Failure of the scanner 6280 - tension and try to scan the image
How many times should I proceed in order to stop to tell me the same message?
He started all of a sudden and now I have no idea what to do... people of ideas? I hope that this is not something stupid, I... Thanks in advance for any guidance!
G
Certainly a hardware will need the service problem. We could go further in troubleshooting it down to the likely component which failed however, when they "fix" these scanners, they just put a brand new, they do not replace individual parts. Check the scanner to see if she is just a cable that plugs into the body of the printer or if the cable actually in the printer without a clip you can cancel to separate the two. If you can separate the two - check the list of e-bay/craig etc. you might find one where the printer part is toast for really cheap. As long as this isn't the controller card for the scanner that is installed in the printer that failed!
Tags: HP Printers
Similar Questions
-
Three large printers including said Vista image
#77458900 is of poor quality and do not use. I tried anyway and they deserve it so bad pixalated and was totally unusable. How can I request a refund?
Hi Joy,.
I am a member of the Adobe Stock Quality Engineering team, can you tell me how you download this file and what program you use to view? I will gladly give you a credit for the image, but I could use your help with these issues.
EBQ
-
Equium A60 screen failure, but the image is always visible
Bought this laptop because it was supposed to be reliable. After 18 VERY basic use the screen started to black intermittently until 3 months ago, it failed completely. I now use an external flat screen (which was 4 years old! no problem).
Now, I noticed that there is always a visible image on the screen of the A60. I was told that the backlight may need to be replaced or I read that perhaps the FL inverter? must be replaced.
Can anyone suggest how to overcome this problem especially since I said a replacement screen may be as much as a new laptop. PS one of the buttons also has failed never happened before on any keyboard from the computer when it came out.Any help welcome. Davee
Yes, you suggestion isn't bad. It would really be a FL. inverter error This small part is not very expensive and can be responsible for your problem.
But I think that you should replace this part yourself t. I think that you have no much experience in this replacement and so you should ask the technician for assistance. -
Display success or failure of the images only in the user interface custom
I built a user interface customized to my project VBAI 2010 that displays 2 images from 2 different cameras. I want to have the "View menu" available for an operator to choose between images, only passed, only having failed, etc. The view menu is using the default user interface, but when I build a custom one from one of the templates, this option is no longer available. How can I get the view menu to show up? If I can't do it, is there a good work around for this?
This is the VI amended with an additional option for any display puts is not up to date.
If you do advanced UIS Custom like this, you should definitely check out LabVIEW. You can even install it for evaluation to try... later, when you're not on the customer site
Hope this helps,
Brad
-
Failure of the image due to the 'partition reserved
Below the line continues is a solution posted in 2010, but given my situation I can proceed with this solution? This technuique seems to work, but what happens if the "reserved" partition is already 450MO & the error so that it occurs. In fact this happened to me. I first encounted error 0 x 80780119. I followed this procedure & repeated the backup. The backup failed then an error different 0x8079012D on a bad sector. Then, I scanned both my hard drives internal & external & applied the FIXES everything that was found. As a result, I repeated then backup & the original error returned. Scanning the partition "reserved" via "Disk Manager" the partition which went from 100 MB to 450 MB now has 20 MB of free space. If this partition has completed over the successive failures of backup.
Is it SAFE to extend this partition more away? I keep seeing statements not exceed the 500 MB?
_________________________________________________________________________________________________________________________________
Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.
Note: Backup of your hard drive as described in the article.
How to fix error code: 0 x 81000033
http://www.PAGESTART.com/win7br0x8100003301.htmlHi Jeff,
Although I have not tried myself, I don't see the problem to the expansion of the space in question. In fact most of the threads I've read point to extend the drive.
For clarification, I would advise to post using the link below:
http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads
hope this helps,
B Eddie
-
scan multiple images again and I don't want that he
Hello
I have a HP Photosmart 7525. I use the Mac OS X 10.6.8 version. I'm analyzing my grandmother's recipes. On some of the TI keep break them into multiple images. How can I disable this feature. I'm just a complete picture of each recipe when I scan one at a time.
Thank you
Sean
Hi Sean,.
Please follow the steps below to resolve the problem described:
1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none or A4.
7. click OK and try to scan the image.Kind regards
Shlomi -
I'm trying to scan a picture 8 x 11, but I get only 4 x 6 portions of the image.
I'm trying to scan a picture 8 x 11, but I get only 4 x 6 portions of the image.
