Failed to update KB980408, KB975496 & KB981078 on Win 7 32 bit.

Similar Questions

• Satellite L750D - update in Win 7 32 bit for win 10 64 bit

  The installation was successful?

  Well win 10 came and I changed a few things in the start when the laptop computer just restarted.

  Windows 10 tried to solve the problem and said that it was impossible.
  I tried various recovery options that are offered by Windows 10, but all have failed to solve the problem.
  It seems to be a screen driver problem.

  The laptop was initially under Windows 7 32-bit before the upgrade, so so, the pilots would have been 32-bit.
  I have Windows summise 10 is now only 64-bit.

  See attached picture to screen before it fails.
  Screen splach windows at the start of the 4 blue pane window is correct, it's just, then the windows logon id screen supposed to show that you get the example attached.

  You perform an upgrade or a new installation?

  As much as I know it should not possible to upgrade Windows 7 32 bit to win 10 64 bit... you need the 64-bit version to get win 10 64-bit.

  In case you have made a 'upgrade', you could try to turn the clock back 10 Windows to an earlier version of Windows:
  Settings > update & security > recovery.

  If the options to go back and restore the factory settings are not available, you can use Setup Toshiba recovery media to install an earlier version of Windows

• Updates will not configure Win 7 64 bit

  Windows Update will download updates of Win 7 will not configure them. After the reboot it will configure at 15% and then I get an error message that says: "failed to configure updates. To eat.  Windows 7 64 bit

  I sent a support email, but they cannot understand it. How can I overcome this?

  OK, I thought about it. I installed all the updates of security and then installed all updates of system at a time and they have all installed.

  Thanks for all your suggestions.

  Jerry

• Failed installation update MUSE

  When I insert the Muse, he informs me "new update is available. I click on 'Install now' and I get the following error message:

  'Failed installation updated! Please check your network connection and try again. If this error persists, please let us know at http://www.adobe.com/go/forum_muse_uk"" "" "

  Try to disable any firewall or antivirus application and re - try to update, try a different network connection also. If this does not help, please uninstall it and use the following direct download links to install fresh Muse.

  Mac - http://www.adobe.com/go/muse_latest_win

  Win - http://www.adobe.com/go/muse_latest_mac

  Thank you

  Vinayak

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• Satellite R630 - problems of Driver on Win 7 64 bit after SP1 update

  That need your help here guys.

  My R - 630 Satellite is less than a year, under a Windows 7 Home Premium 64 - bit. For awhile, I've known BSOD, which I traced him through the observer of events here: http://technet.microsoft.com/en-us/library/dd337789 (WS.10) .aspx

  This has not led me far enough.
  Finally, I have found through other forums that the SP1 update would solve some of the annoying problems BSOD and I started the download and upgrade. However, when the computer reboots, while my laptop seems to have been healed (so far) of the BSOD, I have problems with drivers for:

  -Sound card
  -USB controllers
  -DVD player
  -Webcam
  -Bus enumerators

  I downloaded the indicated Win 7-64 bit drivers in each case. I tried to install the first. Nothing happened. I uninstalled the existing and installed new drivers. Nothing happened again.

  I thought I should do things in the right order.
  So I tried to install
  (1) the Chip Set Utility (drivers?) first, then
  (2) the USB drivers
  (3) sound card drivers etc.

  Nothing happens not always.

  I'm running out of ideas here.

  PS while other drivers run very well when I extracted the .zip format, the sound card driver, refused to run, even if the box "run command" has been checked when executing the .msi file.
  I've pulled into a folder and ran it manually.

  Still did not help.

  Hello

  What happens if you set the Windows operating system to the point before the SP1 has been installed?
  That you get the BSOD?

  I would recommend this doing.
  Use the Windows option that allows you to activate the operating system at the point of time at the beginning.
  Then, test the functionality of the OS.

  If everything works correctly, update the Win 7 64 bit with SP1.
  You must use the automatic update of Windows 7.

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• Satellite A505-S6025: Win 7 64 bit - driver ACPI\TOS1901 fails

  I have this problem and my phone freeze.
  If anyone knows what it is and how I can solve this problem.

  Thank you!!!

  failed to load the ACPI\TOS1901\2 device driver\driver\fwlnk & daba3ff & 2

  Hello

  Install the Package added on the value of the Toshiba for Win 7 64 bit and check if this will solve your problem.
  The driver of ACPI\TOS1901 seems to belong to the package of added value

  As I m not wrong not the Satellite A505-S6025 was released in the United States. Therefore, you should use the driver Toshiba page us to get the package.

