on my Acer, possibly on a partition, in order to be able to get into my laptop and save all of my files? I'm terrified of losing everything I have! I have thousands of pictures that I can't replace. If anyone can help please do! I am on a very limited income & can not really afford professional help. Thank you very much in advance!

  Hello

  normally with an Acer you press Alt + F10 at startup to start the hidden recovery partition recovery, not F8, then this combo

  but you do not have an option to save your data, that

  in daily use acers normally have a system partition, a partition of data to save your data, etc. to and also this hidden partition recovery

  and read this on data recovery, too;

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

  read this information about method 3:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

• Not found Windows 7 OS loader.

  I have my windows 7 Dell Inspiron.

  It does not start, so I tried a one-hour startup repair.

  I watched the Microsoft article, but I don't have a dvd to boot from.

  So now I have to try to get to the boot options by pressing f8, but that only led to the commissioning of repair, same results when I do it on the windows Boot Manager screen.

  Help.

  Hello

  Thanks for posting your query in Microsoft Community.

  From now on, I ask to see the suggestions in the article below.

  Windows 7 installation problem: hard drive not found

  Also, see similar analysis from the link to the thread: automatic startup repair fails. Cannot find OS Loader

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Server could not start. Failed to load /wcsdocs webapp.

  Hello
  
  I got this weird problem after having modernized the WebCenter 11.1.1.4 to 11.1.1.6 portal.
  
  After the upgrade, everything was fine. Spaces were running good until I tried to deploy a shared custom library on which the error is come:
  
  Failed to initialize the application "webcenter [Version = 11.1.1.4.0]" due to the error weblogic.application.ModuleException: cannot load the webapp: ' / wcsdocs'. ""
  
  That I tried to restart server, but the app webcenter went in prepared state and is not now.
  
  The stack trace is as follows:
  
  
  < BEA-149205 > < could not initialize the application ' webcenter [Version = 11.1.1.4.0] "due to the error weblogic.application.ModuleException: cannot load the webapp: ' / wcsdocs'."
  weblogic.application.ModuleException: cannot load the webapp: ' / wcsdocs'
  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)
  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:648)
  ... ...
  
  
  Caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' [ServletContext@202392075[app:webcenter module: / wcsdocs path: / wcsdocs spec-version: 2.5 version: 11.1.1.4.0] ", defined in weblogic.xml [Extension name: custom.webcenter.spaces, exact match: false]
  at weblogic.servlet.internal.WebAppServletContext.processWebAppLibraries(WebAppServletContext.java:2750)
  to weblogic.servlet.internal.WebAppServletContext. < init > (WebAppServletContext.java:416)
  ... ...
  
  Any help?

  Yes from the file system. The location is /archives/applications.

• recovery system option - not found any operating system, load drivers

  Hi, Im new here ^^ I am here to ask a question, he made me feel confused. I bought a laptop last year, which is (Acer Aspire 4930 G). Today morning when I turn on my laptop, it showed me all of a sudden

  PXE - 61 - test Media Failed
  No bootable devices - insert the boot CD and press a key

  I made impossible the network startup and test media is fixed. After that, I started using VISTA HOME PREMIUM recover CD and tried to fix my computer, but it seems to do the job.  These are the problems that I met

  1. once I click on "Repair my computer", it pop up a "system recovery option" forms but the operating system has not appeared and he asked me to load the drivers (not sure it takes load 1)

  2. If I continue without the operating system and I clicked on the "Startup Repair", it shows me that "cannot automatically repair withouth', is m felt confused.

  3. If I click on the "System Restore", it doesn't seem to work too.

  May I ask... How can I recover / find my operating system? and how can I solved the problem I've met? Is to make fuzzy m

  Recovey process Acer is normally a complete reinstall back to the factory settings: how you bought.

  http://support.Acer.com/

  For all questions/issues with Acer Recovery Media, contact Acer at the link above.

  It's Recovery process Acer, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• No library not found error when you try to download Stopzilla.

