Failure of geolocation BB10 Simulator

Similar Questions

• The adjustable BB10 Simulator it is date and time automatically?

  I have the installer of BB10 Simulator (10_2_1_2234) and works generally well on my Mac OSX (10.9.2 Maverics) system using VMWare Fusion 6.0.2 (1398658).  Everthing is in the latest versions as far as I can tell.

  However, even if in the settings / Date and time, the "Set Date and time automatically" switch to "On", whenever I start it, it displays the last time I used it.

  I need to manually enter settings / Date and time, turn the "Set Date and time" automatically to 'Off', set the date and time manually, then I turn the "Set Date and time automatically" button return to 'On '.

  My application itself is able to send and receive data over the network.  I can use the "Browser" application to see the web sites.

  How can I do set the date and time automatically?  Y at - it VMWare Fusion setting, I need to change?

  Thank you

  Ed Federmeyer

  If you resume your virtual machine session, the time that the virtual machine has been suspended is used.  If you "Power Off" the simulator it will update it's time to start.

• BB10 Simulator on Mac hangs just at startup - Parallels 7

  The BB10 Simulator works on Parallels 7?

  I was able to get the things installed but when I run it it crashes. Any suggestions?

  Thank you

  

  This is not a tested configuration.  The Simulator can run in native mode in VMWare Player on Mac, so you should use Parallels.

• Requirement of the graphics card dedicated for BB10 simulator

  Hi, the blackvery website developer, I found the infromation that BB10 Simulator requires NVIDIA GeForce 8800 GT or higher to an ATI Radeon HD 2600 or higher graphic. This affects when even if the pc has the graphics card integrated rather than required. I mean I can run the Simulator very well, but this will affect anyway if I run an opengl project in the Simulator? Thank you.

  The BlackBerry 10 Dev Alpha Simulator uses OpenGL 2.0.  If your graphics card does not support it you can have problems (some only show a black screen).

  If you see a black screen you can try the software rendering mode (choose option 2 before boots simulator), but you could still see some rendering issues using this mode.  In addition, it is going to be slower.

• BB10 Simulator on Vmware ESXi

  I'm trying to get the BB10 Simulator to work on a VMWare ESXi server. Here's what I've done so far:

  1. Installed the Simulator on yhe development machine, started VMWare workstation, open the vmx file and downloaded the VM on the ESXi server.
  2. Disabled 3D acceleration on the machine virtual (on ESX) and selected 'Full touch safe mode' after starting the virtual machine.

  At this point, the virtual computer screen displays the IP 'telnet ftp ssh qconn', the axis of the device and the build number.

  The next step is to connect the Momentics IDE to this virtual machine.

  The Simulator is in need of a vmx file configuration dialog box (likely to run vmware specific commands). In the configuration of ESXi, there is no vmx file.

  If I try to connect to the virtual machine by IP address, I need a device password, I did not.

  Someone at - it suggestions on what do I do now?

  In response to my own question because I found the answer:

  Now that I have the IP address, I just follow the steps described in

  http://supportforums.BlackBerry.com/T5/native-development/BB10-native-Cascades-SDK-not-connecting-to...

  Because I had never set up a password for the Simulator, I left the empty password field.

  Copy-paste the details:

  Of your IDE

  -Right click on your project in the Project Explorer

  -Go to Blackberry tools and click on configure target...

  -Click Add new target it... button and enter the IP address of your Simulator in the host name or IP address field, enter your password if you have one then click on finish

  To run your application on the Simulator:

  -In the Project Explorer view, double click on file bar - descriptor.xml, then click on chip Debug Set button to set the author of the application information.

  -Set the configuration of the correct version for the Simulator first by right-clicking on your project and selecting Configurations of Build > Set Active > 4 Simulator-Debug.

  -In the Project Explorer view, right-click the project and select build project.

  -Right click on the project again, and then select run as > BlackBerry Application C/C++.

• BB10 Simulator speed is low

  Hi all

  I had a problem about the very slow speed of the BB10 Simulator. I installed VMware 5 and the BB10 simulator 10_0_09-1101. The hardware configuration of VMware to run the Simulator was the following: memory: 1.5 G, number of processor cores: 2. I run the software on my laptop HP pavilion dv5 (corei3 2.27 G, 3 G Ram, graphics intel HD).

  Is the configuration of my laptop, not enough to run the Simulator or I don't have some setting or configuration? I'm looking forward to your media.

