Failure of backup upfiles

Similar Questions

• Pavilion 6610f desktop: HP Envy & WARNING: drive hard Imminent failure (please backup and replace immediately!)

  Recently, I had 2 different cats with HP Tech Reps in which they used their remote control programs to check on the problems that I had with my new HP Envy 5560 all-in-one.  The next day, at the start of my desktop PC, I got the warning message: "" imminent hard drive failure: if it please take a full backup and replace immediately. "" I did a scan from HP and it showed nothing wrong. There are no pop icons - up or whatever it is on my desktop screen to indicate a problem.  The hard Seagate I have is only 1 years and 89% free space left on it and there is no problem, other than being slow sometimes, before the cats remote and the PC warning.  I came to the forum looking for answers, and the first thing I noticed was a post to say today 09/04/2015 Bent Canuck: "HP Envy Hard Drive Failure" at 06:22. What a coincidence. Think are?  Only some 20 hours from the time I myself first 'hard drive Imminent failure warning' and only about 40 hours after the remote programs have been downloaded (twice) and the rep tech, taking control of my computer (twice).

  I ran all the diagnostics that my intermediate PC experience tells me to do.  I checked in the BIOS and I checked all the HP, troubleshooting, etc. on the Assistant HP program performance. I can find no reason for the hard drive to be failing.  I didn't notice it do anything else to be a little slow to start sometimes and slow to load stuff onto the internet, I have assumed it was probably malware and spyware that I must find a way to remove at one point, but I have received no warning about things either.  I get the same caveat and I did a full back, but...

  Can someone tell me what to do or how to check and see what the problem is until I have to just chuck the drive because of this warning?

  Thank you for the additional information.

  Did you run the BIOS CHIP to test your hard drive?  Also, I don't think that the added hard disk HP software had nothing to do with the message you receive.

• 1720 smart hard drive detects imminent failure. do backup - how can I move my files when I get a new hard drive?

  Hi, I have "1720 smart hard drive detects imminent failure" made a backup, Gather I have to get another drive. How can I transfer my windows vista / files to new drive? Help, please.

  Hello

  There are different ways to do

  and these methods depend on your hard drive work

  hard drive manufacturers will normally provide the cloning to move your operating system software from the old to the new drive hard If your old hard drive still works

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. If vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new drive hard If the old drive still works

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• failure of backup with CloudKit errors

  My iCloud backups have been failing since May 7 with the error "the last backup failed.

  It is an iPhone running iOS 9.3.2 6s. I deleted the old backups, backups iCloud extinguished/turned on and restarted my iPhone several times but always regularly backups fail. I have 50 GB of storage iCloud and over 20 GB of available - Indians backups previously consumed only about 3-4GB. I have 15GB of available storage on my iPhone itself. Backups performed for about 2 hours before failing. I have an internet connection broadband and does not suspect the errors on the network.

  In order to diagnose this problem, I connected my iPhone to my Mac and captured the underside of the iOS console messages.

  This shows CloudKit report errors that cause the backup to be marked as failed.

  Everyone knows similar or anyone is able to help solve what could cause this problem?

  Thank you

  The 25 mai 11:24: 24 backupd [420] < WARNING >: ERROR: unable to disable backups

  The 25 mai 11:24: 24 backupd [420] < WARNING >: WARNING: during the backup of modified files

  The 25 mai 11:24: 24 backupd [420] < WARNING >: INFO: new attempt after soft error: active record failed to the path ' / var/tmp/tmp.531.J8nkLZ ' (CKErrorDomain/4). That underlie the error: active record failed to the path ' / var/tmp/tmp.531.J8nkLZ ' (CKInternalErrorDomain/1013). Underlying error: the operation could not be completed. (error com.apple.mmcs) 7 (com.apple.mmcs/7). Underlying error: the operation could not be completed. (com.apple.mmcs error 12.) (com.apple.mmcs/12)...

  The 25 mai 11:24: 34 backupd [420] < WARNING >: warning: a retry after error: CKError 0x1273e8770: "Network outage" (4/1013); "Save Active failed" >

  The 25 mai 11:24: 34 backupd [420] < WARNING >: INFO: recover a quota from waiting area items: HomeDomain

  The 25 mai 11:24: 35 backupd [420] < WARNING >: INFO: downloading files of domain: HomeDomain

  The 25 mai 11:24: 35 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (101613 instead of 19145054)

  The 25 mai 11:24: 35 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (16788076 instead of 19145063)

  The 25 mai 11:24: 37 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (99197 instead of 19145156)

  The 25 mai 11:29: 31 backupd [420] < WARNING >: WARNING: during the backup of modified files

  The 25 mai 11:29: 31 backupd [420] < WARNING >: INFO: don't not retrying after soft error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKErrorDomain/6). That underlie the error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKInternalErrorDomain/2022). Underlying error: the operation could not be completed. (error com.apple.mmcs 16.) (com.apple.mmcs/16)...

