failure ID: me737t - 5A 3634-xd002k-60u603

Similar Questions

• failure ID: m8dl-48-5b35ql-xd002k - sr 60, 03

  My laptop does not start at the top.  I get a message on there is a kind of disk failure with instructions to press ctrl, alt, delete.  After that need me anywhere.   I pressed ESC to interrupt the boot and ran a test.

  The short DST failed and gave me the failure code: m8dl-48-5b35ql-xd002k - sr 60, 03.

  It lists my product as id: xg737ua #ab

  Hard drive

  Hello

  Error 303 would indicate a failure hard Driv

  If your laptop is still under warranty, contact HP and arrange for the HARD drive replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If your laptop is out of warranty and you would like a guide on replacing yourself, let me know.

  Kind regards

  DP - K

• What is ID 94X83G - 60267 A-MFKR4K-60U603 failure

  on self-diagnose run, hard drive, at end of test, I get failure ID 94X83G - 60267 A-MFKR4K-60U603.

  Contact your computer for using manufacturer - almost certainly, this means that the drive has failed.

  Make sure that you back up your data to storage outside as soon as possible!

• DST short failed. the information of failure has been given

  My PC turns on but when the desktop icons should appear that the screen turns off on the keyboard, the internet light will not show that it is online, nor how depressed he will change. I ran a test that ended by a short power outage starting DST. The failure of ID:6C703H - 5HT6G6-XD002K - SR 60, 03. -What this means and how can I solve this problem?

  Hello

  The ID of the failure will be either a Smart failure or disk Self Test - the two would indicate the hard drive is broken and must be replaced.

  If your unit is still under warranty, contact HP and arrange for the disc replaced.

• HP pavilion dv7 will not start

  my hp dv7 prodcut id xh116ua #abc fails to start.  Boot starts and also gets a flashing with windows start logo then the screen goes black and nothing happens

  Advanced sys diag worm 3.7.0.0 result is drive hard failure id Q32F8M - 59L 777 - XD002K - 60 QT 03

  any Advisor.

  Maybe it depends on exactly why the drive has failed and went to where he is.

  You may be able to find an adapter that plugs into the drive hard sata and a USB port on your laptop. Perhaps TigerDirect.com or Ebay? Once you have the new installed hard drive and operating system in place, you can plug it in and try to access the drive through Windows Explorer.

  If this does not work, and depending on how much you need the files, you can download something like Hiren Boot CD that has a few tools in it that can allow you to access the data, but which may require considerable time and effort to understand and use the tools correctly.

• my HP laptop will not start

  I tried to open it through safe mode, but it just frozen and did not open. This happened once before, but it opened in safe mode, that day.

  I opened the system diagnostics and did a test that does not start. Failure ID is:

  PU28Q1-5AD5659-XD002k - 60-X 303

  another failure ID is: PU28Q1-5AD5TC-XD002K-60SF03

  Please tell me any information you have to help.

  Thank you!

  Hello

  You are welcome

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - for more details, see the document here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• ID QBQKNM-5956QC-XD002K-60DD03 failure

  I have received a warning that Windows detected a hard disk problem

  

  I ran a diagnosis of hard disk and the next failure ID QBQKNM-5956QC-XD002K-60DD03 came, I can't find any reference to this failure.

  Before this warning I had not seen any signs or symptoms... Can someone advise please what this failure to find the cause. Thank you.

  Hello

  Only HP can tell you the exact meaning of these codes of 24 characters, but the error code will be a Smart failure or disk Self Test - in both cases, this would indicate that the hard disk is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• ID UE10R0-5AS654-XD002K-60SM03 hard drive failure

  Hello

  I can't boot the system - drive Test hard Watch:

  DST short: failure

  Failure ID: UE10R0-5AS654-XD002K-60SM03

  Product ID: XZ086UA #ABA

  Help, please.

  Thank you

  P.

  Hello:

  You can buy a new SATA II hard drive for laptop to your computer laptop dv6-3210us.

  You will also need the recovery disc to reinstall the operating system.

