Failure of 'pipeline' printing/Windows Vista and HP 5740

Similar Questions

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Connection to printer Windows XP and Xerox 7132 problems

  I am running Windows XP, Windows Vista and Windows 7 on a network connected to a printer xerox 7132.  The XP machines will be able to send some documents before losing the connection.  I tried to remove and install but still the same problem each time.

  If anyone has had similar problems and know a fix?
  Hello by the way the Forum!

  Hello

  (1) did you nay recent Hardware / Software changes prior to this question?

  (2) you are able to print from other computers?

  (3) what is the exact error message while trying to print from XP computer?

  (4) how many computers are connected with the network?

  (5) the issue is with the printer or are you affected by network Windows XP problems?

  (6) did you check the printer connected locally to the computer?

  Check the city link FIXIT who may help you fixing the issue below.

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  You can also try to download the latest drivers and update the Firmware that can help you.

  Method 2: WorkCentre 7132 support & drivers

  http://www.support.Xerox.com/support/WorkCentre-7132/downloads/enus.html?OperatingSystem=WinXP&fileLanguage=en

  Hope this information helps.

• Sharing data between Windows Vista and Windows 7

  As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

  Hello

  Set you up a network between Vista and Windows 7:

  "Networking of computers running different versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  "Learn how share files and printers on a network with computers running.
  Windows XP, Windows Vista and Windows 7. ... This article also covers the
  necessary parameters to set up file and printer sharing on your network. »

  See you soon.

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista and even Windows 07?

  I am trying to download a game, but the system is Windows XP or Windows Vista. Well, I have Windows 07 is Windows Vista and Windows 07 looked at the same thing?

  Hello LittleRed,

  If requirements call for Vista, so general, it should run fine under Windows 7. We are talking about 32-bit or 64-bit here? To be on the safe side, you could try to create a Restore Point before you download and install.

  Let us know if you need more help and thank you for visiting the Microsoft Vista answers forum.
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Dell 1014 works on Windows Vista and I want to install Windows XP on it. "I am train to install a version that is older than the version that I already have."

  My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?

  original title: Windows XP installation

  Hi Ribhu,

  How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?

  You can try a new installation of Windows XP after formatting the hard drive Vista and check.

  You can consult the following wire link and check if it helps.

  How can I replace Vista with XP?

  Note: The above mentioned thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out the link:

  How to install or upgrade to Windows XP

• Microsoft Outlook is compatible with Windows Vista and Windows 7?

  Is there a way by which Outlook can be installed on a computer, Windows Vista and Windows 7.

  We have replacements for Outlook. If so, how to get one?

  Farhad

  «Farhad...» "wrote in message News: 05c1a45d-b7ab-4b99-8a06-b131bb67989b...

  I wanted to know about Outlook Express. I heard that its not available with newer versions of Windows. Is Windows Live Mail used, what is the replacement for Outlook express in Windows Vista and Windows 7. Farhad

  Outlook Express has been replaced by Windows Mail in Vista - and completely removed in Windows 7.
  Windows Live Mail is now supported by MS free mail client and can import messages and contacts in the OE stores.
   
  Note that the upgrade to Windows 7, XP requires a format of the HD - back up your data in the first place, if do a upgrade.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• I have Windows Vista and was able to SAVE flash from adobe, but it does not open.

  I have Windows Vista and was able to SAVE flash from adobe, but it does not open. Can someone send me a link to a fix. I can't open videos, games or live videos. Someone please help. Should I change my operating system?

  Software Adobe isn't really an option-backup software, you install adobe active X software to enable it. Whatever it is,

  Just go to macromedia.com to install adobe... If she refuses, then your user account is not set as an administrator, to change

  account, disable the parents settings. Macromedia's flash player.

• I have windows vista and somehow my picture turned screen 180 degrees backwards. How can I fix it?

  I have windows vista and somehow my picture turned screen 180 degrees backwards.  How can I fix it?

  Hello FrankHeinsohn,

  Hold down the ALT and CTRL together and then press the left/right/up/down to change the orientation. Press the combination of keys followed by the arrow key to the left first to see if this changes the orientation (you may need to press the selected keys a number of times to get the correct orientation. If the left arrow does not try the right, if this does not work try the high and arrow down.

  Usually, this action solved the problem. If she does not see if you have an icon in the Panel that gives, you go to your video card. Your card might be control NVidia or ATI control panel. Check the tabs until you see an option to change the orientation of the office. Yours, because the cat has his way, is currently portrait, change in landscape mode.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my tool work... thank you. __

  why I can't download and save the files to my laptop... it disappears in the air... I have windows vista and ie8... Please help I'm going crazy... this laptop is my work tool... Thank you.

  Hello locness2411,

  Have you checked your download folder? Also you can put where you want to save a file to the desktop as, for example. Take a look at these links: http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/Set-default-download-path-of-Internet-Explorer/10153/ or http://www.windowsreference.com/internet-explorer/how-to-change-the-default-download-directory-for-internet-explorer/ that can help you in what you want to change. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I am running Windows Vista and a low disk space error message.

  I am running Windows Vista and a low disk space error message.  I ran disk cleanup, disk defragmentation and cleaned up all the old files and still only have 793 MB free on GB total 103.  I noticed that my 6.0.6002.18005_001c11ba_blobs.bin file takes 54.9 GB of space.  In research, it seems that it is safe to delete this file--is that true?  If so, how? It seems that I need permission to do this.

  To give the control is a two-step process. Take ownership and then to give permissions.

  Owner of a file allows the owner to change permissions even if they do not have the authorization to do so. It's the only thing that made property. The person who creates an object owns the object. For admins, the objects that are created are the property of administrators, not the individual.

  You need start exploring as administrator to Start - All Programs - Accessories - made Windows Explorer right click and choose run as administrator.

  You must therefore make a right-click folders / drive, you are interested in tick - button Properties - Security - Advanced button - property - Edit - Replace owner on Sub containers and objects tab - select one user-then Ok your way of out.

  Right-click new - folder Properties - Security - Advanced - tab permissions - Edit button - select the account - check the two checkboxes - button - Advanced - Search now button Add button - select your tick - Ok button - total control in the list. OK your way out.

  .