Failed to open Camera Raw in Bridge

Similar Questions

• How to open Camera Raw in Bridge, it comes up with the following error

  How to open Camera Raw in Bridge, he comes up with the text following error application parent Bridge is not active bridge requires that a product of eligibility was launched at least once to activate this feature.  It opens in Photoshop CS6 & items 10, but not bridge?

  The uninstall program feature is in the OS under control panel.

  My mistake that the cab file should be in C:\Program Files\common filesFormats \Adobe\Plug-Ins\CS6\File it should be only a single file.

  Must also be a 32-bit program if use you it.

  The AppData/Roaming is where you will find all the particualars to bridge - keywords, cache, etc.

• Whenever I try to open Camera raw in bridge, it is said

  "Camera Raw edition requires a product calling it launched at least once to activate this feature.

  
  

  I'm on a windows 8 Acer laptop.

  Creative cloud bridge (64-bit)
  

  Hi abrahams,.

  • Please close bridge CC
  • Open Photoshop
  • Open a picture
  • Select the file > Browse in Bridge
  • Now close Photoshop and Bridge to restart to see if the problem is resolved.

  Concerning

  Assani

• Failed to open camera raw files

  I have already installed the trial version and installed updates to appropriate update include the update of the plugin 'camera raw', but when I start to open *.nef in camera RAW, it gives me the following message is displayed:

  Could not complete your request because the fie format module cannot parse the file.

  During this time... When I open the same file as a smart object , it opens normally

  Was this a clean install on the machine?

  You can use the application Cloud Creative to uninstall any previous version and ensure Manager no conflict is caused. I had a similar problem when I went to CC CC2014. Remove all applications using application manager provided Adobe and then redownloading and installation solved the issue.

• My bridge update 5.2.0.4 destroyed previews of all DNG files. They only appear on the side and small and I can't open Camera Raw in Bridge. Someone else has the same problem?

  I've updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5

  All previews (DNG files) to the bridge now appear on the side and only small miniature size.

  Also Camera Raw has been disabled.

  I tried cache purge for folders as all purge the cache.

  I also spent over an hour on the phone with technical support that being mainly involved switched between departments and try to understand someone on the phone.

  Can anyone help?

  I'm going to guess at the root of your problem is "also Camera Raw has been disabled."

  Can you check what version of Camera Raw, or not at all? Here is how to validate: keeping up to date of Photoshop

• Failed to open Camera RAW photos

  I took a few pictures with my Nikon D7100 in RAW format. Tried opening them in Photoshop. Poped indicating this error msg cannot open them because they are not supported. The D7100 is listed as supported. How can I open them?

  Have you used the Nikon software to download pictures from your camera.

  In the past there have been many problems with photos works do not once downloaded via the Nikon software.

  Just buy a card reader and insert your SD card into the reader to download.

  They work then?

  If this is not the case, there may be files damaged or bad sectors on your memory card.

  Google for photo recovery software as a last resort.

• Anyone know why, when I try to open an image with camera raw in Bridge, it is said: "the camera raw editing is not enabled.

  Hi guys,.

  Anyone know why, when I try to open an image with camera raw in Bridge, it is said: the camera raw editing is not enabled. Camera raw edition requires a product calling has been launched at least once this feature.  What should I do?

  Thanks in advance :)

  original title: problems of camera raw

  Try the Adobe forums

  http://www.bing.com/search?q=Camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&qs=n&form=QBRE&pq=camera+raw+editing+requires+that+a+qualifying+product+has+been+launched+at+least+once+site%3Aadobe.com&sc=0-0&sp=-1&sk=

• Bridge does not open camera raw

  I can't open files camera raw in bridge. I have a cc account. I did a test with an e-mail account other than the one I signed up with. Not sure if that affects anything but it says.something on initial demand of bridges is not active Bridge requires a product calling has been launched at least once. Photoshop is a product and I use it everyday so why am I having this problem on my new pc. Bridge works fine on my old pc obsolete.

  OK will try this tommrow is what cc looks when I've updated them both and

  It's under my active paid account

  Close both Photoshop and Bridge CC

  Launch creative cloud Application

  Sign out of creative cloud

  Reconnect and make sure that the Ps and the bridge are up-to-date

  ~ Assani

• Cannot open files in Camera Raw in Bridge CS6

  30/05/2014

  Believe that this problem happened after automatic update to Adobe (but not sure).

  Always transferred files from camera in the bridge, then make some changes by opening JPEG and RAW (NEF) files in Camera Raw in bridge.

  Now, "open in Camera Raw" is grayed out and I can't find a way to open files with Camera Raw inside Bridge CS6.  This seemed to happen suddenly and without new software or applications added to the computer.  All the other apps/software works well.

  Have you tried various bugs found on Adobe community discussions without success.  Now ongoing problem for more than a week +.

  Am able to open files in Photoshop without problem, but want to be able to make some quick changes using Camera Raw, open files from Bridge CS6.

