Failed to load the LAN driver wireless after update BIOS NB550D

Similar Questions

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Failed to load the JDBC driver when you run the update of the base

  I use dev studio to extract data in the pipeline to an Oracle database using an adapter record, on version 3.1.1 short. I get errors when running the update of the base:
  
  ERROR 22/03/13 17:13:37.273 UTC (1363972417273) {config} forge: (AdapterRunner): unable to load the JDBC driver: oracle.jdbc.OracleDriver. com.endeca.edf.adapter.plugins.JdbcAdapterException: cannot load JDBC driver: oracle.jdbc.OracleDriver.      at com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:256) at com.endeca.edf.adapter.plugins.JdbcAdapter.execute(JdbcAdapter.java:91) at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168) at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43) caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver to java.net.URLClassLoader$ 1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged (Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:303) at Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316) at java.lang.Class.forName0 (Native Method) at java.lang.Class.forName(Class.java:169) to com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:252)... 3 more
  ERROR 22/03/13 17:13:38.291 UTC (1363972418291) FORGE {config}: the java process evaluating the manipulative java class 'com.endeca.edf.adapter.plugins.JdbcAdapter' failed. Check the file ' / u01/oracle/VIS/apps/apps_st/comn/Oracle/endeca/Discover/./logs/forges/Forge/Edf.Pipeline.RecordPipeline.JavaManipulator.LoadOracleItems.log ' for more information.
  ERROR 22/03/13 17:13:44.840 UTC (1363972424840) {baseline} FORGE: Forge failed with 2 errors and 0 warnings.
  
  Pass on the adapter check crossings are defined as follows:
  
  DB_DRIVER_CLASS = oracle.jdbc.OracleDriver
  DB_URL = JDBC: thin: username / [email protected]:1521:VIS
  SQL = select * from XXFCI_ENDECA_ITEM_DATA
  
  I've set up the classpath as a variable that is defined in environment.properties as follows:
  forge.javaClasspath = ${ENDECA_PROJECT_DIR}/config/lib/java/ojdbc6.jar;${ENDECA_PROJECT_DIR}/config/lib/java/AdvJDBCColumnHandler.jar;${ENDECA_PROJECT_DIR}/config/lib/java/javaManipCommon-1.1.jar;${ENDECA_PROJECT_DIR}/config/lib/java/jakarta-oro-2.0.8.jar;D:/Endeca/CAS/3.1.1/lib/recordstore-forge-adapter/recordstore-forge-adapter-3.1.1.jar
  
  I'm passing forge.javaClasspath as an argument through the DataIngest.xml variable. The arguments that I am passing in DataIngest.xml are as follows:
  < args >
  < arg > - vw < / arg >
  < arg - > pruneAutoGen < / arg >
  < arg - > javaClasspath < / arg >
  < arg >$ {forge.javaClasspath} < / arg >
  < / args >
  
  
  I wonder if the versions of javaManipCommon - 1.1.jar and jakarta-oro - 2.0.8.jar are correct for version 3.1.1 of short. How will I know? What else can I do to fix this?
  
  Any help you can give would be appreciated!
  
  Thank you
  Becky Bradberry
  Senior Oracle consultant
  Promote the Concepts

  You run this under Linux or Windows? The path of the log file looks like Linux, but your classpath is configured to use windows (semicolons instead of colon) separators.

  Concerning

  Michael

• Failed to load the chipset driver. NLite or Floppy work.

  Hi people,

  I use a HP XW8400 (CPU Intel Xeon 5150 chipst 5000 X).

  I tried all means to get Windows XP PRO to detect my SATA HDD internal storage - and none of them have worked.

  Loading the drivers using the F6 floppy method key kept leading the message iaStor.sys is corrupted.

  As an alternative I used Nlite to integrate the drivers in a new Windows XP installation disc.

  I downloaded the drivers of chipset of the RST on the Intel site for my specific chipset (5000 X) in a new Windows XP installation disc, and although the operating system installs correctly it does not always detect the SATA internal HDD.

  Although my OS is 32-bit, I tried slipstreaming separate 32-bit and 64-bit Windows XP installation (in desperation) disc just in case where the 64-bit version worked and have had no success with either.

  I don't know what I can do?

  Please - does anyone have an answer?

  If you create a player files_and disk floppy external USB is used, ensure that it is plugged into the system
  before you begin step 1. The diskette is not inserted at the latest.

  1. Insert the CD of the operating system and Power On to start
  from the CD.

  2. from the beginning of the installation of operating system, the
  following message appears at the bottom of the screen:

  "Press F6 if you need to install a SCSI or RAID driver...". »

  When the prompt appears, press F6.

  3. later in the operating system installation, you are notified that
  a mass storage device could not be detected. When this notification
  happens, press S (S = specify additional device).

