Failover process dell equal logic ps6210 boxes

Similar Questions

• Update Firmware in Dell Equal Logic PS4100E

  Hello! I have a Bay Dell equal logic PS 4100E. I need to update its firmware. Currently Im running Firmware V5.1.1. I read this: "Update Firmware for Dell EqualLogic PS Series arrays and FS Series storage facilities" but I need confirmation before doing the actual upgrade.

  Since Im running V5.1.1 now, I need to:

  (1) download and install the firmware V5.2.11

  (2) download and install the firmware V6.0.8

  (3) download and install the firmware V7.0.2

  Am I wrong? Could someone confirm that its okay? Soon ;)

  To get to v7.x v5.1.1 you only need to do two updates, first upgrade to 6.0.x (the most recent, 6.0.8).  The document upgrade firmware for v6.0.8 clearly shows that you can go to 6.0.x 5.1.x and no need to do the 5.2.11 upgrade).

  Once on the last version 6.0.8 (and the table has been restarted - very important to do this step!), you can go to the latest version of 7.x.

  (Note that the release notes for 7.x is a bit of confusion on this and need to be revised to show the path of 5.1 to 7 a little better)

  -joe

• «Login process failed create the dialog box options security.»

  On a Vista desktop, startup takes up to 2 hours to display the desktop icons. After that the icons appear Finally, none will run. The error message before full boot, I get up, it's "" logon process failed create the dialog box options security. " I tried a clean boot, boot without failure, even booting with a boot disk and try to do a restore. All I get is "no restoration is available on this computer." Once he finally starts, I can run regedit, but not the Task Manager or any other executable. Finally had to reformat and reload, but would like an answer for this strange behavior.

  Hello

  You could deal with the issue because of some third-party security patches on the computer. Most of the time, it will be a virus on the connection process attack. She would not allow the user profile of all loading as well as the security settings of the created user profile.

  Reference:

  10 ways to fix your PC

  http://Windows.Microsoft.com/en-us/Windows/explore/10-ways-to-tune-up-your-PC

• Manual failover with several Standby logical

  Hello
  
  I failed to run with two standby failover logic. The transition to the
  at the first news is successful, but when I try to sinchronize the second logical standby I
  get this error in the alert.log and the trace:
  
  SERVICE NAME:(SYS$USERS) 2011-02-21 02:05:32.644
  SESSION ID: (138.8) 2011-02-21 02:05:32.644
  The main database identifier does not match the database
  identifier associated with the standby redo log of the
  logical standby database.
  ORA-16086: standby database contains no logs available pending
  
  The scenario is llike this:
  
  Server role
  primary Leopard
  Tiger to sleep 1
  Lion to sleep 2
  
  The passage of leopard to Tiger works well. But new primary sinchronization, tiger, with
  second sleep mode, lion, breaks with the error ORA-16068.
  
  Is this possible?
  
  Thanks in advance!

  You did not provide a version number, or enough information to find out how you have configured a part any configuration.

  If the first line into two logical Standby it replicates standby who then reply standby B or both all too?

  If the primary went what mechanism is in place, the new principal to replicate to B? Expect to also replicate logic from the previous day, return to the primary origin?

  We need a lot more information to help you.

• How I can even check on all the Sports in the process at the color chart box

  Hello everyone,

  How can I even check box on color chart (F8) > ink Manager > > all Sports in the process, with script. Please help me someone.

  Thanks in advance.

  
  Kind regards

  Siva

  Hey!

  Jongware say it BIG "thank you". It's his script

  app.activeDocument.colors.everyItem().properties = {space:ColorSpace.CMYK, model:ColorModel.PROCESS};
  

  Hope that helps!

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Problem running the RS 5 with Dell EqualLogic PS6100XV

  Hi all

  I have one set up a green field SRM environment, with the below configurations for an active active environment disaster.

  Protected site

  Material

  1 Dell Poweredge R810 x 3 No.

  2 Dell Equal Logic PS6100 XV (7.2 to)

  Infrastructure of Virtual Machines

  1 SqlServer 2008

  2 vCenter Server

  3 SRM Server

  4. HITVE device

  Protected virtual MACHINE

  5 computer virtual size 200 GB test

  Recovery site

  Material

  1 Dell Poweredge R810 x 3 No.

  2 Dell Equal Logic PS6100 XV (7.2 to)

  Infrastructure of Virtual Machines

  1 SqlServer 2008

  2 vCenter Server

  3 SRM Server

  4. HITVE device

  Protected virtual MACHINE

  5 computer virtual size 200 GB test

  I have configured the RAID 10 storage because it will be a critical environment in the future. I have everything works very well for vSphere and end Site Recovery Manager, for the underside of the storage configurations.