• HP w2207 fails each update HP (monitor works perfectly)

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Purchased in 2008, the computer and the monitor purchased separately... Monitor has never had a successful update, works perfectly except Corel Win DVD 2010 will not play any DVD. message reads as follows: your display environment doesn't support protected content I thought that if I could update the drivers of HP my DVD would work. Maybe it's 2 problems, would be very grateful if someone could point me in the right direction... Thank you HP-Pavilion, GG056AAR - ABA a6157c System serial number: [text removed for privacy] Case type: Desktop Monitor: HP w2207 Windows Vista Home Premium Service Pack 2 (build 6002) Install language: English (United States) Local system: English (United States)
  Processor		Circuit main b
  2.00 gigahertz Intel Core 2 Duo cache of 64 kilobytes main memory secondary memory 2048 k-cached 64-bit ready Multi-core (2 total) Not hyper-thread		Map: ASUSTek Computer Inc. Leonite2 6.00 Serial number: MS1C76S00402276 The bus clock: 200 MHz BIOS: Phoenix Technologies, LTD 5.17 20/04/2007
  Readers		C and d memory modules
  320.07 capacity disk hard usable GB 226.52 gigabytes of free disk space HL-DT-ST DVDRRW GSA - H30L [scanner] Generic - Compact Flash USB Device [hard drive]--drive 1 Generic-MS/MS-Pro USB Device [hard drive] - disc 4 Generic-SD/MMC USB Device [hard drive] - 3 drive Generic - SM/xD-Picture USB Device [hard drive] - Player 2 SAMSUNG HD320KJ [hard drive] (320,07 GB) - disk 0, SMART location: healthy		Usable 3574 megabytes installed memory Slot 'A0' has 1024 MB Slot 'A1' has 1024 MB Slot 'A2' has 1024 MB Slot 'A3' has 1024 MB
  Controllers of		Display
  Channel [Controller] Intel (r) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF		Intel (r) 82945G Express Chipset Family [graphics card]
  HBAs		Multimedia
  Intel (r) 82801 GR/GH SATA RAID Controller Microsoft iSCSI initiator Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 9 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CA Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CB Intel (r) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC		Hauppauge WinTV HVR-1600 NTSC/ATSC Combo Realtek High Definition Audio

  The protected content message could be caused by a number of elements.  Your monitor must be connected with a DVI cable that is HDCP. Your video card must support HDCP, and finally the video card driver must support HDCP.  The PC may need to be required to manage the video stream protected content.

  I see that the motherboardof your PC has only VGA, so if that's how your monitor is connected, then this is probably the issue.  Install a discreet video with a DVI card and then use a DVI cable would probably solve the HDCP issue.

  Install a discrete video card could also mean that you need to supply. Unplug your computer and open it. Read the label on the power supply unit (PSU).  What is the total power and amperage on the bus + 12 volt?  The amount of amperage + 12 volts is important when choosing a video card.

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul

• important update KB947821, not proposed as important update, win 7 64-bit home premium

  Original title: important update, not proposed as important update, win 7 64-bit home premium

  I recently reinstalled win 7 64B Home premium, chose install important updates only, 25/01/2011... Since that time constant errors and critical errors appeared, and then this morning I missed connection then crash BSOD, error code, so I end up finding a lack important update called KB947821, why I asked does not have this facility as an important update as everything else on 01/25/2011? I only buy win7 in June

  Hello, MatchWhat

  Are you always problems with your computer or run the system update readiness tool solves the problem?

  KB947821 is the tool of the system update, this isn't an update, it rather is a tool that will scan and fix of inconsistencies that may prevent the updates install correctly.

  Since it is a tool, it is not available through Windows updates and you will be asked to download and run it manually if you encounter any problems.

  Also know that the excessive profanity on the forum Microsoft violates theCode of conduct . Please read the document and comply with its policies. We have changed your message, but be aware that you may be forbidden to publish in all instances of Microsoft if violation continues. Thank you for your cooperation.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update has not as well.

  This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)

  Hi William,.

  First try the following article: http://support.microsoft.com/kb/971058.

  If this does not work, try this link: http://support.microsoft.com/kb/923100.

  While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.

  I hope this helps.

  Good luck!

• Update for Windows 7 (KB2345886) fails to update _

  Update for Windows 7 (KB2345886) fails to update

  Download size: 421 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.

  KB2345886 is an OPTION, not the security update. Feel free to hide it.

• KB2345886 failed to update for windows 7 x 64 os

  really need help with this one.  Not computer savvy.

  KB2345886 failed to update for windows 7 x 64 os.

  Thank you

  sednfavor

  Send

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9>

• I get this KB2481109 update and it still fails to update it's a virus

  I get this KB2481109 update and it still fails to update it is a virus and how iI to get rid of this?

  Hi Judy,.

  1. do you get an error code?

  2. who is the antivirus installed on the computer program?

  Since this is a security update, there is a chance of infection from malicious software on the computer. We will analyze and identify the cause of the problem.

  Method 1:

  You can reset Windows Update components and check.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Reference:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2: Virus Scan

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

   
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Hope this information helps. Response with status so that we can help you.