Problem USB 2.0 on Satellite P200-1JR

Similar Questions

• Satellite P200-1JR doesn't do nothing - all the lights are off

  My toshiba Satellite P200-1jr someday is dead and it is like new.
  All the lights are off with battery or without or with only of food.

  Please help me. I don't know what to do.

  Thank you!

  Hello

  Don t think someone could help here in your case.
  No lights (power led, led battery nor ac DC plug-in led) means there could be a problem of serious material maybe the motherboard is missing.

  If the AC adapter is defective, then the laptop must always turn on using battery power ok, this is not possible if the battery would be too empty.

  So usually a technician first test adapter and should try to plug an AC adapter right in order to test this.

  But to me it looks like something wrong with a motherboard :(
  Of course, this is only my personal opinion...

• Satellite P200-1JR: display becomes suddenly empty only restart helps.

  Hello

  I have laptop Toshiba P200-1JR, and I am satisfied with the performance.

  Unfortunately, I have experienced a few problems for which I'm not sure if they are material (manufacturing) or a driver problem (software).

  1 display sometimes (maybe once a week) becomes suddenly empty. Nothing special was did not previously, which should be the trigger. Just the time. Only restart helps.
  2 same as 1, but already show just goes crazy for a few second. A few lines aside (as the magnetic interruptions) are on the screen.

  I just downloaded a bunch of driver updates (have not applied the yet), but I want to ask is this already known issue?

  Best regards
  Vladimir Stefanovic

  > The screen started flashing uncontrolled for about 15 seconds, then it becomes totally blank.

  If the display driver and BIOS update help didn t I would recommend checking the laptop in ASP in your country
  Something like this may seem very strange, or it s a hardware problem

  Good luck

• Re: Satellite P200-1JR-S/PDIF is stereo only

  Hello.
  I have the Toshiba P200-1JR.
  When I connect laptop to hollow receiver optical cable and trying to watch movies with AC3 5.1 sound, I get only a stereo sound.
  1. the receiver works correctly with the PS3 and DVD player.
  2. in S/PDIF options I have Setup with only 2 speakers.
  Screenshot: http://img177.imageshack.us/my.php?image=soundei1.jpg
  3. I have the latest audio driver from the Toshiba site.

  Please help me to get AC3 5.1 hollow optical cable.

  Thank you.

  Hello

  I don't know if you will be able to watch movies with 5.1 sound AC m.

  The fact is that this laptop supports the Audio Format: 24-bit (DAC, read), 16-bit (ADC, recording), stereo.

  In addition, it would be very interesting to know where you found the plug S/PDIF. ?:|

  To my knowledge, this laptop supports only mic and headphone jack.
  The headphone jack allows you to connect a _stereo_ headphones or other devices to audio output of the external speakers. I didn't find the S/PDIF connectors.

  I have connected my laptop to a stereo and in my case the HiFi, equipment produces the sound 5.1 and not the sound card on laptop!

• Install Windows 7 on Satellite P200-1JR (PSPB6E)

  Hello

  I have P200-1JR (PSPB6E), with pre-installed Windows Vista Home Premium.

  I would try (and buy) Windows 7, but I'm not sure of drivers available for this new platform.
  Has anyone tried to type of computer laptop install Windows 7 on this (or similar)? I have experiences.

  Thank you.

  Hello

  Windows 7 is not official launched and for the moment, you can install only trial version. Toshiba and other laptop manufacturers are going to start Windows 7 support when the first laptop with Windows 7 is available on the market. The same was with Vista.

  For now, Toshiba doesn't offer any driver, tool or utility for Windows 7.

• Problem of memory of my Satellite P200 1JY

  Hello world!

  I was offered a P200-1JY but one of the memory location is dead, and 1 GB is low for Windows 7.

  My question is: can I put a 4 GB memory module in only 1 location?

  Thanks for help me (and sorry for my English ^^)

  Hello

  I'm not sure if you can use 4 GB in a home, but I'm sure you can use 2 GB into a slot and have 100% working notebook.
  Compatible 2 GB of RAM for your laptop is PA3513U-1M2G.

  I use Satellite P200D with 2 GB and it works well. I also tested with Win7 and it's really OK.

• Ports USB Hi-Speed on Satellite P200-140

  I use a P200-140 and it was announced as having USB 2.0 ports, but whenever I have something to connect to USB ports, the message appears: this device can perform faster if plug you it into a USB Port of speed Hi. This laptop is supposed to have 4 hi speed usb ports, then why can I not connect to them?

  This message appears usually when you connect a high-speed USB device into a port that high speed isn t.
  If you do not want to see this message every time you plug in your device, here is how get rid you of it.

  1. open Device Manager click with the right button on my computer, and select Properties.
  2 from there you click on the Hardware tab, click the Device Manager button.
  3. Expand Universal Serial Bus controllers icon.
  4. Select the properties of any USB universal host controller.
  5. Select the Advanced tab.
  6. check the box which says: "Don't tell me about USB errors."

