Failure of the connection of MKS

Similar Questions

• "" My internet connection is constantly down and back on the error "negotiating IPsec year failure prevents the connection.

  Original title: The IPsec negotiation failure prevents the connection

  My internet connection is constantly visitor drop-off and restarted, and when I troubleshoot I get this message "the IPsec negotiation failure prevents the connection." I don't use VPN or anything so I have no idea what it means. I restarted the router several times. Any other ideas?

  Hello

  1. you are using a wired or a wireless connection?

  2. If it works well before?

  3 did you changes to the computer before the show?

  Method 1: Reset the router and see if that helps.

  Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  Method 2: Uninstall and reinstall the NIC drivers and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• VSphere client web - Remote Console error: unable to connect to the connection of mks (name of user and password) incorrect

  Hello

  I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment

  When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?

  Thank you

  solved by adding the ip address of my ESXI in my macs hosts file

• Load Balancing configuration failed with the failure of the connection shared after 11.1.2.2 11.1.2.3 upgrade

  Hello

  We have our EMP system had put 11.1.2.2 to 11.1.2.3 and it's a broadcast environment (Windows 2008 Server) and in one of the server, we installed FDM and after 11.1.2.2 upgrade to 11.1.2.3.

  When we load balance FDM Configuration, SSP is failed with " Shared Services Connection Failed '

  What I did:

  Deleted all entries in the object load balancing DCOM {E652643D...} and the Application Server Config {26AD6592..} and the COMJNIBridge DCOM objects. Re-directed EMP config for FDM application server

  and reconfigured the FDM with mycmsc\svc_hyperionfdm of the user application server. Config of load balancing is still unable to the connection of Shared Services with the error "Shared Services cannot connect".

  I tried the local administrator user but fails in the same way

  Windows system log entries:

  The application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} server application and the APPID

  {E652643D-6CC1-48AC-915D-01842B04F292} the user NT AUTHORITY\SYSTEM SID (S-1-5-1 of the address LocalHost (using LRPC).

  This security permission can be modified using the Component Services administrative tool.

  Windows Application log entries:

  Recovery of the class factory COM for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.

  COMJNIBridegWrapper.log entries

  08/07/2014 10:42:06: unknown COMException error

  at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall (Object o, Type objType, String name, Object [] args, paramnames, CopyBack [] Boolean String, Boolean IgnoreReturn) at

  Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall (Object Instance, Type, Type, String MemberName, Object [] Arguments, String [] ArgumentNames, TypeArguments, Boolean] [] Type

  CopyBack, Boolean IgnoreReturn) at Hyperion.Fdm.Api.Common.Security.Authentication.AuthenticateUser (String userName, String password, the domain, String String & ssoToken)

  Hello

  Finally, we could solve this problem. Thank you for all your help.

  Kind regards

  VJ

• IM stops working after a minute or two - troubleshooting explains internet connection problems found (the IPsec negotiation failure prevents the connection)

  Need to patch to get IPsec to start working in Internet instant Mesasenger - I fought this for about 3 months. I can't do a Messenger call for more than a minute before having to re - connect - it's driving me crazy - fix your product - Paul * address email is removed from the privacy *.  Settings information (network security) Diagnostics that can block connections:

  filter name: Messaging microsoft instant - name for the provider context: windows Instant Messenger - provider name: Microsoft Corp.Provider - description: Microsoft Windows Firewall: IPsec provider

  Hi paulrhea,
   
  -What version of the operating system are you using?
  -You are able to go online with no problems?
  -Have you been able to use the Messenger without any problem before?
   
  If you use Windows 7 or Windows Vista, follow the suggestion given here.
   
  Try to disable the firewall for the moment and check if it helps fix the problem.
   

  If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Note: Firewall can keep the computer worm, pirates etc. Therefore, be sure to turn on the firewall once you are finished with the test.

  If it is Windows Firewall, see the article below:

  Allow a program to communicate through Windows Firewall

  Additional reference on:

  Windows Firewall is blocking a program

• hard drive corrupted after the failure of the connection?

