Failure setting

Similar Questions

• Is no longer able to install windows updates after factory reset (windows service exception / failure set up the updates of windows roll back)

  So suddenly, I wanted to start my 3 month old laptop, but found that it was getting a system service exception.

  After hours of troubleshooting, I decided to go with a clean installed, this has completely fine until I installed the updates of windows (I have to install these updates to return Windows 8.1)

  After you install all the following updates occurs after a reboot:

  -Default configuration of the windows updates, roll back later, I get a system service exception.

  - Or directly a system service exception.

  These problems are solveable by a system restore to a point that has no updates.

  The next thing I could try is install the updates of windows 1 by 1 to see the update is causing this particular problem.

  If anyone has a way to solve this problem please help.

  The following link is a dxdiag to my machine:

  http://pastebin.com/Bfmxive7

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

• Write a report on termination

  Dear all,

  I put the option 'end run' on my postaction 'on the failure of step", but even if the execution is completed successfully, TestStand does not generate the report. I'd like to see what tests were run before executing the step has ended, I also whant to understand what criteria is the culprit of the termination. It seems that the process template does not work as I am in aspect, where do you think I look to see if it works correctly?

  Thank you in advance!

  I have created a numerical limit with no adapter step, set up his failure, set post - Fail Terminate action and he ran Single Pass with the default configuration of treatment result

  ---> It generates a report with 'done' in the header.

  It is the default behavior, that I expected.

  Maybe you changed something else which causes a different result?

• HP Pavilion DV6-6110us: dead computer - CPU problem?

  This computer is a HP Pavilion DV6 that no longer works.  The caps lock flashes and the wireless light turns orange.

  The 'professional' consultation, we said that the video processor was not seated properly on the motherboard and that they could try a sort of re-flow by the firing chamber and replace the video to see CPU, moment of dismantling, there is no piece where it is supposed to be (must be somewhere else).

  In addition, after searching for flashing caps on the web lock, I discovered that there are several indicators which transmits this signal, and after reviewing the table, it seems that the boss of flashing light indicates that the cpu has failed.

  So, at this point, I plan to replace the cpu. Any ideas on what are the best and/or most affordable options? Also is there advice and / or tricks I should know when you perform this repair?

  Thanks for any help that anyone can provide.

  The diagnosis following your fake is... It is a sign of chess chess not CPU GPU. Most users think that it is the CPU and it is not. Your video Chipset has failed, and unless you get this replaced chipset or buy a replacement with the failure of video chipset motherboard fixed replacement CPU will not fix your problem. It is a GPU failure and looking for your system has AMD GPU and very probably, it was not and must be replaced. Of course they are not professional if they do not notice that there no video chipset. Video HD Intel and Intel CPU rarely fail why because if that were the case you would hear of such failures, news bulletins, but you do not have. Options at the moment are

  1. replace the Board of directors by Council renovated with chipset failure set

  2. sell your system and get a better system that does not breakdown video chipset

• Problem starting my desktop computer

  Hello

  I would appreciate if you could help me on this.

  A few days ago I took my uncle s old Acer Aspire T180 upgrade. It did come with a hard drive, but I got an old Toshiba hard drive which I plugged it in to see if it works.

  (Card: 512 MB of RAM, AMD Athlon)

  Problem 1) is where the problems began to occur. Startup Repair has not solved the problem. I tried to use the system repair and restore backup options, memory diagnose or Toshiba HDD repair and other options failed.

  I thought that it was the hard drive, so I ordered a new hard drive Toshiba from Dell.

  Problem 2) after installing the new hard drive, it says «verifying DMI pool...» Disk boot failure. "

  After searching online, he leads me to the next solution I need to reinstall Windows 7.

  Problem 3) I found the product key on the side of the desktop "Windows xp media Center 2005" and I tried to get on Microsoft, but it was rejected.

  Then I found a download link for "Windows xp media Center 2005" I thought was an OS like windows 7 and downloaded on a usb key.

  Problem 4) using the. ISO file, I tried to boot to the desktop through F12, however, the system is stuck on the message «verifying DMI pool...» »

  These are the problems I have encountered, and try to counteract the problems led me to the other issue.

  Please help me.