  The 25 mai 11:29: 31 backupd [420] < WARNING >: ERROR: backup failed: CKError 0x125dcb650: "Service unavailable" (6/2022); "Current record has failed." Try again after 3.0 seconds >

  The 25 mai 11:29: 31 backupd [420] < WARNING >: ERROR: = backup failed: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKErrorDomain/6). That underlie the error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKInternalErrorDomain/2022). Underlying error: the operation could not be completed. (error com.apple.mmcs 16.) (com.apple.mmcs/16)...

  I managed to solve this problem using 'Reset network settings' (settings-> general-> reset) - all errors of CloudKit went and the backup was immediately a success!

• HP Pavilion 6653w "imminent hard drive failure! "Backup and replace. Questions.

  Hello, I have a HP Pavilion 6653w with Windows 7 Home Premium desktop computer.   It is 4 to 6 years old.  Recently, when I start it, I get a message "imminent hard disk failure!  Please save and replace as soon as possible."  I've never had to replace a hard drive before, so I have some questions:

  1 should. what type of disc do I replace - be of the same type that I have now?  (Hitachi, 1 TB).   Is there a list somewhere that shows which drives are not suitable for my computer?

  2 - is a mechanically inclined person (my husband) could do at home, or that it does not require a professional?  My husband has replaced a front memory card, we just request if it is similar to the one in trouble?

  Thank you!

  http://support.HP.com/us-en/document/c01315257

  This link will take you to a document on the withdrawal and the replacement of a hard drive on a HP or Compaq desktop computer.  If it is not identical to your case, it will be a little similar.  The point is, that it is not terribly difficult; This is something you might be able to tackle yourself, or with a friend who has some experience with computers.

  I hope this helps.

• Failure of backup due lack of space

  Running Norton 360 and every time it comes to backup, that he can not due to the lack of space. Can I delete some of the data on my HP SimpleSave backup? If so how to do that?

  I found the problem late last night. The system was back up on my G drive rather SimpleSave drive H so, naturally, there is a lack of space!

  Problem fixed but thanks a lot for the quick response from you.

• Failure of backup system image 0x8078002A

  Attempted to create the first image time system to a Dell Inspiron 15 to an external Samsung S2 hard drive obtained after error message:

  The backup failed

  One of the files of backup could not be created. (0x8078002A)

  More information

  The request could not be performed because of an i/o device error. (0x8007045D)

  Although he said he had failed files were created on the hard drive, but when he tried to run the first scheduled backup I got:

  Check your backup

  The last backup failed

  Also, the last backup is always set to never

  But once again the files are on the hard drive.

  Can someone pleasse help?

  Thank you

  Hi royaltg,

  Check if all files have been created on the hard drive.

  Check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Make sure that the startup type is automatic.  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error": http://support.microsoft.com/kb/952272 (for Windows 7)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failure of backup system image 0 x 8007003

  I tried to back up my system drive, but suddenly everything back up he stuffed me an error...

  Backup Failed: System image backup 0 x 8007003

  Please help me in this regard...!

  Hi Natasha,.

  Thanks for posting your question in the Microsoft Community Forums.

  According the description, I understand that you are trying to back up the system drive and you get an error: failed to backup system image 0 x 8007003.  Please don't worry. I'll help you with this problem.

  You use a third-party backup software?

  You can follow the steps in this article and check if it helps:
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455

  Get back to us with more information after the completion of these steps and let us know the result and I'll be happy to help you.

• Backup issues 'MyBookLive '.

  I got this error message during backup time machine. "Unable to complete backup. An error occurred when creating the backup folder".  I just had this problem since last January 4. Any help?

  I have IMAC 27 inch end 2014 model, OS El Capitan version 10.11.2 (15 c 50)

  I have MyBookLive external hard drive.

  rphiif,

  I think that you use to make your Time Machine backups. If Yes please look over the end Pondini troubleshooting Time Machine FAQS and began in the failures of backup section. The link to the site is: http://pondini.org/TM/Troubleshooting.html

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• Windows Backup Failed: The system cannot find the specified file. 0 x 80070002

  Hello

  I had problems, make my weekly backups with Windows Backup and restore utility.

  I tried three different times, and they have all failed with the error message:

  "Failure of backup Windows: the system cannot find the file specified."   0 x 80070002.

  I went through almost all of the threads in this forum about this, and none of them seem to work for me.

  I went through the register of audit in this thread (http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx) and all records were correct and have no errors.

  I also went through this thread: http://support.microsoft.com/kb/979281/en-us

  I'm confused how to proceed with a resolution of 1 scenario; I finished scenario 2 of the resolution and the resolution of scenario 3 does not apply to my problem.

  I was able to complete the portion of the data backup, just am not able to finish the part "create a System Image", i.e. when the error message appears. I check back up data with the options "Restore my files", and as far as I know, all the files are there.

  So, what should I do then?

  Suggestions or comments are much appreciated.  Thank you.

  Hi all

  I'm sorry to post an update so late. I was waiting for my 1 TB External Drive happen so I can retry the backup.

  I tried the solution in the link that User2@16 post:

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/thread/53b7a2c4-33c3-4c0f-a6fd-715abe36f1f9

  And finish the backup without any error message more.