  Here is the link to the service manual for instructions on how to remove and replace the hard drive (see Chapter 4).

  http://h10032.www1.HP.com/CTG/manual/c02659236.PDF

  If your laptop is still under warranty, contact HP technical support for further instructions.

  Paul

• hard drive failure - means following error: failure ID 9cw77a-5km5t8-xd002k - 60s 903?

  Hello

  For 6 months, I have HP Pavilion dv6 3180ec, Win7 64 bit running.

  Recently the laptop itself restarted several times over the past two days with a hard disk failure message (blue screen); After the reboot, a hard drive diagnostic was requested however never properly started... Run the test from BIOS and I have following error message:

  Hard drive test failed

  Failure ID: 9CW77A-5KM5T8-XD002K - 60S 903

  (interesting is that the SMART test successfully)

  Someone knows, is the gravity of failure? HARD drive change is necessary? I would avoid the situation to send it to HP customer service to guarantee control and have no laptop for a month, that guys will not suffer the same problem (actually even if I now write the post on this laptop - and without everything again...)

  THX

  F.

  Hello

  If this isn't a SMART error, this will be a failure of the drive Self Test short or long and really would indicate that the drive needs to be replaced.  There is no need to have to send the laptop, as if you contact HP to get a new HARD drive to be shipped to you under warranty, the player will be sent to you - you normally pay a guarantee that it will be refunded when you return the defective HARD drive.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  The procedure to replace the HARD drive appears from Page 55 of your & Maintenance Guide.

  Kind regards

  DP - K

• G42-415DX Notebook PC: short DST: FAILURE

  I try to break and eve of trial...
  Response
  a "short DST IMPOSSIBLE
  Failure ID: 67GKXQ-5AL7B1-XD002K-60WB03

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Pavillion dv6 notebook PC: P PC Hardware Diagnostics UEFI - test failure

  HP PC Hardware Diagnostics UEFI - Wide system Test

  Failure ID: 6FH3UT-5AF85H-XD002K-60W103
  
  Product ID: LG266PA #ABG

  The hard drive gave error failure - ATA, model type is serial ST9500325AS [personal information]

  WHAT should happen?

  Also battery check: primary - calibration required (21) - How to calibrate?

  And I don't understand why they provide HP PC Hardware Diagnostics UEFI - if their information so that it does not exist.

  The hard drive has failed and needs to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get one of at least equal quality of the original in order to use recovery media to install the drivers/software/Windows on the new hard drive. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  Calibration of the battery:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-3200-entertainment-notebook-PC-series/4308480/model/5051632/document/c00821536#AbT3

• Failure short DST

  A ran Diagnostics and it comes back with DST short fail and this code failure. UALFTR-5HJ753-XD002K-60U003. Can you tell me what this code means? Thank you very much!

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  Only HP has access to the required software that can give a more specific cause, suffice it to say that if the machine is under warranty, the error is sufficient for the drive needs to be replaced

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• GQE44M-5B06AB-XD002K-60QB03 (via BIOS) error message

  I have a HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC.

  Recently, my computer began to freeze at the Windows startup screen. I ran the BIOS (by pressing F2 at startup) and received the following during a diagnostic test error message: GQE44M-5B06AB-XD002K-60QB03. Apparently, she is related to a kind of disk failure hard (even though the system BIOS did not a lot).

  What would be the best way to go forward? Thank you!

  Hello

  Computer users eager to see this message. Please test a HARD drive:

  1. reboot the computer.
  2. keep pressing the F10 key when appears the HP logo. This will take you to the Bios configuration utility.
  3. Select the Diagnostics tab.
  4. Select the option "drive hard test" and press ENTER to perform the test.
     Note: This test can take up to 40 minutes or more.

  Pass - the hard drive is not damaged.
  -In the case of a failure of the hard drive is damaged and may need to be replaced.

  Kind regards.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Assistance required after you download Sierra - locked in a spiral of failure of the Installation

  Hello - I am a student of the University who made the mistake of thinking I had to upgrade my OS system after seeing some updates new flashy in the Sierra. Long story short, that my computer is locked into a cycle where I restarts and the installation process will begin installation but end abruptly and ask me to reboot again.