  Thank you

  Salman

  PS. I don't have the disc of windows 7 or any other disc that came with the desktop computer.

  And my product key does not work.

  Hello

  The most common cause of this error is an incorrect order of boot devices in BIOS. Or the HARD disk is damaged. A hard drive may become inaccessible due to read/write errors, failures or damage of virus attacks. What I can suggest is for you to follow the instructions given by Greg Carmack via this link.

  This should help get your query with «verifying DMI pool...» Disk boot failure"set.

  Let us know how it goes.

• Guest account cannot login and cannot connect to the service of sense

  I'm usually the only one who uses my computer, but recently a friend wanted to use so I set up an account invited - or tried!  Everything seemed normal until she went to open a session and he said that she could connect to the service sense?  and contact the administrator.  I don't have any idea of what it is or means only that the acct of comments are not accessible.  I am tired of looking in Help and support, and then nothing.  I appreciate any help anyone could give me.

  
  
  Thank you
  Linda

  OK, try the steps below:

  1 - Login to your account

  2 - Win Key + R to open Run

  3 - Type services.msc and press enter

  4 - find "System Event Notification Service" and double-click it.

  5. now in front of Startup type , see it is set to Auto or select "Auto".

  6. now go to ' theRecovery tab' in front of 'first failure' 'set'restart the Serviceand verify that this is the same in Second Doctor too. Do not touch "subsequent failures."

  7 - click on "Ok" and reboot your PC.

  I hope this help you.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Quiz, 'Last attempt' action does not

  In my project, the user has to choose to create a branch and follow the course or take a branch of the advancement of knowledge. If they choose to take the race management, questions are interspersed throughout the content after the content tested for. They are not classified on the quiz. Most of the questions is configured to allow 1 or 2 attempts. Quiz slides are defined in advance just to the next slide contained before.
  If they choose the branch of the advancement of knowledge, he takes them directly to the first question. If they answer correctly, they continue to the next question. When they answer correctly, they must be picked up at the beginning of the content of this section.

  I have the action of 'Success' configured to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (success goes to the next question). This part does not work properly.

  'Failure levels' are set to 1. For the "last attempt" I also put it to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (failure dates back at the beginning of the content for that matter). This part does not work properly. The project is not navigate to content in case of failure. My quiz is noted, but none of the questions are awarded points (they should be able to answer questions twice, but are able to continue even if they are not properly the second time).

  In Quiz preferences, I "branch of consciousness" checked and 'Allow the movement to the rear', in the region of success or failure, the user doesn't have an attempt to take the quiz. "

  On the question slide, I have "Attempts" value 2 and 'Levels of failure', set to 1. I tried different things in the 'last attempt' fall down and none have worked. The right question slide moves to the next slide and does not take into account what I put in unrolling the last attempt.
  Is there anything else I can check or change to ensure that it works properly?

  Thanks in advance for your suggestions.

  

  I'm done with two copies of each slide in the question.  One at the beginning of the content and the other at the end.  If the user gets the first incorrect answer, they just continue with the content and taking up the same issue (a different slide number) at the end.  For some reason, Captivate didn't work well, go backward.  This double solution the number of question slides in my project, but so far I don't have a big project.  Do not forward to the next project, which has already obtained up to 111 slides, with about 30 more to go finishing.  Because of what I do, my post must be an exe file.

• ADF is to give dfw_config.xml FileNotFoundException in Weblogic 10.3.4

  Hello
  
  I'm newbie FAD and this forum too, after the deployment of my ADFApp.ear file in Weblogic Server 10.3.4 I get the following error:
  
  July 25, 2011 02:32:59 oracle.core.ojdl.logging.LogUtil Journal
  WARNING: Loading failure setting diagnostic configuration file /middleware_root/SampleDomain/config/fmwconfig/servers/myserver/dfw_config.xml; the default configuration will be used.
  java.io.FileNotFoundException: /middleware_root/SampleDomain/config/fmwconfig/servers/myserver/dfw_config.xml (no such file or directory) at java.io.FileInputStream.open (Native Method)
  at java.io.FileInputStream. < init > (FileInputStream.java:106)
  to oracle.dfw.spi.portable.PortableDiagnosticsFrameworkProvider$ 2.run(PortableDiagnosticsFrameworkProvider.java:277)
  to oracle.dfw.spi.portable.PortableDiagnosticsFrameworkProvider$ 2.run(PortableDiagnosticsFrameworkProvider.java:273)
  
  I also checked the folder structure and did not find the folder "fmwconfig" in my config directory. Can you please let me know do we need to require the structure of the folder "fmwconfig".
  