  I use Bridge CS6 Version 5.0.2.4.  (as part of Adobe Creative Suite 6).  Update says I have the latest version of the bridge.

  I use an iMac with Intel Core i7 processor computer

  OS X 10.8.5

  Found others with this same or very similar problems on the forums but it either can't understand access plan/patches or impossibility of complete instructions on my computer.

  See for example: Camera RAW update the question with Bridge CS6

  Since this link/discussion, we find this "solution":

  Updated Camera Raw 8.4, Bridge CS6 Mac OS is not display the image metadata, or allow you to edit images in Camera Raw.

  Upward

  Manually install the camera Raw plugin 8.4.

  1. Exit Adobe Bridge.
  2. Download the file below.
  3. Find and double-click on the downloaded file to unzip it. The resulting file is camera Raw.plugin.
  4. Navigate to the folder Macintosh HD.
  5. Open the folder/Library/Application Support / Adobe / Plug - Ins / CS6 / File Formats.
     IMPORTANT: Navigate to the folder root of the library on your hard drive, not the library folder in your user folder.
  6. Copy the step 3 Camera Raw.plugin file Formats folder.
     IMPORTANT: This new file overwrites the file already in this folder. It is important that a single camera Raw.plugin file located in this folder.
  7. Open Adobe Bridge.
  Camera Raw.plugin.zip
  Mac OS Camera Raw plugin 8.4 for a manual installation

  
  

  However, when I try the above, I have these questions:

  1. when I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed, that States "could not complete your request because Photoshop does not recognize this file type."  (I think this may mean my computer is automatically unzipped the file, but I'm not sure about that).

  2 not quite sure I don't know how 'navigate to the folder Macintosh HD' suggested in step 4 above (OK, I'm new on Mac; since a long time PC user...)

  3. when I am in the 'Finder' and click on 'GO' while holding down the button 'Option', I find "library".  in this context, I find ' / Library/Application Support/Adobe ", but there is no 'Plugins' folder in the subfolder"Adobe ".

  4 don't know how if I'm in the 'library root' on my drive hard vs 'library under my user folder '.  (New, new Mac...)

  I have NOT yet tried to make a "Uninstall" and then re - install Adobe Creative Suite 6 together and I would like to avoid that if possible.

  Absolutely would LOVE it if Adobe would simply push an update that should fix this problem or if someone could explain to me how I could restore the previous version that worked perfectly for me.

  Any help, suggestions (in very basic, simple terms that any fool again in the world of Macintosh can understand) would be appreciated.  Very frustrated with Adobe at the moment.

  Especially like the switch to Mac, but with this and my picture to come to a sudden stop workflow, have doubts.  (But I guess that the update of Adobe for PC can cause problems as well).

  Thanks in advance for any help/suggestions.

  30/05/2014

  Literally minutes after I posted the above, I thought that this myself and now I'm a happy camper and things are back to normal!

  Here's my question/error: as a new Mac user, I was not negotiating/find files on my hard drive correctly.

  In case there are others out there with this same question (and I'm apparently dense):

  Here's what I did which resulted in a correction:

  First steps:

  1 exit/close bridge

  2. as stated in the post above, go to this link to download the Camera Raw Plugin file:

  Issue update to Camera RAW with Bridge CS6

  Link to download is towards the end of the instructions, but I try to insert this link for download here:

  Camera Raw.plugin.zip

  3. once the file has been downloaded, find her using "Finder" click "Finder" and look on the options list on the left side of the Finder window to find "downloads".  On my computer, clicking on "Finder" these options appear in the list on the left:

  All my files

  Air drop

  Applications

  Desktop

  Documents

  Downloads

  Movies

  Music

  Photos

  4. download you just made should be at or near the top of your download list should be designated as 'Camera Raw.plugin' and will be 83.5 MB size

  5. I clicked (two fingers on the touchpad) to bring up the drop-down options menu and choose 'Copy 'Caméra Raw.plugin' ' this list to copy the file.

  Now, you copied the plug that will correct this problem.  The second set of steps below will guide you through how to replace the file that is located on your hard drive with this record in the file you copied.

  Second series of measures (and this is where, as a new Mac user, I was confused at the beginning)

  1. even once, click 'Finder' on your Mac.

  2. the top of the screen, find 'GO' and click on it.  ("File, edit, view, GO, window, help", you should see "Finder" in the upper right corner of your screen, then click on the THUMB)

  3. in the drop-down menu that appears, click on 'computer '.

  

  4. then double-click on "Macintosh HD" to open your hard drive

  5. then double-click on the "Library" folder to open that.

  6. then, click on "Application Support" folder to open that.

  7. then, double-click the "Adobe" folder to open that.

  8. then, double-click on the "Plug-Ins" folder to open that

  9. now double click on "CS6" to open this folder.

  10. Finally, double-click on the "File Formats" folder that appears.

  11. NOW you should see this:

  

  12. click right (two finger press if you use a Tablet) to open the options window.  Select 'paste' by clicking on this option.