  I have the problem that the usb device is not recognized, sometimes my devices are recognized s, sometimes not, but don't I have, I have connected my external hardrive, it was not recognized, I turned it off and on again, I thought that if I restart my pc it could solve the problem, I've done, but because windows does not start if I have the hard drive connected at first I turned it off again. When I plugged it again after the reboot, it went well.

  but then I got an alert Bublé saying something like windows has delayed the process of drafting or smth on the hard drive and data are lost.

  I opened the folder on the hard drive and tried to play sth, it was corrupted txt files went EVERYTHING was corrupt or gone!

  Why THE FREAKING windows access _ and write or erase or change my bloody files if I don't even have to open the folder bloocy? It was not yet known for the love of christ. Why in gods name has destroyed windows all my 346 GB of files? This id do not have a copy.

  that the _ happens there? Windows, wrote that I'm not saying that he would do something.

  any help would be apreciatedm that I just want to know why windows destroyed all my stuff to avoid it in the future.

  p.s iam sorry for the language but it is so frustrating, I really start to hate windows, I think iam going to switch to linux.

  
  

  Edit: the data is not corrupted, thank God, I rebooted and it worked but after a certain time windows new belives it is corrupt, no idea why that is?

  and another thing, the problem with this usb devices are not recognized, what causes this error?

  I have windows xp sp3

  I think you may have a hardware problem. You can try to update the drivers of the computer (including the chipset or motherboard) and see if the problem clears. If this isn't the case, you may need to update the bios of the computer. If all fails, you will need to replace the motherboard on this PC. Since he is a big part, I suggest you buy a new computer, or get it fixed if it is still under warranty.

  Best,

• Black screen after the failure of the connection - win 10 win7 installation

  Hello

  SYSTEM ERROR
  Cause
  I tried to install win10 on a PC running win7. Installation stalled at 99% and I restarted.
  The problem
  Now he still run win7, but once connected, the screen is completely black except for cursor. Features such as the job-work list as it should and in safe mode, the screen is not black after login.

  PC INFORMATION
  The video card
  My video card is "Mobile Intel (R) 4 Series Express Chipset Family" (driver version: 8.15.10.2202) Driver date: 25/08/2010) and windows tells me that the video card (graphics - in my language) is updated to the latest version.
  The model
  ASUS Pro79I Series. With Windows 7 64 bit

  Mathias, cordially

  Denmark

  Hi Mathias,.

  According to the description of the issue you do not get black screen after login in safe mode. For example, there might be a chance that the display driver is either corrupted or need a update. Please, try the steps to uninstall graphics card in Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the graphics card from the Web site of the manufacturer (ASUS)

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I can't install the qualys browser control module, it says can not be downloaded due to the failure of the connection to the site of qualys, worked on Firefox safe

  add it on installs fine on Chrome and IE, I can run their web site interface browser check

  Hi strater.
  Please upgrade to the current version of Firefox, version 36. I tried https://browsercheck.qualys.com/ and it seems to install. However, any plugin that is not digitized may be vulnerable.

• A big problem with the connection pleaaaasssse help me

  Hi all

  yesterday everything worked fine

  I wanted to migrate hosts of virtual switch to vds

  Now, nothing works

  The problem is the esxi how nsx is.

  failure of the connection with this host

  When I want to configure the IP settings with command line, I can not configure the gateway, the error is that the network is unreachable.

  so I can't connect to the vcsa

  I created a new switch, but I have the same error

  Please help me. is the work of my thesis, and the date limit is close

  Thank you

  Thank you for all

  I deleted esxi nsx and restoration

• the connection failed

  Hello

  I have a new mac, I try to run a more soft adobe but the same message is displayed continuously:

  «the failure of the connection, this ID has already been used pour activate the software on two computers...» »

  I use it on another computer, but I disabled it for a 3rd.

  So I have to use it but by impossible...

  someone already had this problem?

  Thank you

  read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Cannot load a user profile... erreo "the failure of the service USER PROFILE SERVICE to connect.