  Please let me know if I'm missing something, this will help me to debug the problem.
  
  Thank you
  Srini

  Srini,

  ADF requires the JRF option in the area.

  As I said earlier in this post, the analytical framework configuration file seems to be optional in all cases (the message is just a warning after all).

  However, as the ADF guess JRF and specifying the JRF seems create the file required for the diagnostic framework structure, it's sort of a moot issue.

  John

• Sporadic bug?

  I see this pop up after about 4 tries of debugging when working on my video recording applications:

  I use the new lccs_Playbackfix.swc and the flex 4.1.  Right now, my goal is to create a Visual indicator for whether or not the current video is saved.  I don't think that this error has a direct relationship with what I do with the Image shows the State of the record.  Just thought this might help you guys out, or maybe just me.

  Kills Apr 26 12:14:44 GMT - 0500 2011 LCCS SDK Version: 1.4.0 Player Version: WIN 10,1,85,3

  12:14:44 GMT - 0500 requestInfo https://na2.collaboration.adobelivecycle.com/twvending/videochat?mode=xml & glt = g: & x = 0.36452 626436948776

  12:14:44 GMT - 0500 authentication status: 200

  12:14:44 GMT - 0500 complete authentication request

  12:14:44 GMT - 0500 requestInfo is https://na2.collaboration.adobelivecycle.com/twvending/VideoChat?GAK=cmVuZ2EqbmExcioxMmY5M mNlNTExNio1NTE1QTIyWTNONjFRQVBYQUY1VzRERVM3MA & mode = x & xml = 0.608354658819735

  12:14:45 GMT - 0500 #TicketService # received ticket: v48ixl3z5v4v

  12:14:45 GMT - 0500 get FMS to https://na2.collaboration.adobelivecycle.com/FMS?ticket=v48ixl3z5v4v & proto = RTMFP attempt n ° 1/3

  12:14:45 GMT - 0500 result: fms >

  fms6.Acrobat.com < source > < / original >

  rtmfp:1935, rtmps:443 < proto_ports > < / proto_ports >

  < retry_attempts > 2 < / retry_attempts >

  < / fms >

  12:14:45 GMT - 0500 protocols: [object ProtocolPortPair] [object ProtocolPortPair]

  12:14:45 GMT - 0500 [attempt 2 1] connection to 0/1: rtmfp://fms6.acrobat.com/cocomo/na2-sdk-e80bc473-6f16-41ac-adcb-67e01950cd72/videochat #startProtosConnect #.

  12:14:45 GMT - 0500 tempNetStatusHandler 0/2,NetConnection.Connect.Success

  12:14:45 GMT - 0500 isTunneling? fake

  12:14:45 GMT - 0500 use RTMPS? fake

  12:14:45 GMT - 0500 RECEIVED TO CONNECT TO THE SESSION

  12:14:45 GMT - 0500 .user descriptor of the [object] Server

  12:14:45 GMT - 0500.

  12:14:45 GMT - 0500 .userID [string] = WCD-752960CA4D63BEF00A746C1A/2

  12:14:45 GMT - 0500 .role [number] = 100

  12:14:45 GMT - 0500 .affiliation [number] = 100

  12:14:45 GMT - 0500 p:System.NET.mail.MailAddress.DisplayName [string] = Eric Blom 2

  12:14:46 GMT - 0500 RECEIVENODES UserManager

  12:14:46 GMT - 0500 receiveAllSynchData UserManager

  12:14:46 GMT - 0500 RECEIVENODES FileManager

  12:14:46 GMT - 0500 receiveAllSynchData FileManager

  12:14:46 GMT - 0500 checkManagerSync: [object FileManager]