  Total space available after RAID 10 is 2.61 TB and I set about 1 volume to with 1.5 to for replica on both sites, 500 GB for the infrastructure servers which I am not reproduce (all expect thin provisioned protected virtual machine)

  The problem with my setup is whenever I have perform a recovery of Fail-Over and then Reprotect for restoration, I need to increase the reserve of replica to the minimum that is mentioned in accordance with the image attached. Given that during the test phase I just 5 VM 40 GB each and available space is 1 TB, I wanted to know why he wants me to increase every time the reserve line although I mentioned like 200% and if I'm not wrong whenever he tries to take a full scanning replica I don't want to happen and it should take just the changes of the base replica.

  It would be great, if someone corrects me if I understand replication in a bad way

  Hello Chandan,

  I'm just trying to get a few pieces more information to get a clear picture.

  When you set up replication first what you set up for the amount of reserve of replica at the site in "prod" (protected from SRM)?  I wonder if this is set to 0, trying to replicate back maybe it's why it asks you to set aside space for the moment 'DR to prod' replication.

  To take advantage of any default return changes make sure that 'keep instant failover' is checked in the configuration of the replica.

  Thank you!

  -Va

• Show progress dialog box and continue a process in the background.

  Hi all

  I need ro register a user on my server, causing Web service calls and some lenthy process.

  During this process of recording in the background, I want to show the user a dialog of progress with just a Cancel button.

  Once my process is complete, the dialog box needs to disapper.

  Is this possible?

  I looked in the dialog system progress, but it seems he needs user interaction., an OK button.

  I want just a Cancel button and my registration process going on in the background.

  Help, please!

  You can use a https://developer.blackberry.com/native/reference/cascades/bb__cascades__progressindicator.html and a standard button.
  Or a SystemProgressDialog where you use only the button cancel.

• confirmation box between different processes

  Hello world
  
  Here's the scenario:
  
  I have two processes on the page:
  1-insert/update of the data.
  2. to send the e-mail.
  
  The reqirement is to have the process to run on the same click of button and 'send email' process should be based on the question of whether or not the user selects Yes.
  
  Based on other threads on the forum, I know how to add a confirmation box if there is that a single process, but who have a time difficult, how can it make using multiple processes and add them confirmation box.
  
  Please advise me.
  
  Thank you
  Wojtek
  
  Published by: Wojtek on October 12, 2010 14:35

  Create the javascript function, for example

    function sumbit_page(){
       if(confirm('Do you want to send e-mail after...')){
         doSubmit('SEND_MAIL');
       }else{
         doSumbit('JUST_SUMBIT');
       }
    }
  

  and call on click of a button.

  Then change your processes to be conditional:
  (1) insert/update data if: ASK ("SEND_MAIL', 'JUST_SUBMIT')
  (2) e-mail: REQUEST = 'SEND_MAIL '.

  __________________________
  Don't forget to mark the appropriate fix/useful messages

• FAILURE - Security Options. Login process failed create the security options dialog.

  I'm running Windows Vista Business Edition 32 bit on a Dell XPS M1330 desktop; 4 GB OF RAM. 120GB HD. I use McAfee Security Center.

  Sometimes, the system hangs with the following symptoms :

  • I'm starting to receive messages "not responding" in an application or a program that I opened, for example when using Firefox or windows explore.
  • The system starts to slow down and works with breaks and stills.
  • Gradually, the system does not meet the clicks or keyboard, but I can move the pointer. I am also unable to bring up the Task Manager (no response to C-A-D)
  • Eventually the screen goes black with the exception of pointer, which moves with the mouse
  • After a few minutes, you receive the following message:

  Title bar: login process failed create the dialog box options security.
  Message text (with X-red): failure - Security Options

  • The only button available is the OK button. When I click on the button, Windows is displayed again, but it is completely insensitive (move the pointer). Wait long enough and repeat the sequence preceding.
  • The only thing I can do is stop hard by dint of power off. When I have the power back and reboot, everything seems back to normal, until the next time.

  I have tried the following options:

  • restarted the system and you press F8. So I tried to run the system restore. But in doing so, I got a different error message:

  Title bar: the disk OS (C :) has errors. )
  Text of the message: Windows has detected corruption on OS (C :) file system. You should check the drive for errors.
  Action line: check the disk for errors

  • I clicked on the above action line and the disk check has started, but after about 20 minutes, it got stuck at one point and didn't move forward despite me waiting for 3 hours.
  • Tired of waiting I finally canceled everything.
  • So I decided to restore my laptop to factory settings. After restoring the system to the factory settings that I was hoping it would work very well, but he worked the same and error message "failure-security option" is new.
  • Now the system not yet properly starts in safe mode.

  I would be grateful if someone from microsoft can help me with this problem that I need my laptop for urgent and important work.

  1. start windows in safe mode, press start and type "msconfig" in the search/run box. go to the services tab, find the 'superfetch' service and uncheck the box next to it. Click OK and restart normally (if you have exactly the same problem, I had - that should fix it).