  Hello

  not able to load my 1st admin. The user's profile, every time I try to load the message appears "the failure of the service USER PROFILE SERVICE to open a session. I tried some of those ways, but nothing happens. Please help me with this problem...

  1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step
  2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17
  3. If you are able to connect, once the command prompt appears, type: net user administrator Word of past / active: Yes (you can specify the password for the administrator account.)
  4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r
  5. start again by pressing F8, but this time choose just the SafeMode.
  6. you will be able to log in as administrator with the password set in step 3
  7 hit (windows logo) + r.
  8. type regedit
  9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15
  11 right-click and click Rename, and then change it. TO BAK. BK
  12 right-click with the same numbering but without the. BAK and Add. BAK add at the end
  13. right click on the one that you have renamed in BK and clickRename, remove the. BK
  14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.
  15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data
  16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.
  17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer
  18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.
  19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 23
  20. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.
  21. press F12 until you see a menu of boot options, choose boot from CD
  22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.
  23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)
  24. close the command prompt and click on restart and go to step 5 "

  Here's a Fixit for cause of you, so that you don't have to do it yourself:

  http://support.Microsoft.com/kb/947215

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Failure of the USB2 connections

  I have a Hitachi 250 GB hard drive and a keyboard wireless mouse. I had to move connections USB2 from the monitor to the computer case due to the failure of the USB2 connections on the monitor. The keyboard and mouse don't work, but the hard drive is not detected in windows Explorer. It is detectable by using Device Manager where it says the device is working correctly, but I can't access it. Good thing, I don't have a lot of hair out.

  In the device under Bus USB locate controllers your hard disk manager, right click-> Uninstall, then restart your computer.

  Or
  Try it on a different computer if the symptoms are the same, it could be a bad cable, try a different cable or it could be a faulty hard drive enclosure.

• How to manage the connection failure of network at the service of bussiness on OSB

  Hello everyone.
  
  Thank you for your attentions. I need help with the error handling in the OSB 11 g. I have a proxy that road to a business service to check the status of the service profile. I use the java client to use the proxy service and return the results to clients. The problem that I am facing manipulation is failure of the network connection.
  
  I want to get some message (or any useful information) of proxy service to indicate that the connection to the business service is not available when the connection fails. I tried to add the management of errors, but I can't found the action from the list of options.
  
  Can you review my proxy service and tell me some resolutions?
  Any suggestion is appreciated.
  