  12:14:46 GMT - 0500 RECEIVENODES AVManager

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at com.adobe.rtc.sharedManagers::StreamManager/onItemReceive() [/ users/arun/work/aponnusa_the oden.corp.adobe.com_1666/main/connect/cocomoPlayer10/src/com/adobe/rtc/sharedManagers/Stre amManager.as:1786]

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at com.adobe.rtc.sharedModel::CollectionNode/ () http://www.adobe.com/2006/connect/cocomo/messaging/internal:receiveItem [/ users/arun/Wor k/aponnusa_theoden.corp.adobe.com_1666/main/connect/cocomoPlayer10/src/com/adobe/rtc/share dModel / CollectionNode.as:777]

  at com.adobe.rtc.messaging.manager::MessageManager/ () http://www.adobe.com/2006/connect/cocomo/messaging/internal:receiveItem [/ users/arun/Wor k/aponnusa_theoden.corp.adobe.com_1666/main/connect/cocomoPlayer10/src/com/adobe/rtc/messa ging/manager/MessageManager.as:718]

  at com.adobe.rtc.messaging.manager::MessageManager/ () http://www.adobe.com/2006/connect/cocomo/messaging/internal:receiveItems [/ users/arun/Wo rk/aponnusa_theoden.corp.adobe.com_1666/main/connect/cocomoPlayer10/src/com/adobe/rtc/mess aging/manager/MessageManager.as:593]

  at com.adobe.rtc.session.managers::SessionManagerBase/receiveItems() [/ users/arun/work/aponnu sa_theoden.corp.adobe.com_1666/main/connect/cocomoPlayer10/src/com/adobe/rtc/session/manag ers / SessionManagerBase.as:456]

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" 
                 xmlns:s="library://ns.adobe.com/flex/spark" 
                 xmlns:mx="library://ns.adobe.com/flex/mx"
                 xmlns:rtc="http://ns.adobe.com/rtc"
                 width="100%" height="100%" currentState="logon" applicationComplete="loadComplete()" >
      <s:layout>
          <s:VerticalLayout paddingBottom="6" paddingLeft="6" paddingRight="6" paddingTop="6" />
      </s:layout>
      <s:states>
          <s:State name="default" />
          <s:State name="logon" />
      </s:states>
      
      <fx:Script>
          <![CDATA[
              import com.adobe.rtc.archive.ArchiveManager;
              import com.adobe.rtc.events.SessionEvent;
              import com.adobe.rtc.session.managers.SessionManagerPlayback;
              
              import flash.external.ExternalInterface;
              import flash.utils.Timer;
              
              import mx.core.Application;
              import mx.core.FlexGlobals;
              import mx.events.FlexEvent;
              import mx.utils.Base64Encoder;
              
              [Bindable] var roomURL:String = "<urlhere>";
              [Bindable] var displayName:String = "Guest";
              [Bindable] var isPriviledged:Boolean = false;
              
              protected function loadComplete():void
              {
                  SetFlashVariables();
                  
                  // Attach the cleanUp function to a javascript function myFlexFunction()
                  ExternalInterface.addCallback("myFlexFunction",cleanUp);
                  // For Internet Explorer, FireFox, Safari or other
                  
                  currentState = "default";
                  
                  session.archiveID = "session";
                  session.login(); 
              }
              
              protected function SetFlashVariables():void
              {
                  //Read in the roomUrl from the flash vars.  If they fail, set an Error label and set
                  //the room to default - videochat.
                  try
                  {
                      var flashVars = this.loaderInfo.parameters;
                      roomURL = "<urlhere>" + flashVars.room;
                      if(flashVars.room == null)
                          roomURL = "<urlhere>";
                  }
                  catch(error:Error)
                  {
                      roomURL = "<urlhere>";
                  }
                  
                  //Read in the userName from the flash vars.  If failure, then name the user "Guest"
                  try
                  {
                      displayName = flashVars.userName;
                  }
                  catch(error2:Error)
                  {}
                  
                  //Read in the priviledged boolean from flash vars.  If failure, set isPriviledged to false
                  try
                  {
                      isPriviledged = flashVars.isPriviledged;
                  }
                  catch(error3:Error)
                  {
                      isPriviledged = false;
                  }
              }
              
              protected function session_Loaded():void
              {
                  aPublish.publish();
                  