  What I did is to assign a "drive letter" in the drive titled "RECOVERY", which has no drive letter in a first time.

  Image of my system and backup were created successfully last night.

  Thanks again for all your help. It is much appreciated.

• Smartphones blackBerry backup fails with Error Unknown DM.

  I hope someone here can help me out.  I spent about 4 hours so far, googling and each ant known to man looking for a reading.  Here's my situation.  I have a VZW storm and upgrade to OS le.75.  I tried to back up my camera first by using Desktop Manager, but it fails every time.  It is confusing because it will fail at different points, but always with 'Unknown error' (very descriptive, eh?).  In any case, I have tried everything battery pulls, clear cache, reinstall DM, disabling all FW/AV, disabling UAC software and every combonation it.  Still the same descriptive error.  Someone knows this, or does anyone have a solution?  Here is my system config:

  VZW 9530 OS Storm.65

  DM worm. 4.7.0.32

  Windows Vista Ultimate 64-bit (SP1)

  Processor AMD Turion 64 x 2 of HP Pavilion dv6000, 4 GB RAM

  Thanks in advance!

  FYI everyone who think they have found a solution to the constantly (and I mean constant) lack of backups.  Sure, you'll find that it works once you found that 'fix', but eventually the failure of backups will come back and sooner than you think.

  The problem is in your browser's cache.  That's the short answer.  I don't know why, but every time that a failure happens during backups everything I need to do to remedy the situation is to clear my browser cache and your Uncle Bob.  For backup/restore in your DTM and click advance.  Go in the cache of your browser and click on "delete".   Return to the last page and save.

  RIM needs to find a fix for this ASAP.  This is a problem for late gen Blackberrys - not exclusive to the storm (GSM or CDMA)

• Failure of the image due to the 'partition reserved

  Below the line continues is a solution posted in 2010, but given my situation I can proceed with this solution?   This technuique seems to work, but what happens if the "reserved" partition is already 450MO & the error so that it occurs. In fact this happened to me. I first encounted error 0 x 80780119. I followed this procedure & repeated the backup. The backup failed then an error different 0x8079012D on a bad sector. Then, I scanned both my hard drives internal & external & applied the FIXES everything that was found. As a result, I repeated then backup & the original error returned. Scanning the partition "reserved" via "Disk Manager" the partition which went from 100 MB to 450 MB now has 20 MB of free space. If this partition has completed over the successive failures of backup.

  Is it SAFE to extend this partition more away? I keep seeing statements not exceed the 500 MB?

  _________________________________________________________________________________________________________________________________

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Hi Jeff,

  Although I have not tried myself, I don't see the problem to the expansion of the space in question. In fact most of the threads I've read point to extend the drive.

  For clarification, I would advise to post using the link below:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  hope this helps,

  B Eddie

• RMAN delete policy has not worked and not delete outdated backup

  Hi all

  I am facing a problem this obsolete backup is not delete unwanted backup.

  I used to take level 0 once weekly and cumulative incremental in 3 times a day.

  I have 2 TB hard drive, every week, I used the backup from command remove obsolete based file can delete based on my redundancy strategy 1.

  The previous week it works fine and deleted obsolete backup based on the deletion policy. but this week when I try to use the delete obsolete command, it is not removed and the hard drive is always full and I couldn't take later backup.

  It's live server, I need to take the free space on the hard drive. Please help me.

  You will find details of error that I met in the log file.

  output channel: C1

  output channel: C2

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of backup so archivelog command at 05/05/2015 10:57:14

  ORA-19502: write error on file 'G:\RMAN\AWSPROCESS\BACKUP\AWSPROCESS\BACKUPSET\2015_05_05\O1_MF_NNND1_TAG20150505T090032_BNJGC9RR_. BKP", the number of block 7227648 (block size = 8192)

  ORA-27070: async read/write failed

  OSD-04016: error queuing an asynchronous i/o request.

  S/O-error: (OS 112) there is not enough space on the disk.

  Your backup on May 02 is not a valid backup, then you can try something like:

  RMAN > delete database backup completed after 'sysdate-6 ";

• RMAN incremental backup issue

  Hi all
  
  I'm read on Oracle11g release2 doc RMAN.
  
  In Chapter 9:
  
  "For example, you can implement a three-tier backup plan as well as a level 0 backup is performed every month, a cumulative level 1 is taken from the week, and a premium of level 1 is taken daily. In this strategy, you will never have to apply more than one day to complete recovery redo. »
  
  First I got an error when I try to make a level 0 backup

  RMAN> BACKUP INCREMENTAL LEVEL 0 database;
   
  Starting backup at 27-APR-11
  using channel ORA_DISK_1
  using channel ORA_DISK_2
  using channel ORA_DISK_3
  using channel ORA_DISK_4
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of backup command at 04/27/2011 20:42:19
  RMAN-20021: database not set
  RMAN-06031: could not translate database keyword

  and if the success of step, how I would go about to implement this?
  I can do this via dbms_scheduler? or I need to do this via cron?
  
  -Thank you very much for the entry

  Your DB must be in use archivelogmode use hot backups. Is your db in archivelog mode?