Fails to remote connections

Similar Questions

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ViewPlanner fails when the "Connect-Start-workload.

  Hello

  I am working on installing a reference ViewPlanner, ViewPlanner 3.5 environment local.

  I created the Office of the GoldenRDSH and the Viewplanner device, without AD.

  I used Windows 7 32 bit under my desk and Office installed (2010..) and all the necessary applications and tools.

  Managed to do the check option, and there is no problems/errors.

  However, when I do the execution phase, it fails on the "Connect-Start-workload.

  Attached, the screenshots of the desktop and web appliance GUI.

  

  The journal of Viewplanner.txt of the device:

  15/06/17 09: 12:30, 160 INFO Matching VM control & Mgmt-Perf with prefix: GoldenRDSH

  2015-06-17 09:12:30, 160 INFO Matching VM GoldenRDSH with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 INFO VM GoldenRDSH matched with prefix: GoldenRDSH

  2015-06-17 09:12:30, 161 VMs Office INFO found: ["GoldenRDSH"]

  2015 06-17 09:12:30, INFO 161 loading AD Info to data structures is done with adinfo: [{'schedlist': zero, the 'Protocol': 0 L, "name": "ssss", "wrk_FK": "QuickWordTest_1i", "poolname": ", 'grp_id': 11 L,"extrainfo": zero, 'percentage': 100 L, 'connections_per_client': 1 L, 'deskvms': ['GoldenRDSH'], 'rdshtype': 0 L, 'workprofile': {'IEbpm': 1 L, 'ARbpm': 1 L, 'Thinktime': 5 L,"extrainfo": zero, 'name':"QuickWordTest_1i"}}] [{{, 'hosttime': 1, 'random': 1, 'iterations': 1 L, 'OMP': 60 L, 'video':-1 L, "applist": "WORD"}, "clientprefix": "}]

  2015-06-17 09:12:30, 164 DEBUG get the configuration option monitor_control.pseudo_perfctr in VM GoldenRDSH

  2015-06-17 09:12:30, 184 INFO the value of the performance counter for VM GoldenRDSH: true

  2015-06-17 09:12:30, 184 INFO updated 1 desktop VMs

  2015-06-17 09:12:30, INFO 184 turn on VMs in the Scott/ad group: ["GoldenRDSH"]

  2015-06-17 09:12:30, 185 DEBUG turn on/off the VM: GoldenRDSH

  2015-06-17 09:12:30, 188 DEBUG VM GoldenRDSH is powered. Restart the virtual machine.

  2015-06-17 09:12:31, 250 INFO Operation: poweron_desktops, start time: Wednesday 17 June at 09:12:30 2015, Total time taken: 4.31

  2015-06-17 09:12:31, 251 INFO-

  2015 06-17 09:12:31, INFO 251 waiting for the number of virtual machines for you register

  2015-06-17 09:12:31, 251 INFO-

  2015-06-17 09:12:34, 860 DEBUG returning to the current state: 0 with status message: [IP recorded: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors)]

  2015-06-17 09:12:50, 327 new customer INFO entry: 10.11.19.165

  2015-06-17 09:12:50, 328 registered current INFO status machines: [required servers: 1] [server: 0]

  2015 06-17 09:15:50, 328 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:15:50, 328 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:15:50, 340 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:15:50, 341 INFO makes the analysis of the virtual machines.

  2015 06-17 09:18:50, 342 INFO analysis all virtual machines for all required patches.

  2015-06-17 09:18:50, 342 INFO makes the analysis of the virtual machines.

  2015 06-17 09:21:50, 426 DEBUG, there could be problems with the following virtual machines in this run (check vCenter Console to search for errors). Continue the race with other virtual machines.

  2015-06-17 09:21:50, 427 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

  2015-06-17 09:21:50, 443 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

  2015-06-17 09:21:50, 443 DEBUG IP: 10.11.19.165-> name: GoldenRDSH

  2015-06-17 09:21:50, 444 INFO Running query: SELECT * from hostinfo where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 445 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State is 'Unpaired', name = 'GoldenRDSH' where IPADDR = "10.11.19.165."

  2015-06-17 09:21:50, 452 INFO registration remaining VMs.