                  //Set the username that appears to display name
                  session.userManager.setUserDisplayName(session.userManager.myUserID, displayName);
   
                  //Only record the conversation if the call is not priviledged
                  session.archiveManager.recordSession = isPriviledged ? false : true;
                  if(isPriviledged)
                  {
                      eyeballImage.source = "@Embed('assets/norecord.png')";
                  }
                  else
                  {
                      eyeballImage.source = "@Embed('assets/record.png')";
                  }
              }
              
              public function cleanUp():void
              {
                  session.archiveManager.recordSession = false;
                  var tenSecs:Timer = new Timer (1000, 15);
                  tenSecs.addEventListener(TimerEvent.TIMER, onTick);
                  tenSecs.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerComplete);
                  tenSecs.start();
              }
              
              public function onTimerComplete(event:TimerEvent):void
              {
                  session.archiveManager.recordSession = false;
              }
              
              public function onTick(event:TimerEvent):void
              {
                  trace("tick " + event.target.currentCount);
              }
          ]]>
      </fx:Script>
      <fx:Declarations>
          <rtc:AdobeHSAuthenticator id="auth" userName="&lt;userhere>" password="<passhere>" />
      </fx:Declarations>
      <s:HGroup horizontalAlign="center" width="100%">
          <s:Label id="teamLabel" text="TEAM Video Conference" fontSize="16" fontWeight="bold" />
      </s:HGroup>
      <rtc:ConnectSessionContainer id="session" roomURL="{roomURL}"
                                   authenticator="{auth}" autoLogin="false"
                                   height="80%" width="100%" includeIn="default"
                                   creationComplete="session_Loaded()" label="Label" name="Name">
          <rtc:WebCamera top="10" left="10" bottom="10" right="10" />
          <rtc:AudioPublisher id="aPublish" />
          <rtc:AudioSubscriber id="aSubscribe" />
          <mx:HBox horizontalAlign="right" width="100%">
              <mx:Image id="eyeballImage" source="@Embed('assets/record.png')" height="32" width="32" top="10" z="10" />    
          </mx:HBox>
      </rtc:ConnectSessionContainer>
  </s:Application>
  
  

  
  Thanks again for the help,

  -Eric

  Hi Eric,.

  You're right, there is a sporadic problem, unrelated to your function-

  We will be fixing this for the next version. We can update the SWC

  posted here once the bug fix has been verified in our side.

  Thank you for reporting this issue.

  Nigel

• Registration to the repository

  Thanks a lot for the invitation to the private beta and How to e-mail.  We have started to the test and have successfully Setup of the Server repository to repo.inmatecanteen.com... but no archives appear companies low-cost.

  We tested successfully a PUT and it took a leak ' / '!

  curl - k - anyauth t test.txt < our url>

  We ran the jar file, necessary after the leak to find "/" was necessary.  No output was returned from executing the command.

  java-jar LCCSREPO.jar < name of account - > account < user > < password - > registry-repository our < url > > sortie.txt

  During the test with my flash app, I see not all archives that show in the repository.  I tried to make a button to save and close the archive manager.  My flash for the session connect container code is attached.

  Is there something that I am missing for the session connect container?  My deposit work properly?

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" 
                 xmlns:s="library://ns.adobe.com/flex/spark" 
                 xmlns:mx="library://ns.adobe.com/flex/mx"
                 xmlns:rtc="http://ns.adobe.com/rtc"
                 minWidth="955" minHeight="600" currentState="logon" applicationComplete="loadComplete()">
      <s:layout>
          <s:VerticalLayout paddingBottom="6" paddingLeft="6" paddingRight="6" paddingTop="6" />
      </s:layout>
      <s:states>
          <s:State name="chooseRoom" />
          <s:State name="default" />
          <s:State name="logon" />
      </s:states>
      <fx:Script>
          <![CDATA[
              import com.adobe.rtc.events.SessionEvent;
              import com.adobe.rtc.archive.ArchiveManager;
              import com.adobe.rtc.session.managers.SessionManagerPlayback;
              import mx.utils.Base64Encoder;
              
              import mx.core.Application;
              import mx.core.FlexGlobals;
              import mx.events.FlexEvent;
              