  Thank you

  have you enabled virtualization in the bios of your computer?

• BB10 Simulator - how to stop?

  How can I stop the Simulator? I tried a little bit about all the keys on my keyboard, and none of them does not seem to do something special. I'm assuming that actual devices have a power on / off button, or * some * way of turning the device off, then how could I do on the Simulator?

  Please note: the 'power off' option in the VMware Player/workstation is NOT the way to do it. It would be the same as 'pulling the plug' or ' withdrawal you battery while the device is still on ", which is extremely bad.

  I must be missing something.

  You can use the controller bb10 program (installed in the same location as the Simulator) that simulates the hardware buttons (among others) on the device.

  While a power-reset to zero through vmware is more convenient and does not side effects cause unwanted imho

• bb10 Simulator in chrome still exist?

  There's only native Simulator http://developer.blackberry.com/html5/download/

  Simulator of html bb10 (CRX package for chrome) still exist?

  I think I need to download .crx file and add to chrome

  or

  BlackBerry has removed the option of the Simulator in chrome?

  Your comments welcome

  At the bottom of the download page, you can click on the user interface that asks you if you want to access WebWorks 1.0. This will show tools WebWorks 1.0 that includes ripple. That said, we have not updated ripple WebWorks 2.0, so if you have moved to WebWorks 2.0 you will not be able to work with ripple

• BB10 Simulator stuck on 'Get IP'

  After I updated my PC for Windows 10 my Simulator BB10 stopped to retrieve its IP address, I downgraded to W8.1 and it worked for a day or two, but he is now stuck with the message "Get IP" in the lower left corner of the Simulator.

  I have re-installed the Simulator and checked the connections of VMWare, it creates are enabled, but I had no luck.

  Someone has encountered this before and fixed it without reinstalling everything?

  Thank you

  Try to modify the Virtual Machine settings, changing the network card configuration.  According to what you already have, try bridged, host-only or NAT.  Change the network type usually resolves these types of network conflicts.

  Make sure also that you have the latest version of VMWare Player installed and do not of Microsoft Hyper-V installed (it is often in conflict with VMWare Player).

• Http request message with BB10 Simulator test

  Hi all

  I implement request to send http request and receive the response from the server.

  Earlier for testing with simulators, we used MDS for the connection to the server.

  How to test this application using Simulator BB10 Alpha? Kindly let me know.

  Thank you and best regards,

  Shubhangi

  Hello

  I use more kink for reference: it is very useful.

  https://developer.BlackBerry.com/Cascades/documentation/device_comm/networking/tutorial_http_comm.ht...

  Also in my code, it was typo. Now the http request has been published to server correctly.

  Thank you and best regards,

  Shubhangi

• PhoneGap / app example Cordova not launching by BB10 Simulator

  I am launching a Phonegap "Hello World" example app in the Simulator BB10.

  As much as I fear, everything has been done correctly. The icon sets even on the home screen, but when I run it I get a black screen with the BB 10 logo in the background and it just hangs.

  See photo:

  I changed the 'project.properties' file in the project by adding the IP address of the Simulator and pointing to the SDK software WebWorks BB 10.

  I do not add the password BB 10 Simulator, because as far as I am concerned it is not a.

  I followed all the directions on Apache Cordova heredocumentation.

  Any help would be appreciated!

  Thanks in advance!

  OK, the problem is that I didn't use the default setting for the installation of the SDK. You MUST use the parameter by default when you install the SDK software to:

  / Developer/SDK/Research In Motion/BlackBerry 10 WebWorks SDK 1.0.4.5

• Geolocation on Simulator 9550 5.0.0.71 3, 9800 6.0.0.227 and the device with OS 6.0

  Hello

  I'm playing with a really simple WebWorks app that aims to get the geolocation of the user.

