Failover problem SRM production running on both sites...

I recently started an implementation of SRM. We have two data centers with production virtual machines running on two sites. We use Recoverpoint for replication.

Last week, I put a vm of single test on a single data store itself and ran a test failover to the other site. I've got 5 data stores in the protected site running of the production virtual machine and about 15 stores of data in the site of "recovery" as well the production of the virtual computer running. I had a single VM running on a data store in the protected site of test and did a test failover on the site of "recovery."

SRM/Recoverpoint eventually taking snapshots ALL my production, on the site of recovery (15 stores data) data warehouses which in turn confused the ESX servers and brought a lot of production VM running around this site down.

Datstores in the recovering site showed duplicate... data store name as snapshot... of the data store name

My understanding is THAT SRM should ONLY be slamming the data store that you no longer, is that correct?

Not sure if the problem is with the SRA Recoverpoint in that it makes a change to LUNS or parameters of SRM which have been applied to the LVM on the hosts.

I have a case open with VMware support and they say resignaturing is a global change and that's the way it works. Many things I've read that you can have prod virtual machines running on two sites. They say it's normal behavior.

Anyone can shed some light on this?

Please send me the newspaper.

not wanting to take the path of your support call open I'll tell you what I saw.

basically in your journal whenever you run test failover the recoverpoint THAT SRA is never working against a replica key unique lun. According to your descriptions above is correct because the recovery plan contains you only a single protection group and a single lun object.

It means so I can only assume that at some point your SITE1VMFS volumes * that become suddenly resigned were running at some point LUNS that come from your table to site2 (clariion?) and were then separated (for data migration?) so that you now VM to Site1, those LUNS was then themselves (in the case of SITE1VMFS1 and SITE1VMFS2) re-re-replicated to Site2.

However if after that replication first divide those LUNS was not manually resigned then if at any time later (for example, when you install SRM) something else happens and allows Site1 resignaturing on your hosts (like SRM) then these original LUN of 'split' with their old Site2 SCSI_DiskId will always be detected as snapshot LUNS per ESX since the vmkernel will see a subdomain of the 78 SCSI_DiskId byte is incompatible.

Not sure if this is part of the origin of these LUNS Site1 at all, but what's in the newspapers, this theory is the only one that makes sense to me at the moment.

hope that helps,

Lee

Tags: VMware

Similar Questions

  • I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.

    I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.

    You have more than one Adobe ID and password - for creative cloud and the other for your trial period?

    Nancy O.

  • I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

    I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

    I am running SPSS 23.0

    You can upgrade to 23.0?

    Also, have you looked here

    http://www-933.IBM.com/support/fixcentral/SWG/selectFixes?parent=SPSS & Product = IB m / + Information Management / SPSS + statistical...

  • Equium L100 - problems of product recovery

    Hello

    Im having serious problems trying to run a recovery of product on my laptop Equium L100.

    I restarted the laptop using the recovery disk of the supplied product as described in the user manual and after the re-installation of the drivers of the laptop turns off automatically. I presume it was part of the recovery procedure, and so turned the laptop, to find that, after the Welcome screen, the monitor shows a black screen, hence there is no progress.

    I don't know what I can do from this point. I assumed that all the data to the origin of the laptop was dropped, but the laptop does not restart properly and stays on the black screen. Any help that anyone can provide me to complete the process of reformatting would be much appreciated.

    Thank you very much

    James

    Hello James

    There's not a trick to get it working again. Either it works or not.
    Please try to make the installation of recovery once more. Before that, set the BIOS to default settings and launch the installation of recovery.

    When the installation is complete, remove the optical drive installation disc and restart your laptop to see if the same thing will happen again.

  • problem with nfs run

    I have computer laptop hp 2000-2110, but when I run nfs running on it, the game runs slow what to do

    Hi saurabh0007,

    Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I saw your post about the problem with NFS running: run. Unless you have changed the processor and added little RAM your system isn't the minimum system requirements for the game. The game needs 4 GB of RAM and you only have 2 GB, and the processor should be 3.0 Ghz but yours has only 2.4 GHz, I have included links below for specifications of your laptop and the NFS: Run required.

    HP 2000-2110tu product specifications

    Need for Speed: minimum required Run

    Thank you

  • How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

    Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.http://communities.vmware.com/images/emoticons/sad.gif

    Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

    Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

    Thank you!

    Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

    -

  • receiving the message "an add we don't have to run for this site.

    For some reason any annoying, very annoying message keeps popping up at the bottom of my screen, when sites with adobe flash (I installed it).
    "An add we don't have to run for this site.