              [Bindable] var roomName:String = "videochat";
              [Bindable] var roomURL:String = "<our Url>";
              [Bindable] var displayName:String = "Guest";
              [Bindable] var isPriviledged:Boolean = false;
              
              protected function loadComplete():void
              {
                  //Read in the roomUrl from the flash vars.  If they fail, set an Error label and set
                  //the room to default - videochat.
                  try
                  {
                      var flashVars = this.loaderInfo.parameters;
                      roomURL = "<our Url>" + flashVars.room;
                      if(flashVars.room == null)
                          roomURL = "<our Url>";
                      roomName = flashVars.room;
                  }
                  catch(error:Error)
                  {
                      teamLabel.text = "Error: Invalid Room Specified.";
                      roomURL = "<our Url>";
                      //newRoomURL = "<our Url>";
                  }
                  
                  //Read in the userName from the flash vars.  If failure, then name the user "Guest"
                  try
                  {
                      displayName = flashVars.userName;
                  }
                  catch(error2:Error)
                  {
                      displayName = "Guest";
                  }
                  
                  //Read in the priviledged boolean from flash vars.  If failure, set isPriviledged to false
                  try
                  {
                      isPriviledged = flashVars.isPriveledged;
                  }
                  catch(error3:Error)
                  {
                      isPriviledged = false;
                  }
                  
                  //userName.text = displayName;
                  auth.userName = displayName;
                  currentState = "default";
                  session.login(); 
              }
              
              protected function session_Loaded():void
              {
                  aPublish.publish();
                  //Only record the conversation if the call is not priviledged
                  //session.archiveManager.recordSession = isPriviledged ? false : true;
                  
              }
              
              private function record():void
              {
                  session.archiveManager.recordSession = recordButton.selected;
                  session.archiveID = "archive1*******";
              }
              
              private function closeArchiveManager():void
              {
                  session.archiveManager.close();
              }
              
              protected function chooseRoom_click(event:MouseEvent):void
              {
                  //chooseRoomCombo.selectedItem;
              }
          ]]>
      </fx:Script>
      <fx:Declarations>
          <rtc:AdobeHSAuthenticator id="auth" />
      </fx:Declarations>
      
      <s:Label id="teamLabel" fontSize="14" text="Title goes here" />
      <s:HGroup top="250" horizontalCenter="0">
          <s:ToggleButton id="recordButton" label="Record" includeIn="default" click="record()"  
                          height="50" width="150" />
          <s:Button id="closeButton" label="close" includeIn="default" click="closeArchiveManager()"
                    height="50" width="150" />    
      </s:HGroup>
      
      <rtc:ConnectSessionContainer id="session" roomURL="{roomURL}"
                                   authenticator="{auth}" autoLogin="false"
                                   height="90%" width="90%" includeIn="default" creationComplete="session_Loaded()">
          <rtc:WebCamera top="10" left="10" bottom="10" right="10"  />
          <rtc:AudioPublisher id="aPublish" />
          <rtc:AudioSubscriber id="aSubscribe" />
      </rtc:ConnectSessionContainer>
  </s:Application>
  

  Yes, the ID must match or you can choose to not specify recording and playback.

  -Jamie

• Chess game, how to stop the project to continue

  If the user fails the test that I don't want them to be able to do b/c for those who have passed, I have created a certificate. I have my settings of the quiz in the success or failure "If the passage of rank"-go to the next slide. "If the quality defect:-send email to... on the drop down menu continue it play the project is not checked." But when I tested it out, he continues to play the project when the user fails. Should I set the Action if I fail the Action No.? Other solutions?

  ashorsley,

  One thing you can do is set such as if the user fails the test, then he jumps to a slide that you created.  The blade can simply say "Thank you" or 'Sorry, you do not pass' and include additional instructions the learner might need.  Say what you want.  Whatever it is, then set your project options to close the program.  So, it looks like this:

  For example:

  Slide 26: last question slide in the quiz properties: at the exit of the slide: go to the next slide

  Slide 27: Results of the quiz slide properties: at the exit of the slide: go to the next slide

  Slide 28: ' congratulations, you passed. "          Properties: At the exit of the slide: go to slide 30

  Slide 29: 'sorry, you do not pass."               Properties: At the exit of the slide: go to slide 30

  Slide 30: thank you very much.                                   Properties: At the exit of the slide: no action

  In preferences/Quiz/publish/success or failure, set the following parameters:

  If the passage of rank: go to the slide 28

  If lack of rank: go to the slide 29

  Publish/preferences/project/start and end, set the following parameters:

  Project end options: Action: close project

  Who should do if I understand your problem.  It worked for me.

