Failure to access printer

Similar Questions

• HP6830: Failure of the print queue

  HP replaced my 6830 due to failure of the print head. New printer works proud desktop using Vista. Previuosly I could print from my laptop wireless as well, but it's time the print queue says printing, fails to print and return to errot impression. I know that thw laptop is connected to the printer thr and I even can it ping ipconfig without problem. I have been through software support, and to the low load options hear everything without any result. I am now confused.

  Hi @3391816Sablenip,.

  I read your post and see that the replacement printer is wireless print on the Windows Vista-based computer, but not the laptop running Windows 7. I will definitely do my best to help you.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
  Type the IPv4 address in the address bar of your web browser. (Internet Explorer) It to load the page.

  You mentioned that you can test the printer, just to check a real contact, check the network IPv4 address on the computer to see if the first 3 sets of numbers match the IPv4 of the printer address.

  Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
  Check the IPv4 address.
  Now, check the IPv4 address for the printer.
  If this isn't the case, then the printer and the computer are not on the same network.

  Do the first 3 sets of numbers match?

  Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
  Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
  If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

  Type the IPv4 address.
  Make sure the printer is online.

  Test the printer. If creating the new port doesn't work, run the Add Printer Wizard.

  If you're still having problems, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If the problem persists, try the following steps to see if it will be useful. HP printers - print jobs stuck in the print queue (Windows).

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP Officejet 6600 e-all-in-one printer - H711a/H711g 'Ink system failure', will not print computer

  At first, it was just a problem with do not print from the computer.  Error messages had to do with the failure of the print head or do not find print head, etc..  After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure".  I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power.  Since this is a wireless network, I can't unplug the USB.  It was the OK signal.  Now, with this error message, I don't see the home screen printer controls.  It just says: put it on and then contact HP.  Help, please.  Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)

  Wildrat58,

  If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• Problems printing PDF doc. get pg 'PRINT' OK, but only shows lieutenant PG side. -cant access "print" key?

  Problems printing PDF doc. get pg 'PRINT' OK but only left side of the pages watch - cant access "print key" which seems to be off the screen to the right?  Think it has something to do with my screen resolution settings.  What is the setting of screen resolution needed to get the page COMPLETE "Print"?

  Hi rons78558679,

  Right-click on the desktop and select screen resolution, now increase the resolution & check if it solves your problem.

  Kind regards
  Nicos

• I want to create a photo book printed by Shutterfly, but when I CREATE a photo album, the printing option is only LOCAL - how can I access print options Shutterfly?

  My goal is to create a photo book printed by Shutterfly. When I go to CREATE > PHOTO BOOK, the only option of SIZE is PRINTED LOCALLY (11,00 x 8.5 inches); Shutterfly size options (8,00 x 8.00, 11.00 x 8,00 and 12,00 x 12.00 inches) do not appear. How can I access print options Shutterfly?

  Windows 7 Professional, Version 6.1.7601 Service Pack 1 Build 7601

  Adobe Photoshop Elements 11

  World of Jim

  Hi James,

  Shutterfly and Adobe have recently agreed to remove the print service to Shutterfly who has been integrated into Photoshop Elements. Therefore, options related to the order of prints by Shutterfly are no longer available in Photoshop Elements.

  Kind regards

  Sandeep

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• Failure on label printing

  Hi, at the and of the test failure, I have the need to print the message of failure on the label. I need to print: SequenceName testName, measurement, high limit, low.

  Is there something already implemented in TestStand? What is the right approach, should I use the reminder "SequeneFilePostStepFailure"?

  Thank you very much.

  Hello

  Try to use "Parameters.Step.Name".

  Why you will not see it?  Because you go to the step of the object. and the name of the property

  For more information look in TS-help under the terms of the Index 'Step '.

  In this thread, there is a fine example of this reminder

  http://forums.NI.com/T5/NI-TestStand/repeating-a-failed-sequence-once-more/m-p/1042268

  Concerning

  Jürgen

• INF. reason installation failure:-l' access is denied after installing Windows Steady State.

  Hello

  I use Windows XP MCE 32 bit Edition with Service Pack 3. seen the stable state of windows installed, when I connect another say pop up message account.a INF install failure.reason:-l' access is denied. How can I solve this problem. Please, help me to solve this problem.

  Your help will be very appreciated.

  Thank you

  Hello

  You can validate the query in the link mentioned below for assistance.

  Windows SteadyState Forum

  Hope this information helps.