  

  13. you will be prompted with an option to keep existing file replace GOLD file.  Choose "Replace" according to the new "Caméra Raw.plugin" file in this folder.

  Finally, if you now go back and open Bridge CS6, you should be good to go.

  Hope this helps someone out there.

  I hope that future updates to Adobe will be better.

• Product qualification for initialization of Camera raw in Bridge CC?

  Can someone tell me what programs Adobe qualify for initialization of Camera raw in Bridge CC?

  I tried to install a (trail version) Photoshop elements which RTAs. This however to my surprise not allow me to start ACR of the bridge.

  (Of course I use ACR through the components, but this isn't what I want...)

  You must use regular Photoshop to open files in Bridge or organizer mentioned above, for Photoshop Elements. While both have Camera Raw, The Elements version has limited functionality.

• I lose the sharpness of camera raw in bridge. What's new?

  I lose sharpness when I go back to camera raw in bridge on my new IMac 5 K. My photos look great on this new Mac in raw (and photshop cs6 after I post process the images) but not when they are back at the bridge. What's new?

  Thank you

  Paul

  Homerun

  Don't know which of these 2 options but in ACR I checked these 2 boxes. "use software rendering' and 'generate previews of monitor size." One of them or both's done it. Now bridge of sharpness is back! Funny thing I never remember to change these settings - something I would not have done right.

  Anyway thanks for the help.

  Paul

• How can I activate camera raw in Bridge?

  Hello!

  Is the only way to activate Camera Raw, to buy Photoshop CC with a monthly plan or is it possible to gey comes from Camera Raw in bridge without any other software?

  Hi zeda82093530,

  You can not buy the bridge as a standalone application.

  The monthly package for Photoshop CC includes the bridge and who would be the best option to go look for Bridge and Camera Raw.

• I have Nikon D4s and I assumed new Adobe Photoshop CC open camera raw, but I was wrong, did I lose time and money to upgrade?

  I have Nikon D4s and I assumed new Adobe Photoshop CC open camera raw, but I was wrong, did I lose time and money to upgrade

  It opens images of D4. Check what version of camera raw you have. Camera raw 8 was installation on versions of 2015 for a reason, and, I think, you need at least 8.4. If you have 8.4 or above, did you use Nikon software to transfer the images? It has been known to corrupt the files of some cameras so PS can not open them.

• Opening multiple .dng through Camera raw in Bridge for use in Premiere Pro?

  I was going to the coast of this video ( CINEMA DNG & FIRST PRO CS6 - YouTube ) to try and shade of color all my .dng files and then take them in first pro to put it in my calendar. Whenever I try to select all files and open them in camera raw, it gives me the notification of "". "" I can open a single file in photoshop by double clicking it and color of that medium grade but obviously I cannot do for each file in the video, and it is yet to help me with the import.

  Even trying to open a file in camera raw gives me the notification. I tried Googling the problem but they are all adapted to open it in photoshop, I can do, just can't open multiple as seen in the video.

  I'm under Bridge, Photoshop, and Premiere Pro on CC.

  Thank you very much

  If you have a bunch of images, just use Bridge / Camera Raw to color correct your images and then select all in ACR and save in any file type that you want. Then you can import them into first. Warunicorn I prefer to use ACR for correction of images, original colors because it's pretty powerful, and then if they stayed a few tweaking the color grading in first or SpeedGrade use.

• Camera Raw open as smart object is not re-opening Camera Raw on double click!

  I can't get the Camera Raw dialog to reappear after I open an image as a smart object in Photoshop.

  Note that I'm opening Photoshop CS6, no bridge or Lightroom. I use Open as... (Shift-Ctrl-Alt-O), then select Camera Raw in the file Type drop-down list to open a standard PSD file. It happens in the Camera Raw dialog box. After that making edits (and savings as a preset) I SHIFT-click on the CR Open button to change to Open ACE Object.

  It happens in Photoshop with the changes. The thumbnail of the layer shows the small icon of the smart object to this topic. But when I double-click on top the dialogue came not from Camera Raw. Instead, Photoshop opens what appears to be a copy built of the original image with no editing. It carries the extension .psd, not the usual .psb extension. In addition, any changes to this document and save it has bizarre results on the original image.

  I swear to you that I managed to do work once earlier today, but now he does this again and I don't know what I'm doing wrong. I thought that maybe that's a small problem, but rebooting did not help.

  Thanks if you can understand this a ton!

  Since I realized this file to open a JPG or PNG (and probably a RAW) as Camera Raw works very well. In other words, I can edit in Camera Raw, and then shift-click to Open the Object and the smart object works fine in Photoshop. It's only when I try to open a PSD file type by using the file > open as... (File type: Camera Raw) I get the weird behavior when I opened CR mods as a smart object. Someone know why it works with a JPG or PNG format, but does not work with a PSD file?

  AFTER THAT I have the JPG or PNG opened as a smart object, I can then save it as a PSD and smart objects work fine.