  WARNING: In settings/preferences/publication/Quiz if you set must pass required - the user must pass this questionnaire to continue, then this solution will not work.  Assign the necessary - the user must take this questionnaire to continue, then it should work fine.

  Good luck.  Let us know how it works.  Any other questions, feel free to ask.

  Take care

  Jorge G.

• Simple question Oracle Workflow Builder

  Hello
  
  I have problems to connect to the DB with the workflow Builder. I get this error when connecting:
  
  + 1300: could not load. +
  + 1114: don't load database. +
  + 1101: could not load item types of database. FILTER = % +.
  + 333: could not set properties of type of elements to 'IBYOPCC '. +
  + 332: validation failure 'SET' type of 'IBYOPCC '. +
  + 306: invalid display name "Tarjeta de crédito/Tarjeta of Compra de Operaciones of iPayment. +
  + 203: value contains spaces beginning or end. +.
  
  I installed the customer in my desktop (WIN XP)
  
  E-Business-Suite: R12.1.1
  
  Workflow Builder: 2.6.3.5
  
  DB: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
  
  
  All ideas, suggestions are welcome.
  
  Thank you
  
  Rodrigo

  Hello

  Please consult the following and see if it helps.

  Note: 160544.1 - Workflow Designer cannot load Workflow database because of "space flight".
  Note: 179987,1 - Builder cannot load Applications of Workflow objects when the NLS_LANG is UN-American

  Kind regards
  Hussein

• Dynabook SS 1700MY - ' alert: System protection USB key set failure.

  Toshiba dynabook SS 1700MY displays "alert: System protection USB key set failure.

  So here's the story:
  I accidentally tickled my friend that is using his laptop and he spilled his Coke into the laptop.
  I told her to turn it off, and then he wiped his spill in the keyboard.

  Then, when he tried to open it. He opened Fortunately, but it says:
  Alert: System protection failure.
  Set the USB key:

  Me and my friend do not know what it is. Just reply to us if you know what is this 'USB key '.

  We do not know what it is, so please tell us if you know what is the USB

  Dynabook SS 1700MY is not known to me... I guess this isn't a European model for Toshiba laptop...

  The error message looks like a BIOS password. It seems that the security of the system has been compromised.

  Unknown BIOS password can be removed from the laptop user but can be removed by the Toshiba authorised service provider available in your area.
  So you will need to return the unit to an ASP for a password reset.

• "Minor"? Failure in HP Advisor setting/reading?

  I've owned a Pavilion laptop for about ten months of use of light trucks; and so far, zero problem. I get a "message" type when I open HP Advisor and dashboard then PC. To the top right of the screen, the cell extended battery is capable of holding the load and seems not to work normally, but... When I run the HP Battery Check application I get a failure ID 60E7U1-51J5AP-XD7U21-C09E03... I also tried this on normal with the same results battery and two others near new drum sets that seem to be working on other laptops...

  I don't get any additional computer problems sort or codes for the system error. Based on the above facts, it would seem that it could be: a problem of software with HP Advisor, another hardware issue inside the laptop or a charging problem - which doesn't seem to be the case all batteries, works very well.

  One last question... Is - this political HP will have to hold a collateral type of credit card or deposit on a warranty item when it is not due to the fault of the consumer?

  Any other ideas?

  Doesn't seem to work, but I thank you for the ideas...

  I'll go the route of: completely back up every shred of data, and then delete all the HP programs , as it appears as if the HP software is at fault. Both the number never correspond with the windows icon tray lower right; and now I get three different version of battery error codes.

  Yet, the two batteries seem to be good and also wok fine on other laptops, that they are aligned with the rest of the computer seems to be fine

  I am very disappointed by what seems to be the HP policy who need guarantees for an idea of the tech wanted to do--a kind of battery.