• Failure of 'pipeline' printing/Windows Vista and HP 5740

  Windows vista and hp office jet 5740: all of a sudden, I get the message of failure to print: PRINT FILTER PIPELINE HOST STOPPED WORKING AND WAS CLOSED.  I do not understand what it is and I tried to find solutions that I CAN understand and have had no luck.  I really need help!

  Open Add/Remove Programs, components windows, chk the boxes for printing... In addition, go to run, or cmd,.

  type: services.msc scroll down to print spooler, double-click it, the value of auto-start...

  A good utility from microsoft's 'print migrator', this utility gives specific information for printers.

• Print PDF caused the failure of the print spooler

  I have been all over these blogs, and nobody has the answer. I had no problem and then today when I tried to print a pdf file, everything went haywire. I can not print, I can't remove and reinstall my printer, I can't restart the print spooler (it tries but stops, and then said: he started, but he didn't). HELP ME, PLEASE.
  Janie

  Hello jrino,

  Thank you for using the Microsoft answers Forum

  Apart from the pdf printing problem can you print other programs such as Word, Notepad, or Wordpad? Try to go to the event viewer and see what errors are being given in the viewer list. Also during activation of the print spooler service, make sure that the spooler depends on all the services are started as well.

  Access Event Viewer: right click on computer and select manage. Click event viewer, and then expand the view so that you can access the different categories. Expand Windows logs, and then click Application. Scroll down and see what kind of errors you found and see if that helps you evil pulls on the question. Post what you find in this thread.

  Looking for services that depend on: click console in the management of the computer Services. Click Services and Applications and then click Services. Find the print spooler and double-click to view the properties. Watch dependent services for the spoooler and to ensure that these services are started and running as well. If one or more of the dependent services do not work this may cause your spooler to stop working as well.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• "Failure of the printer: there is a problem with the printer or ink system" message

  I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

  I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

  What can I do else?

  Hi Embie2014,

  Thanks for letting me know you are using the HP cartridges No.

  HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

  A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document explains how to clean the print head.

  Thank you.

• When I try to access Print Hoodie, as an administrator, it says access denied.

  I can't click on "Pring Hood" as an administrator.  I get a message saying that access is denied.  How to fix this?

  Hi The_gbp,

  I suggest to run the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information about SFC, please go through the link below:

  http://support.Microsoft.com/kb/929833I

  Authorization number:

  Are the files you have displaced questions of old computer?

  If so, then this has to do with security settings that old computer (Vista or XP) applied to these files. Since their creation of your XO or Vista user account, they do not apply to your user account in Windows vista, and if you refuse access in certain circumstances.

  To resolve this problem, you can follow these steps:

  1. click on Start, click all programs, and click Accessories.

  2. right click on command prompt, and then click run as administrator.

  3. in Administrator: command prompt,

  4. type takeown /F neighborhood of printing and press ENTER.

  5. type neighborhood of printing CACLS / and press ENTER.

  Note: Administrator can be change to your local user with the permission of the administrator account

  7 restart the computer and test the issue.

  For your information, please see the following articles:

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Takeown

  http://TechNet.Microsoft.com/en-us/library/cc755342.aspx

  Cacls

  http://TechNet.Microsoft.com/en-us/library/bb490872.aspx

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• can I get a failure eprint to print from the site. This was sent by another person, so I can't re - print

  A friend sent a job to spring for my printer, but it wasn't at the time. When I turned it on it did not print but came with failure when checked on the site. Can it be printed via the site or I have to send again.

  Hi Chookykiller,

  You will need to return the work for you. You can leave the printer on so that it doesn't happen to you. Have a wonderful day.

• cannot access printer program crashes

  Whenever I try to access the printer Photoshop CS6 breaks down and no the printer screen. He worked 24 hours ago and everything else on the OK computer printouts.

  Please, any help-

  The problem has been resolved by removing the unde4 Appdata\roaming\adobe\adobe PhotoshopCS6\Adobe Photoshop CS6 Settings\Adobe Photoshop CS6 Prefs.psp prefs.psp file.

  I deleted the folder and restarted Photoshop and the dialogue of the printer works fine now. This info came from another forum search here,

  Tom Forrest

• When I click on the Moilla button on my desktop, the firefox start page appears, so does Mozilla no button to access print, history. options etc, it just says: start mozilla firefox at the top page. RT page tc.

  When I click the Mozilla icon on my desktop, a mozilla firefox start page developed that has NO mozilla button to click and access the characters, story, options, etc. Also the entire page shifts automatically down a bit to only show that google question box and no address bar. Also, there was once a place where I could click on pages more accessible, but that disappeared a few weeks before. I have a HP computer and that you never know what will look like the start page.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.