  2. check in the clean boot state: http://support.microsoft.com/kb/929135

• I have a white empty box in the upper left corner of my screen. How can I get rid of him?

  It's a white box in the upper left corner on my main screen (Center). There is nothing in it, and it covers a section of 6 icons on Desktop 3 across and 2 down.  It occurs during the boot process and I was not able to attach it to a specific program.   I was informed by Dell it is a Windows 7 problem.

  I had a computer technician who had encountered the problem before.  I have a Dell and this white box was some kind of problem with the backup of Dell and the restoration.  I just stopped the program of commissioning and the white box does not return.

• Problem with VPN L2L and RA in a failover configuration

  I use two ASA 5540 in failover active-standby configuration. These boxes (primary and secondary) are used to establish some L2L and VPN RA (remote access). The active area run the OSPF process.

  The problem is when the failover (blocking just to the bottom of the active area, or "active failover" running in a secondary zone) all L2L be restored in a secondary zone. The only way I can do this (re-connect) removes the configuration of IPP (Reverse injectable way) (for example. ("no card crypto rprbbe_map 3 don't set reverse-road") and the configuration of IPP ("card crypto rprbbe_map 3 Road opposite the value"). After this the connection is re-established.

  In RA guests the session persists on a failover event, but the customer loses access. To resolve this problem, the customer needs to disconnect and reconnect.

  Anyone has any experience with this kind of (L2L and RA) VPN configuration using failover?

  Behavior seems buggy.

  What version do you use?

• Reference Dell GX620 Purple screen with ESX 4.1

  Hello

  I had a Dell GX620 of Otiplex box with 4 GB of Ram and 2 hard drive ESX 4.1 and all of a sudden I start to experience crashes (purple form), sometimes 3 seconds after the start of the process and others, when the system already in place, but I connect to one of the virtual machines.

  He is always coming up with some 'console/6096 PCPU0"among other error lines.

  Everyone got an old similar system and is having a similar problem? Maybe someone knows how to fix this?

  Thank you very much

  Download the memtest disc and test the RAM. http://memtest.org/#downiso Let run overnight or longer.

• How to create the failure of another process of running processes.

  Hello
  
  I want to create an instance of another process of my running processes. At the same time, I want to move a business object as a parameter to this instance. Please help me to do this!

  This and other ways to create an instance in a another process has been described in Re: creating the new process instance

  1 this is how you create an instance in a process using the logic in the activity of the automatic method. This example uses the "Fuego.Lib.ProcessInstance.create ()" method below within a process:

  // "argsIn" is an associative string array (Any[String])
  argsIn as Any[String]
  // this assumes that the Begin activity has two argument variables
  //   named "nameArg" (a string) and "myBpmObjectArg" (a BPM
  //   object variable) and you're setting them
  //   to the previously initialized variables "name" and
  //   "myBpmObject" respectively
  argsIn["nameArg"] = name
  argsIn["myBpmObjectArg"] = myBpmObject
  
  // logic here to determine the name of the process to create an instance in
  idOfProcess as String
  idOfProcess = 
  ProcessInstance.create(processId : "/" + idOfProcess, arguments : argsIn,
       argumentsSetName : "BeginIn") 
  

  ProcessInstance is in the catalog inside Fuego.Lib.

  The processId parameter (the variable "idOfProcess" in the logic above) is the thing that I most often live with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  // this will *NOT* work
  argsIn[nameArg] = name
  argsIn[myBpmObjectArg] = myBpmObject
  . . .
  

  Here is the correct syntax:

  . . .
  // this *WILL* work
  argsIn["nameArg"] = name
  argsIn["myBpmObjectArg"] = myBpmObject
  . . .
  

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way. In this example, there is an incoming string argument, called "nameArg" and an argument entering BPM object called "myBpmObjectArg".

  2. a process can create a new instance in another process by using the activity subflow, which creates an instance in a child synchronously sub-process and expects the result to return once the instance in the child sub-process reached the end of the process activity. The parent process, you would correspond to the variables of the arguments incoming and outgoing of the child called process with instance variables in your parent process.

  3. a process can create a new instance in another process using the process creation activity that creates an instance of an asynchronous child subprocess (fire and forget), but does not expect the child to respond to the parent company. Once the child is initiated, the mother continues its flow. The parent process, you would correspond to the variables of the incoming arguments of the called child process with instance variables in your parent process.

  Dan

• create the new process instance

  Hello
  
  How can we create a new instance of processes other than in global activity. Is there a way on this?