  2015-06-17 09:21:50, 452 INFO reached threshold number of machines. From the reference plane.

  2015-06-17 09:21:50, 452 INFO waiting for virtual machines to settle; sleep for the rise time.

  2015-06-17 09:22:20, 490 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('1', '10.11.19.165', '10.11.19.165', 'NA', 'ssss_1', "passw0rd", "waiting", "2015-06-17 09:22:20", 0)

  2015-06-17 09:22:20, 495 INFO Running query: SELECT * from testinfo where testname = '1' and test_state = 'pending' and ClientIP_FK = '10.11.19.165' and ServerIP_FK = username and "10.11.19.165" = "ssss_1."

  2015-06-17 09:22:20, 505 DEBUG begins to gather its periodic vCenter stats...

  2015-06-17 09:22:26, 220 INFO-

  2015-06-17 09:22:26, 221 INFO launch the execution plan for the run profile

  2015-06-17 09:22:26, 222 INFO-

  2015-06-17 09:22:26, 222 INFO from the local workload for virtual desktops.

  2015-06-17 09:22:26, 223 INFO Unmapping default data on the 10.11.19.165 virtual machine folders

  2015-06-17 09:22:26, 223 INFO Running query: SELECT * from testinfo where ServerIP_FK = '10.11.19.165' and test_state = 'waiting '.

  2015 06-17 09:22:26, 225 INFO the id of the test server is 4

  2015-06-17 09:22:26, 225 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.11.19.165."

  2015-06-17 09:22:26, 235 INFO Running query: UPDATE testinfo test_name = "1" SET, Protocol is "NA" of user name = "ssss_1" password = "passw0rd", test_state = "Running", start_time = '2015-06-17 09:22:20 "where test_id = 4

  2015-06-17 09:22:26, 236 INFO Pushing workload from the virtual machine configuration: 10.11.19.165

  2015-06-17 09:22:26, 237 INFO running commands remotely with arguments: server: 10.11.19.165, test_name: 1

  2015-06-17 09:22:26, 237 callback function to add INFORMATION for the remote root object for IP address: 10.11.19.165

  2015-06-17 09:22:27, 085 adding INFO reminder for the command startWorkload on the 10.11.19.165 Server

  2015-06-17 09:22:27, 115 WARNING remote call failed: [failure instance: traceback to remote host - Traceback unavailable]

  ]

  Error unhandled offline:

  Unhandled error

  The remote host - unavailable Traceback traceback

  2015-06-17 09:22:30, 119 configuration workload of INFORMATION sent to group: ssss

  You will appreciate your help.

  Thank you

  Guy

  It seems that the ViewPlanner agent is installed incorrectly.

  There are two packs zip for Agent of VP (1) for desktop PC (2) to the client.

  It seems that this client package is installed in the office instead of an office. You can install the agent desktop of VP and try again?

• HP Pavilion TS Sleekbook 14: Notification for kidnapping HP Remote Connect keeps appearing.

  I recently updated to W10 anniversary and, during the process, a message that HP Remote Connect had been removed. (As I never used it, it did not concern me unduly).

  However, every time I turn on my computer, I get a notification that she was kidnapped.

  Is it possible to disable this notification, as it is beginging to annoy me?

  Michael Cahill

  @M_Cahill

  Welcome to the Community Forum of HP.

  M_Cahill wrote:
  

  I recently updated to W10 anniversary and, during the process, a message that HP Remote Connect had been removed. (As I never used it, it did not concern me unduly).

  However, every time I turn on my computer, I get a notification that she was kidnapped.

  Is it possible to disable this notification, as it is beginging to annoy me?

  Michael Cahill

  I do not recognize this service / connection / program / process.

  I am a number (a lot of) references to something called "HP connected remotely" - maybe it's the program / service to which you are referring.