I'm on OS 10.7.3 and a B210 printer
Hello
It seems that the default scanning workflows configured to crop the image to its default settings.First, install the critical update below:
http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmgNow change the settings of the device as follows:
1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none.
7. click OK and try to scan the image.Please let me know of any changes,
Shlomi -
This is a photo 8 x 10 and no matter what I do, only a quarter of it appears on my computer. I am incredibly stupid feeling right now and don't know what to do to solve this problem. Any advice? Thank you!
Hello
The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none.
7. click OK and try to scan.Kind regards
Shlomi -
I upgraded to 10 Windows on a laptop ASUS, then updated the software for a HP Officejet 6500 E709n Series printer HP solutions Center.
I can print successfully to the printer but when I open the solution Center and then try to scan an image or a Document, I get the following error "Scan cannot be performed because another program or computer using the networked imaging device.
Extended error information is 8, [(0.18,-2147467259)]
When I look in device under imaging devices Manager, two devices are displayed ASUS USB2.0 WebCam (1) and (2) Officejet 6500 E709n.
It would be much appreciated if someone could help me solve this problem.
Hi midnight-anwrs,.
Thanks for getting back to me.
I looked into your link "Printer problems after upgrade to Windows 10" and 6 "Scan with a scanning application" stage, I found the solution.
I downloaded the "HP Scan and capture App" and can now easily scan photos and documents.
Thanks for your help.
Much appreciated,
KenRabs
-
Original title: Windows Fax & Scan
Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.
The error that says:
No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.
the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.
What can I do?
Daniel Capelle
The scanner came with a CD to install the software? Some more recent does not come with a CD, you must go to the Canon Website and you get the software.
-
Adobe Extension man Ager C SS 5.0 UPDA te
Ther . e very year error download this UPD ate Please which t and try again later. Error Code: U43M l D207
F ireworks CSS 11.0. 2 U p dat e
Ther . e very year error download this UPD ate Please which t and try again later. Error code : U43M l D207
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager
I read a few posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
can someone please help?
Hello
Restart the system and try again.
You can also check out the link below.
Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5
I hope this helps.
Kind regards
Vivet
-
I have a HP 6210, when I try to scan or copy I get a "scanner failure".
I have a HP 6210 for a few years now. I did a lot of work with all its functions. But now I can not copy or scan anything. The message is always "scanner failure".
I tried with different OS but nothing works.
Is this the end of his days?
And the strange thing is that this happens only when I try to scan from the plateau.
Charger scanner works perfectly!
But I need to analyze both the fotos!
It seems that the scanner mechanism which is integrated in the glass flat has developed a hardware problem. Please see the document located here for the procedure resolve a scan failure.
-
I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.
I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.
There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.
Hey AmnonMikeCohen,
Thank you for being a part of the communities of Apple Support.
I understand that your Mac is not start properly after the power went out. Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:
Reset the management system (SCM) controller on your Mac.
How to reset the NVRAM on your Mac.
See you soon.
-
Failure of the update of the virus definitions and spyware
My machine will not update the definitions of viruses and spyware. It maintains error 0 x 80070424 report.
I get this error reported:
Failure of the update of the virus definitions and spyware
Security Essentials might not check for viruses and software spies definition updates following a network connectivity problem or the internet.
Security Essentials could not install the definition due to updates
Hi GlennRogers,Here are a few articles related to this topic. Try the suggestion given in the statutes for this problem:Here's a direct link to troubleshooting automated for this question:
Maybe you are looking for
-
Why my Firefox suddenly become a blue light &; see through @ top?
I just migrated from Win XP to Win 7 and my Firefox and Thunderbird are now a light blue color, and Firefox is see through top. I wish I could change the color. This light blue/white is hard to watch. I use FireFox worm. 30 & Thunderrbird worm 24.6.0
-
Should you keep bluetooth on transfer work?
I finally got discount to (sorta) work for my iPhone 6 s and my MacBook Air. What should I keep Bluetooth on for that it works, or can I disable?
-
How to label the columns in excel
I need to know what code to use in labview to label columns in excellent when data are open up in excel. Thank you
-
I downloaded Skype as the Herald of the 'new '. Now I can not find any games, I used to love. I really want Solitaire Showdown back! I loved playing this game with my daughter online. How can I get that back? After downloading Skype, it has not
-
API Mastering Image v2.0 for Windows XP Home Edition Version 2002 served Pack 2
How do we install API Mastering Image v2.0 for Windows XP Home Edition Version 2002 Servie Pack 2?