  Hi Anuraq,

  Know I'm leaving on a couple, but there are several ways you can create a new instance of the work item in a process:

  (1) this is how you create an instance in a process using the logic in the activity of the automatic method. This example uses the "Fuego.Lib.ProcessInstance.create ()" method below within a process:

  // "args" is an associative string array (Any[String])
  argsIn as Any[String]
  // this assumes that the Begin activity has two argument variables
  //   named "nameArg" and "amountArg" and you're setting them
  //   to the variables "name" and "amount" respectively
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  
  // logic here to determine the name of the process to create an instance in
  idOfProcess as String
  idOfProcess = 
  ProcessInstance.create(processId : "/" + idOfProcess, arguments : argsIn, argumentsSetName : "BeginIn") 
  

  ProcessInstance is in the catalog inside Fuego.Lib.

  The processId parameter (the variable "idOfProcess" in the logic above) is the thing that I most often live with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  // this will *NOT* work
  argsIn[someArgVarName] = "Hello"
  argsIn[someBpmObject] = myBpmObject
  . . .
  

  Here is the correct syntax:

  . . .
  // this *WILL* work
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  . . .
  

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way. In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

  (2) the overall activity of creation - creates automatically an instance based on human interaction - requires no other logic to set the argument variables you want to spent in the process mapped to instance variables. If it is decided in the screenflow associated with this activity that you do not want to create an instance after all, he just needs to hit an automated task to screenflow creations worldwide that has logic 'action = CANCEL'

  (3) Interactive global activity - also based on human interaction, it can create an instance when you get inside screenflow Interactive global activity to an automated task that has the logic of Instance.create () above.

  (4) using the Fuego.Papi.Instance.create method using the logic inside a process.

  (5) using the Java PAPI:

  fuego.papi.Arguments arguments = Arguments.create();
  arguments.putArgument("inArgument", "MyArgument");
  String consolidatedProcessId = "/SomeProcessNameId";
  String argumentSetName = "BeginIn";
  fuego.papi.InstanceInfo instance = session.createProcessInstance(consolidatedProcessId,argumentSetName,arguments);
  

  (6) with the API of PAPI-WS (Web Service), you can create an instance in a process using a web service call.

  (7) a process can create a new instance in another process by using the activity subflow, which creates an instance in a child synchronously sub-process and expects the result to return once the instance in the child sub-process reached the end of the process activity. The parent process, you would correspond to the variables of the arguments incoming and outgoing of the child called process with instance variables in your parent process.

  (8) a process can create a new instance in another process using the process creation activity that creates an instance of an asynchronous child subprocess (fire and forget), but does not expect the child to respond to the parent company. Once the child is initiated, the mother continues its flow. The parent process, you would correspond to the variables of the incoming arguments of the called child process with instance variables in your parent process.

  Dan

• Invoke the process of implementation of the method of automatic activity

  Hello
  
  I want to call a business process of the automatic activity of another process craft deployed on the same engine and same project as well. Please provide steps, if possible for the same thing.
  Thanks in advance.

  Hello Ketan,

  Here's how you can create an instance in a process using the logic in the activity of the automatic method. This example uses the "Fuego.Lib.ProcessInstance.create ()" method below within a process:

  // "args" is an associative string array (Any[String])
  argsIn as Any[String]
  // this assumes that the Begin activity has two argument variables
  //   named "nameArg" and "amountArg" and you're setting them
  //   to the variables "name" and "amount" respectively
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  
  // logic here to determine the name of the process to create an instance in
  idOfProcess as String
  idOfProcess = 
  ProcessInstance.create(processId : "/" + idOfProcess, arguments : argsIn, argumentsSetName : "BeginIn") 
  

  ProcessInstance is in the catalog inside Fuego.Lib.

  The processId parameter (the variable "idOfProcess" in the logic above) is the thing that I most often live with that. This is the text that you see when you process in the project right-click browser tab-> "Properties". Look at the value in the field 'Id' and not the field 'Name' (the name without a space). Prefix with "/" as presented here and if you have deployed this using a unit of Organization (UO) then prefix this chain also.

  The third parameter is almost always "BeginIn". Start of activities in a process can have several incoming argument mappings, the default value is "BeginIn". See your, double-click the process Begin activity and seek on behalf of mapping in the upper left corner of the dialog box.

  "argsIn" is the set of variables of incoming arguments you want to spent in the process. A common error is to type the names of the variables argument entering without the double quotes, as follows:

  . . .
  // this will *NOT* work
  argsIn[someArgVarName] = "Hello"
  argsIn[someBpmObject] = myBpmObject
  . . .
  

  Here is the correct syntax:

  . . .
  // this *WILL* work
  argsIn["someArgVarName"] = "Hello"
  argsIn["someBpmObject"] = myBpmObject
  . . .
  

  In this example, the process has two argument variables. It doesn't matter if the incoming arguments are arguments of primitive type (e.g. String, Integer, Decimal...) or objects of BPM, it is always in the same way. In this example, there is an incoming string argument, called "someArgVarName" and an argument entering BPM object called "someBpmObject".

  Hope this helps,
  Dan