  4. When you are prompted, insert the floppy disk that was created from the SoftPaq
  file and then press ENTER.

  5. Select the appropriate driver and press ENTER.

  NOTE: At this point, the following message MAY appear, according to
  on the version of your operating system CD. If the prompt,
  Press S = use the driver on floppy disk and continue, if it is
  appears not to, go to step 6. The prompt reads as follows:

  Windows already has a driver that you can use to
  "Intel (r) XXXX".

  6. continue with the installation of an operating system, you are prompted.

• Failed to load the JDBC driver class

  Hello

  I managed to install Flash Builder 4 (FlashBuilder_4_LS10.exe) with the plugin (Adobe_Application_Modeling_plugin_v102_eclipse35.zip) data model. On my local pc (XP Professional), I'm under tomcat with LS (lcds31 - win.exe). I can run all the samples, but when I try to add an oracle DB data service I receive
  ' Not found data source: java: / comp/env/jdbc/ORCL.
  "Could not load the"oracle.jdbc.driver.OracleDriver JDBC driver class.

  I copied ojdbc6.jar (I tried ojdbc5.jar as well, but without success) in the C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\lib directory. I also uncommented RDS servlet in C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\web.xml and changed useAppserverSecurity to false. Finally, I added the following to C:\lcds\tomcat\conf\Catalina\localhost\lcds-samples.xml:

  < resource name = "jdbc/PUF" type = "javax.sql.DataSource"
  driverClassName = "oracle.jdbc.driver.OracleDriver"
  maxIdle = "2" maxWait = "5000".
  URL="JDBC:Oracle:thin:@oradbsrv:1521:ORCL" username = "atest" password = "aaa123" maxActive "4" =
  / >

  Any idea what I might be missing or hurt?

  Thank you
  Julius

  I have an Oracle data source running in LCDS31 of screens LCD liquid samples.  I have my Oracle driver in tomcat/lib not WEB-INF/lib.  I connect to an Oracle 10.2 server.  I am also under the odbc14.jar

  I would like to start by moving your tomcat/lib driver.  First try ojdbc5.jar.  I think I went to ojdbc14 because latest drivers did not work.

• CD/DVD players in two different tours of HP fail to read the Cd or DVD after update of race to the computer through Microsoft Update. How can I fix it?

  I tried Microsoft Fix - It and the PC-Doctor siftware that accompanies my laps. Is it not a little bit unlikely that they both quit at the same time? Please help if you can.

  Hi E.J.Berry,
   
  -Do you remember the number of the Knowledge Base (KB) of the update has been installed recently?
   
  View the history of facility to check the installed updates.
  To view the history of installation, follow these steps:

  a. click Start, point to all programsand then click Windows Update or Microsoft Update.

  b. on the Web site, click view update history.

  c. find the latest entry for the specific update.

  d. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  Run the troubleshooter from this link and check if it helps to fix the problem:

  Your CD or DVD drive cannot read or write media

• HARD drive click after update Bios on Satellite A100

  Hello.
  I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

  The bios update was published in 26/11/2007.
  Does anyone have the same problem?

  Thank you.

  I put t think it has something to do with the BIOS update.
  I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

  There are several times in my HARD disk created similar clique and sounds but it s runs great
  I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

  Best regards

• Tecra M5 suspended at the time of the switch mode sleep after update Bios 3.2

  I bought a new Tecra M5 - 104. February 6, 2007
  Toshiba Assist button or the presentation button worked. After trying everything I tried a Bios upgrade, found and installed 3.20

  Still buttons don't work and now Hibernate and standby does not work either.

  Hello

  I'm don't know if this will help, but try to reinstall the TOSHIBA common Modules.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Failed to load the local profile. IO error. All files in My Documents have disappeared. How to restore

  did a normal turn on the computer.  Message came back failed to load the local profile.  IO error.  When he signed me, all my documents in My Documents had disappeared.

  A corrupt profile is fairly easy to recover with minimal losses.  Refer to the following procedure:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Corrupt profiles are almost always accompanied by hard drive corruption.  After recovery, scan your hard disk for errors using chkdsk with the /f or/r option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.

  HTH,
  JW

• Satellite L550 - cannot load the sound driver in Win XP

  I bought a Satellite L550 with Vista preinstalled and you want to use XP.
  I loaded XP and have no audio device.

  I downloaded the Sound Driver TC40072000A.exe but when I run it, it extracts and then does nothing.
  I might have need of a few other drivers loaded first?

  Please help, thanks,

  John

  Hello

  The laptop needs a Realtek HD audio driver.
  You can download the driver directly from the page of the Realtek driver.

  But before you try to reinstall the sound driver, you must update the Win XP!
  All the service packs, SP2, and SP3 must be installed!
  It is very important since the SP3 contains fixes and patches needed.

  After installing SP3, you can follow with driver sound

  Welcome them

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Log: error message: "the service user profile service has no logon failed to load the user profile.

  Error message: "the service user profile service has no logon failed to load the user profile.

  Unable to connect.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner