Failure to display the Satellite L300

Similar Questions

• Re: FarCry not displayed on the Satellite L300

  I bought FarCry game but the graphics was not displayed in Satellite L300-1 to 6.
  Although the 3D card minimum is 64 MB for this game, it does not in my computer. Do you have any solutions?

  You have the most recent graphics Toshiba driver?
  Search on the website and make an update:
  http://EU.computers.Toshiba-Europe.com

  In addition to FarCry are patches available. I know, because I've played this game for a long time.
  A Google search for this patch.

• Why the Satellite L300 laptop screen stays white?

  Why the Satellite L300 laptop screen stays white?

  Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

  What is your recommendation?

  Thank you for your response.

  Post edited by: Sams

  Hello

  Why?
  Who knows what have you that your screen is white?
  My screen is not white it shows everything correctly.

  The same white screen will appear on the external monitor?
  If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

• How do I not what SATA driver do I need for the Satellite L300 - 03C

  How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite

  Hello

  Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
  As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
  http://209.167.114.38/support/download/ln_bymodel.asp

  Then download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
  Include these files using nLite to create the new disk Win XP that contains SATA drivers.

  Finally use this disk to start.

• Very dark screen of the Satellite L300-1FJ

  Hello

  I have a problem with LCD display on my Satellite L300-1FJ.
  It is very dark. At startup, I hardly see what is on the screen.

  I tried to increase the brightness, but it doesn't seem to work.

  Hello

  You mean you cannot increase the screen brightness by pressing FN + F7?

  Well, I think that the FL inverter is faulty.

  If the FL inverter starts to malfunction so everything on the screen will appear like behind a thick fog.
  In most cases, the FL inverter needs to be replaced.

  So contact the ASP technician in your country and ask for help!

  Good bye

• How to change the language of windows vista preinstalled on the Satellite L300 - 14 c?

  Hello
  I bought a new Satellite L300 - 14 c in German. When I started the computer, all the option that I was to install the German version. But I don't know the German language.
  What should I do?
  Thank you very much.

  You must buy the operating system on your preferred language, install it. After this visit download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads. There you can find all the drivers, tools and utilities for all European languages.

  Laptops are country specific products and if you have an operating system on another language, that you have to buy one.

• Question about the Satellite L300 to TV connection

  Hi everyone, first of all this is my first post.

  Also I'm a bit geek o when it comes to computers etc., I can use one but im not a wizz tech kid as well as use of base of an im afraid.

  I have a Satellite L300 laptop.

  My question is, my laptop has no HDMI port, but it has a VGA port.
  I have a digital TV with many ports Inc. USB, VGA, HDMI etc.

  I am downloading movies and burn them on dvd, but it's very tedious, so I wonder if I connect the laptop to the tv to use the TV as a monitor screen? so, I can either watch the dvd on the tv, and gold to direct flows to the laptop and then on television.

  I connected a vga cable for the necessary ports between the TV and the pc, and although television confirms that a pc is connected, there is only a white screen? so I guess I can't connect in this way.

  It is not possible to connect using the usb ports? or of other ideas like if I may or may not connect to this laptop?

  Kind regards

  Bob

  Hi Bob

  What laptop has no HDMI port this is a bit complicated. In General, you should be able to use your TV as external monitor. When you connect your laptop with VGA cable to your TV and turn on this port to the TV use the FN + F5 key combination and desktop to TV switch.

  If your TV is correctly detected when you use FN + F5, you should see several options. Problem is that the VGA connection is for video only and you will not hear on your TV. You can transfer the sound, but you must separate the wires and connect the headphone jack of your laptop and openings of his TV or even receiver Hi-Fi if you a.

  It's a little complicated.

• How to restore the Satellite L300 PSLB8E to factory settings?

  I have problems with repeated "crash" of my system.
  I get the dreaded blue page, which then restarts (usually) pretty quickly.

  I think trying the option 'Restore factory settings', but I've never done this before.
  If I do, which will leave it on my computer?

  I have my own disks which I was invited to do the last few months (I just got this machine since May this year) will be I need it, or is there something else that is needed?

  I have a Satellite L300, PSLB8E, using Vista Home Basic

  Hello

  Hmm. I m wondering if you checked a few discussions here on the same theme.
  Did you?
  There are more that enough son and I m sure you will not need to create this thread after reading some reviews.

  Just a tip; the use of HARD drive recovery option will format the system partition, but the D partition (where the HARD drive recovery files are placed) wouldn't be formatted!

  If you are still not sure after reading some discussions, please ask again ;)

• Upgrade memory on the Satellite L300 problem

  My laptop is a Satellite L300 PSLB8A 047004. I bought a kit of 2 x 2 GB modules and inserted carefully following the instructions (they clicked in place). When the computer reboots, the power light comes on, the fan was on but no other activity and the screen stayed black, no drive activity. Initially, there was 1-off 1 GB PC2 - 6400S installed module, and I checked the news is PC2 - 6400S. I took and put back in but same result. When I put the original module in it worked fine.

  Then I tried one of the new modules instead of lucky one but not original so the original module is now back in and everything seems OK.
  Any suggestions please? If there is damage of module to be managed, then the original 1 GB module should also be damaged, because this is one that s been managed at best.

  KeV.

  This is a typical behavior of compatibility issues. The modules you have, I mean who is the manufacturer?

  I recommend you to use high quality of Kingston or Toshiba products. For more information about compatible modules for your laptop computer, visit http://www.kingston.com/worldwide/default.asp

• Hardware components of the Satellite L300-1F9 (PSLBGE)

  Hello, I need to know all the hardware components in my new laptop, so I can find the right drivers for Vista 64 bit.

  There is no OS installed, and I want to take advantage of the features 64-bit CPU and amount of RAM.

  Hello!

  If you are installing an operating system for example the version of Vista 64 bit you want to, you can install a tool of information material such as Everest or PC Wizard 2008. With these tools, you can see all the hardware components you have in Notepad.

  But I have a Satellite L300-1F9 too and it has the following equipment:
  Intel Pentium T4200
  Intel GL40 Chipset Mobile
  Intel Mobile GL40 graphics card
  Realtek 10/100 Base-TX LAN card
  Soundcard Realtek ALC268-GR

  I hope this information is useful for you.

  Good bye

• Installation of the Satellite L300 CD player

  When troubleshooting my Satellite L300 it says I need to reinstall the device driver. He said as there is a problem with the CD-ROM device driver. When you apply the hotfix does nothing.

  Any ideas?

  > When my Satellite L300 troubleshooting...
  What kind of problems you have with your L300?

• Upgrading RAM on the Satellite L300 - 20 d

  I was wondering if the laptop L300 - 20 d.
  Can get an upgrade of ram. It has 1024 MB 800 MHZ RAM. And I need 1500 MB.

  Your laptop's RAM can be upgraded up to 4 GB.

  Upgrade, you can use follow RAM modules:
  512 MB DDR2-667-PA3511U - 1 M 51
  1 GB-DDR2-667-PA3512U-1M1G
  1 GB DDR2-800-PA3668U-1M1G
  2 GB DDR2-667-PA3513U-1M2G
  2 GB DDR2-800-PA3669U-1M2G

  Good bye

• Upgrade memory on the Satellite L300

  I bought a L300 satellite in August 08 in Australia. It came with a single module of memory 1 GB which is now inadequate.
  I got 2 x 2 GB modules but cannot make it work with the two climbs. Reports of the mounted but 4 GB Vista BIOS restarts the first time then blue screens. Ubuntu Linux crashes after loading of HAL.

  If only one module mounted it works OK and it does not matter which module is used.

  Any info on this would be most appreciated.

  There is not some special info that you can get here.
  With RAM upgrade is important to use the 100% compatible modules and also the high quality products of Toshiba or Kingston.

  Many people have reported on the same problems using certain products without name at low cost.
  2 GB compatible RAM has PA3513U-1M2G part number.

  Check it out.