  I can offer the following ideas:

  Easy:

  If you have not already done so, just try to shut down the computer completely > wait 15 seconds (or as long as you can stand it) > to start the computer from a stop condition, and log

  

  Locate the deviant service:

  Control Panel > display icon > Administrative Tools > System Configuration >

  Services tab > CHECK temporarily hide all Microsoft services >

  check the list for the offending program > uncheck if found >

  Clear the check BOX Hide all Microsoft services > OK

  

  If the notification after the connection, check / adjust:

  Windows key > settings > applications and features > search for the offending program and uninstall

  Windows key > settings > Notifications > Scan quick action icons > > if you find the offending program > Add or remove quick actions > drag the indicator to OFF for this program

  Windows key > settings > Notifications >

  Drag OFF Get notifications for apps and other shippers

  Slide OFF receive advice, tips and suggestions that you use Windows

  

  Reset the network

  Although extreme, the following might help if the parameter is somehow stuck in your network.

  Read / understand the warning on action requiring a reinstall of VPN / virtual switches.

  Thus, if you use static IP address settings, these too, may need to put in place.

  Windows key > settings > network > Network Reset

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• Unable to remote connect to another computer on the network home

  Greetings,

  I have a Windows 7 desktop computer and a laptop Windows Vista Edition full.  I am able to connect using the program of remote connection to the laptop from the desktop, but not the laptop on the desk.  I get
  an error that says "Remote Desktop disconnected' and inside the box, he says" this computer can't remote not connect "and communicate with the administrator, me.

  I turn off the Norton firewall on the desktop and no luck.  I typed the IP address and the name of the desktop computer.  Both get the same answer.  I ping the desktop from the laptop.

  Any suggestions?

  Hello
   
  1. which is the edition of Windows 7 is installed on the desktop?
   
  We recommend that you first of all to you allows to cross check if remote desktop connection settings are correct on the Windows 7 computer. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. in the left pane, click Remote settings.
  3. in the System Properties window, click use remotely.
  4. make sure that the following settings are applied.
  a. allow for Assistance connections to this computer remotely.
  b. the remote desktop section, select "allow the connection of computers running any version of remote desktop (less safe).
  5. apply the settings.
  6. restart the computer and try to connect to the remote computer.
  
  For more help on desktop connection remotely, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems
  For more information about remote desktop, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• "Cannot connect to 201.86.73.83 remote connection! (what could cause this popup? where to check?)

  I tried to ask as to make following the question to someone else, but no response; try as a new query.

  DSL, router Linksys (tomato), a Windows 7 computer, put in place last November for the new project of a member of the family.

  The person who has implemented it access distance.  Here, it is used for Word and Excel, no music or video online.

  I came yesterday morning and found a popup in the lower corner toolbar on the right that says:

  "Cannot connect to 201.86.73.83 remote connection!

  (the IP is in the Brazil, I've never heard of him, found nothing more on this subject).

  The person who set up the machine has a long experience of Windows, changed some settings on the router and says "there is no evidence of the intrusion, so don't worry.

  But I know in general that "the absence of evidence is not evidence of absence" - so I'm still a little worried and if I see that again once I know what it means or where to look.

  Is there a log file where I could search by application (which one?) no matter what happened in the hours before, I noticed that popup?

  I do not know what newspapers is relevant if I can get to the lists and create a custom, view if I knew what to check.

  I don't know how long the popup is also present on the screen, the machine had been on it during the night and as soon as I took a screenshot of popup is gone.   It would be over an 8 hour period I want to check out.

  Hello, Hank

  With the information given, it is impossible for us to determine what came from this message. If it just happened one time, it may be safe to ignore.

  To be sure, it is not malware or a trojan virus, you can do a full security sweep.

• Error: Remote connection software does not support network level authentication.

  Original title: REMOTE ACCESS

  I have windows 7 ultimate and the remote connection software supports network level authentication.

  Isn't he supposed to in this version?

  Thank you

  It should be, but there are several remote desktop client updates that came out in the last 6 years as of the optional updates on Windows Update, so I would check that you have all the control panel.

• Cannot get remote connection to the computer or phone

  Original title: sentinel160GB Network CCTV connection

  I have the apparently mandatory sentinel160GB CCTV and the system works OK, but for the life of me I can't get the remote to my PC or telephone connection to the or see same DVR?  Help

  Hello

  1. don't you get error message when you try to get the remote connection?

  2. you talk about Digital Video Recorder?