  I have exams and papers due and seriously want access to my data again. I don't have a back up of my files. As such, I am looking for a method that will allow me access to my files that I need to be able to read notes, print etc.

  Details: I have an old MBPro by the end of 2011. He was on as the primary OS x Lion. I had updated some time later. More recently, I got El Capitan and it worked very well. I downloaded Sierra in the background as I did work at home and after installing it, it asked me to reboot. This was the point that I was able to come back from. Reboot after installation scenario is as follows:

  -A progress bar comes up saying 34 minutes until completion

  -The progress bar goes to 33 minutes until completion

  -Beginning of fans of my computer acting upward and the bar stops and crashes of progression

  -The installation process says he doesn't have and asks me to restart my computer

  Specifically, I get the message 'Mac OS could not be installed on your computer. File system check or repair a failure. Quit the installer to restart your computer and try again. »

  When I quit the installer of the OS, I am taken to the startup disk option and asked to choose a system to reboot my computer with. I see 'Macintosh HD macOS 10.11.4' but when I click on it and try to restart I get the following error message, "you cannot change the disk on the disk selected. Startup disk could not gather enough information on the selected disk. »

  Things I've tried:

  Internet recovery mode: I went here to do a restore of the Mac OS x comes with my computer (Lion). This attempt fails and the computer tells me I can't downgrade because a more recent OSX is already on my computer...

  Recovery mode: I tried to come back just El Capitan from here. When I try to do the process will take literally one second before I get a notification saying: "an error occurred during the preparation of the installation. Try to rerun this application".

  Disk utility: I tried to do first aid and repair on this menu on the big disk image (since some of them pop up... I'm sure that the big one is my computer and the small setup of Sierra is?). I see that I 115Gigs franco 319Gigs departure. When I click on check and repair, the process takes some time and seems as he goes to halfway through before I get errors in the two. Repair error wonder backup my data.

  -some specific stuff; the journal for the repair of first aid says something like: the Macintosh HD volume could not be completely checked. File system check exit code is 8. Update support partition for the volume as required. File system check or repair a failure. Operation failed... »

  Safe mode: I can't start in safe mode. My computer will load the apple logo, progress on 3/4ths of the way start-up and then crash on its own and not restart.

  Things I have tried:

  Constituting a new boot USB of OS Sierra - I read that in so doing I can substitute the installation process that is going on right now on my computer and start a new... I hope one that works. I was not able to do this again, because I need someone to another macbook to make it and none of my friends won't let me touch their computers after the fiasco that happened on mine... Can I get some feedback on this?

  Backup: I don't have an external hard drive... I'm willing to buy one if necessary, but I don't know how to make a backup in a world where I don't have access to the major functional sections of my computer. Also, if my computer is * session here now, I'm worried that a backup will be essentially a * a backup... is this the work of the computer?

  Other thoughts:

  -my computer was working fine before I tried the upgrade... no complaints on my end, it was a real trooper

  -Maybe the download was corrupted?

  -I learned today that the operating system installation process requires internet connection - maybe that my internet connection is bad?

  -on that note, I want to say I tried a lot of different things. Been in different parts of the campus (different parts of my dorm building, IT support across campus, etc.). My University has also 3 options of WIFI, but each requires a separate verification process. Throughout this process, I have been connected to one of these methods. Switching may help? But, if I can't do the verification step (i.e. open a browser and type in the details of my student specific to actually use the web), I do not think that this will help you a lot. In addition, I am sure that I am already using one of the less frequently used options.

  I want to avoid a permanent possible deletion because there are important things on my computer.

  Any advice? Enjoy it!

  Same problem here on my Mac Mini end of 2012. I couldn't find any fix so far. The machine worked perfectly fine before with El Capitan and had about 50 GB of available disk space. I have use any version beta of Sierra, but officially released one that came yesterday. Really disappointing to see the new system operating software with fundamental questions and no good way to solve it.

  Any help really appreciated.