  I can't use Stopzilla, then they sent me an email with a link in it.  I clicked on the link and downloaded.  I clicked to open the download and it gave me an error found no library.  STOPzilla said to contact microsoft, because it is their product.  This is from the download and the link is msicuu2:

  http://download.stopzilla.com/Binaries/third_party/cuu2/msicuu2.exe

  Uh, the first thing I tried to verify as system requirements...  They don't seem to have everything on the web page.  You may contact suppot and this information, because it would be the first thing you would check for troubleshooting...

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I have intermittently (usually to the computer starts) receive the "Server not found" message, which usually loads the page when I try again

  This does not happen with IE for the same pages. He has just begun because I installed the v4 and now it happens with beta v5.

  Click on the Firefox button, go to Options | Options | Advanced and in the network tab, menu storage offline, click on the button "clean now".

• Satellite C855: webcam not found - initialization failed

  * Hello.
  I have a Toshiba Satellite C855 and I had a problem because I spent in windows 7 64 bit (I was on 32 bits), the problem is that I can't find the webcam.and when I run the "Toshiba Web Camera Application" application in the device driver it displays this message:

  + the failure of the initialization of the webcam. Check the operation of the camera, and then restart the application or restart the computer. +

  I don't know what to do I just try to update the driver on the official website of Toshiba, also uninstalation instalation and all... nothing worked.

  Please help me.
  and I thank you in advance.

  Post edited by: soubou

  Is the webcam or any device marked with visible yellow exclamation point in Device Manager?

  Otherwise, the webcam module is defective and must be replaced.

• error-5093 "the analysis library is not found" in the 64-bit project. But the analysis library is located in the 32-bit project

  Hello

  I use the system of Labwindows/CVI 2010 full development in a Windows 7 Professional 64-bit computer. Thus, the analysis library is installed (see the attached file) and the analysis of the options to customize menu library is selected.

  I use several function analysis library (WhiteNoise, MaxMin1D, LinFit, etc.). 32-bit projects work very well. 64-bit project there is not link error, the exe file is created, but there are errors like this:

  Function WhiteNoise: (return value is 5093 [0xffffffffffffec1b]). The analysis DLL library is not found or cannot be loaded.

  Ditto for the other functions of analysis library.

  How to use the analysis in 64-bit projects library, is the library of analysis 64 bit compatible?

  Thanks in advance

  Hi DansatB,

  Thank you for posting on this forum!

  Yes, the advanced analysis library is 64-bit capable. I can do the test on my computer the CVI 2013.

  I think it'll be great correctly uninstall your version CVI all ANS reinstall.

  Concerning

• Library of MobileDevice iTunes not found error when 'install the app on iOS connected... »

  After having recently updated iTunes to 11.0.5.5, I get the following error...

  "iTunes MobileDevice library not found. Please check your installation of iTunes"

  .. When you select 'Install the application on the iOS device' 'Post Publishing' section on the 'Deployment' tab in the "AIR for iOS parameters" dialog box

  This used to work? Any ideas?

  For now, I manually use iTunes to add the file to the device, but this slows down workflow considerably.

  Thank you

  Alan.

  installation version 12.1.3 iTunes could not solve the problem for me.  I needed version 12.1.2 to solve the problem:

  (1) uninstall Apple Application support 32 bit / 64 bit, Apple Mobile Device Support, updating the software Apple and iTunes

  2) go to C:\Program Files (x 86) \Common Files and delete the Apple folder

  3) go to C:\Program Files\Common Files and delete the Apple folder

  4) go on C:\Users\\music\iTunes and remove the .itl file

  (5) download and install the version 12.1.2 iTunes: iTunes download Apple 12.1.2 for 64-bit Windows.  Make sure that you uncheck the option to let iTunes update automatically.  Update kills the Flash Pro iOS usb communication (at least until adobe figures out the problem and releases an air sdk that solves the problem).

  (6) restart your computer

  (7) attach your phone to your computer via usb and unlock your phone if the "trust this computer" prompt appears you are ready to exploit the trust.

  (8) open Flash Pro > Debug > Debug Movie > on the device via USB > click Refresh device list if your iOS device does not already appear.

  (9) in the case of a failure, open file Explorer and make sure that your iOS device appears in the file Explorer.  If it is not the case, your connection usb-win has a problem.  Check your connections and the usb cable, make sure that you have enabled "trust this computer."