    Win7 ie9

    I hope someone knows how to turn off this option?
    Thank you

    Hello - I noticed that flash on http://edition.cnn.com/2011/10/12/opinion/arab-world-changes/index.html announcement for example works well. but the announcement on http://www.ynetnews.com/articles/0, 7340, L-4135131, 00.html triggers the problem.
    the same problem happens in some other Web sites with flash. Maybe that's a problem with the advertising areas that are blocked by my system? I see that the announcement on YNet is provided by http://ad.doubleclick.net . What is the source of the problem? Thank you

  • Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

    Hello!
    The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
    Sincerely, Vsevolod.

    This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    See also:

  • Problem with youtube and other video sites

    I have a problem with youtube and other video sites:

    Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
    

    I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

    GRTS,
    agrash

    I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

  • Problem when I run an application

    Hi, I have a problem when I run an app in the Simulator. When the application is sync for the Simulator the following error appears:

    "Synchronization, and start the application has encountered a problem.

    result::Failure 500 'ascii' codec can't decode byte 0xc3 in position 104: ordinal not in range (128)

    I use OS X 10.9, Momentics 2.0 and system of the Simulator version is 10.2.1791.

    Thank you.

    Please check that you deploy a file binary (x 86) Simulator and not a binary system (arms).

  • We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

    We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

    You can't do that. If you have a license for Windows, you can not use it on a Mac.

    In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

  • PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = NEW WINDOW (RES) PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

    Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64

    Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3

    Fisico processore Conteggio: 6 Velocità processore: 3214 MHz

    PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW

    PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

    Hi biagiob,

    Seems that the operating system is obsolete.

    Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements

    Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)

    Kind regards

    Claes

  • I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

    I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

    425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.

  • "This connection is Untrusted" appears when you try to access all sites on MacBook Pro; problem started after running Avast scan of the computer

    I ran the full scan of the disc of Avast. Since then, I have been unable to access any site using Firefox without getting the message, "this connection is not approved." Many are the sites I have been too many times before, and they are trusted sites. I don't know if there is a problem with Firefox or Firefox could recover place a sort of new "infestation". The Avast scan resulted in 5 put files in a quarantine area. Eleven years could not be scanned. Thanks for any help you can provide!

    I guess Safari normally works on these sites?

    The latest version of avast! Web Shield includes a function to filter your Internet connections for potential threats. In order to filter secure sites, it must present a certificate of 'false' for the site in Firefox, so it can be 'in the middle' and read your secure communications. If Firefox is not set false certificates of trust, then you will get warnings for all secure sites.

    You can disable this feature as a test to see if the problem goes away.

    If this works, but you want to use the feature, you must import the certificate of Avast in the tab "References" of Firefox so Firefox accepts its false certificates (there might be an automated way AVAST to do this for you, or you might need export from IE and then import them into Firefox).

    Here is an exchange of views on avast! "forum of s on the way in which this is supposed to work: problems and questions about HTTPS scanning - Avast Internet 2015

  • All of a sudden I can't log into the site Web of Netflix with Firefox 14.01. I have no problem with Safari or Chrome (both are up to date).

    The only other recent change has been updated Adobe Flash yesterday. Everything is updated. I can use other browsers to get in my Netflix queue, but I prefer not. This has just begun. It's annoying, but I'm planning to upgrade my iMac to Mountain Lion and would like to have as many things working properly as possible. I'll let Netflix know also that the problem can be at their end.
    Thanks for any help you can give me.

    Try to empty the cache and delete cookies from this site. Also, make sure that you allow the site of dΘfinir of cookies.

Maybe you are looking for

  • Firefox opens slowly

    Unlike your information, Firefox 14.0 (Build 20120605113340) opens only one tab (of several tabs recorded the last time). It opens all tabs at the same time, and when there is a couple of tabs saved, there are usually several minutes for Ffox open. A

  • Toshiba NB220-12W - problem with HARD drive - need to install the OS

    My apologies if this is posted in the wrong section. I have a 12W NB22, which I believe is more made. I tried to install Windows 10 that seemed to download without any problem. However after turn off and turn on again, I was faced with a black screen

  • HP Mini 110-3100 XF036EA #ABU: HPsupportassistant

    Hello After the update to Windows 10 HP Support Assistant does not work. I checked the various positions and tried repeatedly UN-installing and re - install all or none avail. After reading another post, I tried to install the HPSupportSolutionsFrame

  • I'm locked (stuck) in Mode safe and cannot find a way out.

    After trying to throw a disc of Verizon FIOS games I started having problems with my PC. I went to check what I could find to start in Mode safe mode with network and now I can not start any other way and I'm limited by the mode of sade in what I can

  • my windows xp computer could not recognize my ATI video card

    I am a representative of Microsoft online. I write on behalf of the client. I manually lowered hardware acceleration for my video card. I have the right ATI video card on my desk but I can't get the system to recognize it. Can you help me. Microsoft