  I thank in advance
  

  <?xml version="1.0" encoding="UTF-8"?>
  <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
    <ser:coreEntry isProxy="true" isEnabled="true">
      <ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
        <con5:wsdl ref="Test/resources/wsdl/PortalSide"/>
        <con5:port>
          <con5:name>PortalSideSOAP</con5:name>
          <con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
        </con5:port>
        <con5:selector type="SOAP body"/>
        <con5:WSI-compliant>false</con5:WSI-compliant>
      </ser:binding>
      <ser:monitoring isEnabled="false">
        <ser:aggregationInterval>10</ser:aggregationInterval>
        <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
      </ser:monitoring>
      <ser:reporting>true</ser:reporting>
      <ser:logging isEnabled="true">
        <ser:logLevel>debug</ser:logLevel>
      </ser:logging>
      <ser:sla-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:sla-alerting>
      <ser:pipeline-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:pipeline-alerting>
      <ser:ws-policy>
        <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
      </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
      <tran:provider-id>http</tran:provider-id>
      <tran:inbound>true</tran:inbound>
      <tran:URI>
        <env:value>/Test/proxy-services/DnICT_WSDL_PS</env:value>
      </tran:URI>
      <tran:inbound-properties/>
      <tran:all-headers>false</tran:all-headers>
      <tran:provider-specific>
        <http:inbound-properties/>
      </tran:provider-specific>
    </ser:endpointConfig>
    <ser:router>
      <con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
        <con:stage name="InputProcess_stage">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
          </con:context>
          <con:actions>
            <con1:assign varName="docId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="depId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="srvId">
              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
          </con:actions>
        </con:stage>
      </con:pipeline>
      <con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response">
        <con:stage name="ErrorHandling">
          <con:context/>
          <con:actions/>
        </con:stage>
      </con:pipeline>
      <con:flow>
        <con:pipeline-node name="GetRequestInfo_pipeline_pair">
          <con:comment>Lay cac thong tin trong form search</con:comment>
          <con:request>GetRequestInfo_pipeline_pair_request</con:request>
          <con:response>GetRequestInfo_pipeline_pair_response</con:response>
        </con:pipeline-node>
        <con:branch-node type="condition" name="branching_public_services">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
          </con:context>
          <con:branch-table variable="depId">
            <con:branch name="SoTTTT">
              <con:operator>equals</con:operator>
              <con:value>1</con:value>
              <con:flow>
                <con:branch-node type="condition" name="DnICT_dept_services">
                  <con:context/>
                  <con:branch-table variable="srvId">
                    <con:branch name="DichVu_1">
                      <con:operator>equals</con:operator>
                      <con:value>1</con:value>
                      <con:flow>
                        <con:route-node name="RouteToDnICT_BS">
                          <con:context>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
                            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
                          </con:context>
                          <con:actions>
                            <con3:route>
                              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
                              <con3:service ref="Test/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
                              <con3:operation>selecttrangthai</con3:operation>
                              <con3:outboundTransform>
                                <con1:assign varName="username">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('stttt')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:assign varName="password">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('123456')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:replace contents-only="true" varName="body">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText><![CDATA[<soap:selecttrangthai       xmlns:soap="http://soapinterop.org/">
       <username       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
       <password       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
       <masohoso       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
  </soap:selecttrangthai>]]></con2:xqueryText>
                                  </con1:expr>
                                </con1:replace>
                              </con3:outboundTransform>
                              <con3:responseTransform/>
                            </con3:route>
                          </con:actions>
                        </con:route-node>
                      </con:flow>
                    </con:branch>
                    <con:default-branch>
                      <con:flow/>
                    </con:default-branch>
                  </con:branch-table>
                </con:branch-node>
              </con:flow>
            </con:branch>
            <con:branch name="SoGTVT">
              <con:operator>equals</con:operator>
              <con:value>2</con:value>
              <con:flow/>
            </con:branch>
            <con:default-branch>
              <con:flow/>
            </con:default-branch>
          </con:branch-table>
        </con:branch-node>
      </con:flow>
    </ser:router>
  </xml-fragment>

  P/S:
  
  When the connection to the business service is failure, I received this SOAP message:

  <soapenv:Envelope       xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
       <soapenv:Body>
       <soapenv:Fault>
       <faultcode>soapenv:Server</faultcode>
       <faultstring>BEA-380002: No route to host</faultstring>
       <detail>
       <con:fault       xmlns:con="http://www.bea.com/wli/sb/context">
       <con:errorCode>BEA-380002</con:errorCode>
       <con:reason>No route to host</con:reason>
       <con:location>
       <con:node>RouteToDnICT_BS</con:node>
       <con:path>request-pipeline</con:path>
       </con:location>
       </con:fault>
       </detail>
       </soapenv:Fault>
       </soapenv:Body>
       </soapenv:Envelope>

  Kind regards.
  CUONG Pham
  
  Published by: Doubt_Man on July 28, 2011 10:26

  You can add an error on the route action handler in your proxy service.

  you could investigate the $fault variable and check example what errorcode BEA... comes back.
  Then, you can decide what to answer in return... for example, create your own SOAP-fault and set your own messages.

  now the default $fault value generated by the OSB will be get back

  http://www.xenta.nl/Blog/2010/07/17/Oracle-service-bus-11g-handling-SOAP-faults/
  Maybe we can help you a bit

• Failure of the user after windows update connection service 8

  My system went to the failure of the auto repair. I refreshed windows 8, but could not access the c drive. When I try to connect to the system

  It says 'service User brightness Service failed sign-in. User profile cannot be loaded.

  Kindly help me.

  Thank you

  Anitha

  Hello.

  I think that by performing the steps mentioned in the link I have provided below will solve the problem.

  There you go: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C566845&...

  Kind regards

  Charu

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.