  The related javascript code is:

   // location related functions:
  function getLocation() {
      if (navigator.geolocation) {
          var options;
          navigator.geolocation.getCurrentPosition(geolocationSuccess, geolocationError, options);
      } else {
          alert("HTML5 geolocation is not supported.");
      }
  
  }
  
  function geolocationError(error) {
      alert("An unexpected error occurred [" + error.code + "]: " + error.message);
  }
  
  function geolocationSuccess(position) {
      //Extract information about the users current position:
      var time = position.timestamp;
      var coordinates = position.coords;
  
      //Retrieve geographic information about the GPS fix:
      var lat = coordinates.latitude;
      var lon = coordinates.longitude;
  
      displayLocation(lat, lon);
  }
  
  function displayLocation(latitude, longitude) {
  var message = "Your current location is ";
  document.getElementById("locationDisplay").innerHTML =
  message + "latitude: " + latitude + ", "
  + "longitude: " + longitude;
  }
  

  However, the geolocation features display location Simulator 9800 information 6.0.0.227 (I put location manually of "Simulator"-> "GPS Position") and device with os 6.0 (I did turn on Javascript and allow javascript support), but it works on Simulator 9550 5.0.0.71 3.

  I also find that my smart phone BlackBerry with os 6.0 browser cannot display some html5 (i.e.http://merged.ca/iphone/html5-geolocatio) demonstration sites location information

  All ideas

  I have a Storm 2 and a key

  They respond very differently to the GPS tracks

  I found sort of the problem as if you are in the open air or not

  My Storm 2 have no idea where I am if I sat inside my house

  My flashlight - gimme a sec - well - that failed too

  My Droid knows exactly where I am, my Nokia thinks I live 250 miles

  I think that we live in is too much running

  Go outside (with the exception of Nokia) and you are placed with precision

  Inside, we have strong signals from WiFi, compuer (s) and other things that stop at the GPS lock

  Today I went to my wife, it's a connection perfect area without radio - not even a chance to pick up WiFi-

  I took a taxi home - perfect connecton (maps is cool when you can tell the driver how fast he is dong )

  Last night I had a meeting with the boss - once again, perfect positioning

  The only thing that is different is that I'm not surrounded by radio parasite (all devices work on radio - WiFi, GPS, Bluetooth - you name it)

  Then...

  Just try it - walking down the street, turn over the cards, I'm positive you get a few feet away where you are

  Try the same thing with radio pullution (reception, WiFi, etc.) and the GPS can't find anything

  Believe me - work I am personal watercraft requires precise locations so it was annoying me as well

  At least I have the solution

  ---> Kudos - click!

• BB10 Simulator questions

  I'm testing BB10 on Mac and find the Simulator is very frustrating. I get various problems and I was wondering if someone could help in this regard.

  1. start Simulator and then it's only a black screen

  2 Simulator beginning and I can see the app. But lets say I'm in the settings app, I know not how to return to the home screen?

  3. application building and moved to the Simulator with success, but what I see is the journal of BlackBerry!

  Take a look at this site.

  https://developer.BlackBerry.com/DevZone/develop/Simulator/index.html

  1. all set up correctly.

  2. use sliding movements.

• Get on touch event BB10 Simulator

  IM studying BB10 Webworks. For exl I have this:

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  How can I get the event when I touch a div? It's ok when working with web by onclick but with Simulator, I do not know how to get the key events. Can someone help out me, tks so much

  Here is an example page that allows to understand how touch events:

  http://BlackBerry.github.IO/WebWorks-samples/kitchenSink/HTML/browser/touch.html

  On the BlackBerry 10 Simulator, you should expect to see the TouchStart, TouchMove events and touchstart SHOOTING when you interact with the content of the page with the mouse (Note: will also fire the click event).  Make sure that you are listening and managing events of button correctly.

• BB10 simulator: questions about the clock function

  I don't know, but I have the notion that under the Simulator for BB10 the clock() function returns a value of timer resolution of the host and not the right pair

  And since

  #define CLOCKS_PER_SEC 1000000

  during the conversion of the clock in seconds it will be least bad results under windows. Because Windows there

  #define CLOCKS_PER_SEC 1000

  I want to keep constant 60 FPS and I have a code like:

  const int FRAMES_PER_SECOND = 60;
  const int SKIP_TICKS = 1000 / FRAMES_PER_SECOND;

  int GetTickCount (void)
  {
  Return MathUtils::dti ((double) clock () / CLOCKS_PER_SEC);
  }

  and the game loop is:

  int t_prev = GetTickCount();

  mbGameRunning = true;
  While (mbGameRunning)
  {
  int t = GetTickCount();

  If ((t-t_prev) > SKIP_TICKS)
  Tick();

  Draw();

  EventLoop();

  t_prev = t;
  }

  Am I missing something?

  The clock() function only increments while your program is managed by the operating system. When the operating system switches to another task, "clock" your program stops running.

  You must use:

  clock_gettime(), which is the system clock that is still running.