  3. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Enable remote connection

  Hello
  Inside my business machine Win 7, I see that this has already been enabled (checked) below. Why can't I connect using the Terminal Server service?
  http://DL.dropbox.com/u/40211031/T121.PNG

  Remote connection services are started?

  http://www.sysprobs.com/wp-content/uploads/2010/02/services.PNG
  Also, make sure that the windows firewall is not blocking him.
  http://www.sysprobs.com/wp-content/uploads/2010/02/remoteenabled.PNG

• Error 691: The remote connection has been refused

  I'm trying to make the VPN connection in windows 8 surface device to my winserver 2003, but it gives me error

  Error 691: The remote connection was denied because the user name and password combination you provided is not recognized or the selected authentication protocol is not allowed on the remote access server

  In fact, Microsoft has changed the protocols on windows 8. Windows Server 2003 does not include the new Protocol, so it will reject the connection. There is a work around where you can reduce the security of windows 8, so that it can connect VPN on windows 2003 server.

  Parteeks

  Server questions should be asked on the Technet site.

  http://social.technet.Microsoft.com/forums/categories/

• Photoshop remot connection problem Android

  Version the most recent Photoshop 2015.5 CC is not connect with any app connecting remotely. It doesn't with Iphone, but only on the Androids.

  I used two apps

  1. Pixl Preview Android app
  2. The Android of Preview application

  Both give the error could not connect to the server, I even disabled my Antivirus Firewall but no luck... Can anyone help with this

  I entered the correct password and IP

  Overview of the Photoshop feature seems to be for decices IOS with Adobe Preview CC app via the port USB or Wi - Fi and the mobile must be connected on the cloud creative with the same user as the machine of Photoshop Adobe account.  See in Google is a game indicate that these two android applications work with Photoshop, no additional software is necessary. Remote connection must be selected in Photoshop.

  I installed Pixl overview on my Galaxy 8.4. and address critics on the left to see his walk through.  In Photoshop used CC edit > remote connection.  I checked in the preferences dialog box allows the connection distance and entered a password for the connection.  A warning from windows, poped upward firewall connection.  I clicked on allow access for connection. After finishing the Pixl preview through I hit the check mark.  Which brought up the login dialog box. I entered "Server of Photoshop" in the top field. finish the ip addresses in the second field and enter the password in the third field. Then hit the check mark.  Then, I saw the document I opened on my Galaxy Android 8.4.   I have not installed Android Preview.

  Normally, I connect my Galaxy from 8.4 to my Workstation Windows 10 as a third screen via Chrome and Spacedesk a virtual display driver installed on my workstation. It takes just a web browser on the android tablet.  A firewall rule is install as part of the installation of SpaceDesk an all my workstation, you need to know about the workstation is desktop local ip address and spacedesk base URL or a bookmark.

  

• Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Hi Mallik7, please try the following steps, you must succeed to solve the problem.

  To connect a client to vCenter directly to the ESX host error-free work.

  Files/etc/vmware/config the ESX host contain the lines:

  ------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ------------------------------------

  This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

  1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

  CP/etc/vmware/config/var/tmp /.

  2. edit/etc/vmware/config so that there is a return transport after the line:

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  While he reads the following:

  ---------------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ---------------------------------------------

  3. restart the management agent spend.

  Note: Make sure that you are not in your environment name resolution problems.

• My - Sql Remote Connection DW CS3

  This may seem like a silly question, I apologize in advance.

  I created a database on my local copy of mysql (wamp). I have created a successful database connection in dreamweaver as I was testing my site on my local test php/msql server.

  I am now testing it on my ftp server remote and have no idea how I would create a database of remote connection. When I put locahost in mysql server field in the control panel link, that I can no longer access my database because it is local and I work remotely.

  My question is how do I create a remote mysql database, and how do I transfer my local databases (direct test server) remotely and, possibly, for publication on the web?

  How to create a remote database is something that you will need to know if your hosting company. Some companies create the user account and the database for you. Other companies allow you to set up your own databases and user accounts via the host control panel.

  Once you have a remote database, you transfer your local database by exporting the data and table structure to a .sql file. Then use this .sql file to import the data in the remote database. You can do that with phpMyAdmin. Use the tab export on your local version of phpMyAdmin, select the option to save the data in a file. Once you have exported the data, go to the version of your host of phpMyAdmin, select the import tab navigate to the .sql file that you have already saved and import the data. You can also use Navicat or other MySQL front-end programs to make the transfer for you.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.