  However, this message should not appear as the laptop supports the USB 2.0 interface. It s high speed!
  I assume that it is a bug in the windows operating system. Many people in the internet have reported this and it seems that the new installation of Windows from scratch might help.

• problem with the drive map satellite p200-1ba (pspb6e) on windows 7

  Hello! I have recently upgraded to windows 7 and my card reader does not work. I have a laptop p200-1ba (pspb6e) satellite. I installed intel chipset utility, robson package and everything seems fine in Device Manager, but nothing happens when I insert my card in the card reader. Anyone any ideas? Thank you.

  Hello

  > No support of flashcards for windows 7-32 in the downloads section

  Have you tried Vista? Most Vista drivers are compatible with 7

• Problem with camera integrated on Satellite P200-1BK

  Hello

  If all those who have this same problem and a solution would help me, it would be much appreciated.
  I had the laptop for 8 months and have not really used the web cam until recently. The problem is now, it was working fine until I was in the middle of a video call and the camera screen turned all green.

  Where there are distortions in the picture lines and green covering the picture.
  I have tried reinstalling the drivers for the webcam but have not been effective.
  If someone could help me it would be much appreciated.

  You use the Vista operating system?
  If Yes please check if all Vista updates are installed. I mean especially the Vista SP1.

  I see that you have updated the software of webcam, but please do this again after Vista update.
  Please don t forget to clean the operating system once the old webcam software has been removed using a software program such as CCLeaner.

  I put t know what program did you use to video conferencing, but it would be also a good idea to check if there are some updates because this issue could also be linked to this program too.

• Reinstall the operating system on Satellite P200-1JR

  Hello!
  Please help me, I need our help.
  How to reinstall the system pre-installed on my laptop safely?

  My OS: Vista Home Premium (32 bit)
  3 GB RAM

  Thanks in advance

  You can do this via recovery DVD or disk HARD recovery facility.
  How it works with the installation of HARD drive recovery, you can read about
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Please note: this will work if your laptop has only factory settings. If this isn't the case, you must use the recovery DVDs. You have these recovery DVDs?

• Audio problems with Satellite P200-1BA

  ... Hi, first, my English is bad... :D

  I have a problem - I bought the Toshiba Satellite P200-1BA
  After I bought the laptop, I reinstalled the operating system (recovery DVD 1 time)-j' have audio, but I m missing the settings for the subwoofer + virtual surround sound + equalizer! ...
  Now I m help legal windows Vista Ultimate Edition, installed all the drivers + utility for my laptop, the Toshiba site, but I can't yet find the settings...

  Do I need an additional program for the improvement of the sound, or I need only the audio driver?
  Once more, I can't speak English, but I hope, someone of you can understand me and can help me - thanks in advance!... ;-)

  Do I have to use my subwoofer bass, virtual sound + Equalizer again?

  As far as I know Toshiba doesn't offer a special software for that. All available parameters, you can find in the Realtek HD Audio Manager in the control panel.
  Each player has own EQ options and when you listen to music with a few players check this option in the drive itself.

  That's all.

• Webcam on Satellite P200 is dimmed

  My webcam usb chicony on my Satellite P200 is blurry, so I see no image...
  What should I do? I need help please its 1.3 M

  : D had the same problem but not with P200, but with the U of Satellite series.
  My internal webcam was unclear, but after a few seconds, I noticed the little plastic in front of the webcam :)

  I removed it and the image appeared.

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.

• Satellite P200 - BIOS did not recognize my usb 3.5 drive "

  Hello
  I have a few years ago:
  Satellite P200-1FY
  Reference: PSPB6E-0QR035FR

  I just bought a new hard drive WD20EARS (2 TB) 64 MB of RAM,
  and I connected on an external box<-> SATA USB3 (closed hot 'cc'), so plugin on my toshiba via USB (USB2.0 card)

  I partitioned the drive with 2 parts (1 part FAT32 (enabled): 930KB and 1 NTFS 1, 89 GB)

  * My problem is :*
  I am not able to detect the drive by the bios (bios updated with 2.7 "bios - 20110124131826.zip"), in order, starting with partition FAT32)

  tests I've already done :*
  (1) connect this drive (WD20EARS) on a PC: HP 6530--> result b: drive is detected by the bios, it is impossible to boot the disk
  and the operating system is started correctly

  (2) plug in sametime a usb2 startup key and the disc--> result: WD20EARS disc is displayed on the selection of the bios (sometimes)
  but it is impossible to start on it. When I select the drive, the USB is booting

  Could you help me find the problem (bios, disk or box usb3) or have you updated to solve

  Kind regards

  Stand by.
  BIOS cannot detect the external HARD drive? You want to start OS saved on the external HARD drive? Is this correct?

  Tests 1 and 2 are related to this HP laptop?

• Satellite P200 - 17 c: USB ports do not work after BIOS update

  Hello

  Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

  Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

  I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

  Any info or advice would be great.

  See you soon.

  Glad you ve found a solution and thank you for sharing this with us