• Correct the Satellite L300 (drivers Win7) installation sequence

  * System: *.
  Toshiba Satellite L-300-1AY
  Model #: PSLB8E
  SN: Y8099024Q
  Currently using Win - Vista Home Premium with Service Pack 2

  -J' got a retail version of Windows 7 32 bit Home Premium
  -J' downloaded from the Toshiba site all the new SW (drivers, etc) for Windows-7-32
  -I'll do a 'clean' for Win - 7 install

  * Question # 1
  After that the installation of Win - 7 is completed, which is precisely the correct sequence to install the drivers and the other SW from Toshiba?

  * Question # 2
  Is that install sequence somewhere mediated by Toshiba?
  If this is not the case, how do you know what is the correct order?

  * Question # 3.*
  I found the tsi4win7.exe program on the site
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?PF=true&soID=2475695
  The name is Toshiba Software Installer for Windows 7.
  -Is anyone who has used this particular facility?

  Thanks in advance for your help.

  Answer 1:

  Order of installation is as follows:
  Windows Win7
  Intel Chipset utility
  Intel Robson package (Intel iMSM driver) Intel Turbo Memory
  Intel Cantiga-GM / UMA Version
  Display driver
  Audio driver
  Giga bit LAN Driver Realtek RTL8102E-GR 10/100
  Synaptics Touch Pad Driver
  Realtek RTS5158E card reader
  TOSHIBA software modem
  Motorola ML3054/SM56 Modem
  Wireless LAN driver
  Chicony camera software
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA face recognition utility
  TOSHIBA ConfigFree
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  TOSHIBA TRS driver
  HDMI Control Manager

  Please install it and check the functionality. If there's something on the list you can install more but I think that it is not necessary. Post comments after clean operating system installation.

  Answer 2:
  No it is not mediated by Toshiba.
  After many discussions on this forum, these lists are in various different threads for models of laptops.

  Answer 3:
  This is offered on the Toshiba U.S. page but you have the European model and you don t need. Just install stuff offered on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you have any other questions you are welcome.

• Hard drive on the Satellite L300-154 crash

  On 28 March, the hard drive in my Toshiba L300 154 failed and wouldn't boot from the partition recovery or recovery disks.

  I have installated a new HDD to be identical to the previous (just without the image) and decided to try my Windows 7 disc. I understand perfectly the requirements of Windows 7 and Vista hardware on the laptop, however, after Select preference startup screen would go black and display a PX18 M0F error message (I can't really remember the code exactly) on the device cable/media not been plugged in properly.

  Check the connector on the hard drive internally so that all the other components for dry joints or fractures and all very well.

  In any case, after you take out the hard drive and install on my bench development, I loaded Windows 7 above and placed in the laptop...

  Now it loads up and gets to the point where you enter your password, but before you even see that VERY quickly the screen flashes a blue error screen.

  Am I missing important drivers/fixes? or is there a way I can be sent 32 bit Vista OS to restore my laptop? I don't really want to buy Vista as it is a very poor operating system and I can't imagine anywhere to buy now days because there is no support for it.

  EDIT:
  Details of the problem are stated:

  Problem event name: StartupRepairOffline
  Problem Signature 01:6.1.7600.16385
  Problem Signature 02:6.1.7600.16385
  Problem Signature 03:unknown
  Signature of the 04:0 problem
  Problem Signature 05:AutoFailover
  Signature of problem 06:1
  Problem Signature 07:BadDriver
  OS Version:6.1.7600.2.0.0.256.1
  Locale ID:1033

  Post edited by: bkuch

  Hello

  You must install OS when the HARD drive is placed in the Notepad.
  Please put the laptop HARD disk, restart your laptop. Enter the BIOS settings, set it to default settings and check if the HARD drive is recognized in the BIOS.

  If the HARD drive is recognized correctly, restart the computer and press F12 to get into the boot menu.
  HARD drive is it too?

  Put in ODD Win7 installation disc, choose CD/DVD as a boot device and press ENTER.
  Hopefully, the Win7 installation starts correctly.