Fan does not stop on Satellite P100-194

Similar Questions

• Silent CD/DVD drive acoustic does not work on Satellite P100-194

  Satellite P100-194 (Win XP MCE, Bios-Version 2.20)

  Given that excessive vibration of the drive DVD-Multi-with some of my DVDs and CDs, I would not use the acoustic silencer, but West no difference between Silent Mode and Normal Mode.

  I tried to reinstall the silent acoustic tool, without success. As this problem starts to get really annoying, any help would be appreciated.

  I wonder if the built-in-multi-DVD player is sensitive by default (sometimes entire Notepad starts vibrating combined with a noise level very high during playback of a dvd)?

  Thanks in advance!

  Hi WB,.

  I think that acoustic silencer simply limited the rate at which information can be obtained on CD/DVD in order to prevent the rotation high speed that can sometimes occur when extracting the CD or the DVD to the hard drive. If you're just watching DVDs (or listening to CD, by the way) then the speed of the drive will be not particularly high because once the buffer is full so there is no need to read more data from the disc itself. If you look at the car LED, you'll see that it only lights intermittently ever.

  The speed of the drive will decrease during playback, as the laser reads information from the outer part of the disc surface.

  The presence of noise and vibration normally indicates that the disk is "eccentric" or is not set centrally in the reader, and this may indicate a possible problem with the clamping mechanism itself. However, it is always worth checking that the center hole of the disc itself has no Burr or pieces of materila which he would lift off, and it is also useful to check if the label of the disc (assuming that it is a type of stick on paper) is properly attached and has no loops or bubbles in it since this may also cause noise of air.

  I have the experience of a couple of game of CD-ROM discs that cause a lot of noise and vibrations in my book and recording, I found that the central hole was slightly shifted.

  Kind regards

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Problems with Satellite A300-1 b 0 cooling: fan does not stop

  Hello users,.

  I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;
  All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!
  just one thing that make me "' it's my laptop fan, I explain:
  He turned on since I have connection ubuntu and it will be off only when that I disconnect "shutt down" my laptop, so it never stops until the

  the use of ubuntu, because with xp there start but if the processor is cold it is stop! and restart and etc...

  So if anyone has an idea, you are WELCOME!

  My laptop configuration:

  Satellite TOSHIBA A300-1 b 0
  Processor: core 2 duo T8100 2 .1GHz of
  RAM: 3 GB
  SATA hard drive
  Marvell Yukon 88E8040T Ethernet
  Intel wireless

  and I have the patched with the latest bios of the toshiba site
  Date of the bios 07 2008 v3.7 blistering

  > The use of Ubuntu, because with XP there start but if the processor is cold it is stop! and restart and etc...
  If I understand correctly using the Win XP the fan does not always with some breaks. Is this good?

  This isn't a problem but a friend feature.
  As you know the GPU creates a lot of heat.

  This is why it is important that the fan is way on and to cool the GPU or CPU if the temperature reached and some point.
  I put t know what temperature must be reached, but it cannot be too high due to overheating problems.

  Second graphics driver Toshiba control the performance of GPU and the dissipation of the heat too. If the temperature rises to a critical level (applications executing heavy performance) the diver decreases performance to ensure that the heat dissipation would come down.

  But this happens only if the cooling module will not be able to cool the internal temperature.

• The CPU fan does not work on Satellite A60

  Hello world

  I have a little problem with my laptop.
  I noticed my cpu fan does not work. only the second fan are working fine. (general fan)

  my PC is a satellite A60
  You have a solution to find why my fan does not work?
  THX

  Hello

  I put t know what fan you mean because I saw only a single fan at the bottom of the unit. However, perhaps the second fan is hidden.
  It's not easy to say why the fan doesn't work. Maybe dust clog up the fan and cooling module may not work correctly. You can try to use the vacuum cleaner to clean the fan.
  If it doesn t work so I guess there must be something wrong with the material and to fix this, replace this part. But in this case I recommend to contact the after-sales Service of Toshiba partner. He has much more experience in such cases.

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• Cooling fan does not work on Satellite Pro A300

  Hello world

  I was asked by a friend to repair their Satellite Pro A300, because their CPU cooling fan had stopped working even during the start of the POST and the laptop could overheat and shutdown. So I thought it might one of three things:
  # Fan is obstructed by dust or dirt
  # Rolling fan failed
  # Fan power cable was loose

  So I disassembled the laptop and cleaned the fan/radiator with compressed air and check the connection of the supply, which was solid, but this does not solve the problem, so I replaced the fan and the heatsink with another that I knew worked from the same model laptop that had a motherboard fault due to the bug of password to start random bios (out of warranty) but still no joy.

  I'm starting to believe that the fan was perfectly fine rather motherboards temperature of the processor or the sensors that control the activation of the fan has failed.
  Am I correct in thinking that it is essentially, irreparable without specialized tools and my friend will be content themselves to turn the system off each hourish or is there something else I forget?

  Thanks for any help.

  Hello

  I m not a technician, but for me, looks like the fan connector is working properly if you already replaced the fan and therefore, it would be necessary to replace the motherboard

  That s all I can say about it having a look for second mainboard or laptop where you can get a motherboard cheap. Maybe it works. :)

• XP audio driver does not work on Satellite P100-106

  I reinstalled Windows XP on my Satellite P100-106 and all the works of good drivers.
  Only the audio that I can not install driver.
  The problem is that my sound card changes the name, and I don't really know how his happened?

  His name was sound card Conexant high definition and now its something to gibrish... (something not readable)
  http://i44.Servimg.com/u/F44/12/54/24/92/error10.jpg

  I tried to remove the material in the hardware Manager, but again, the name is always the same.
  So, what should I do?

  Thx a lot eric.

  It seems that this has been resolved before, look for the satellites «Sound P100» P series

• Port replicator does not work with Satellite P100-160 & Vista

  I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

  It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
  You must remove the old driver and then install the new version.

  Good luck

• Re: The Wireless does not work on Satellite L10-194

  Hello
  I use Satellite L10-194 and I ve lost the restore cd but I have formatted anyway, since I found all the drivers and software.
  Only the work of doesn´t wireless. I try one on site and it dosnt work it keep showing on the hardware control network missing :(
  I tried everything and nothing works. Can I download windows xp sp3?
  Please, I have needs your help or any other site to download the software or to download the recovery for this model cd.

  concerning

  Hello

  There are only two cards possible Wlan you may have; Intel or Atheros WLan card.

  In my opinion you have a _Intel_ WLan card;

  You know Toshiba WLan Portal?
  You will find all WLan drivers and some useful documents in the FAQ:
  http://APS.toshiba-tro.de/WLAN/

  It s worth to take a look on this portal.

  Good bye

• Satellite L20 fan does not stop

  Hello!

  I have a problem with my Toshiba laptop fan:

  It starts to spin and cools the system but doesn't stop until I stop the system and restart.
  The temperature is 37 ° C at the disk and 47 ° C for the CPU.
  I have no idea why the fan stops not more and its very annoying...

  Thank you for your answers

  Hello

  You have installed the Toshiba power saver on your device? Generally, all Toshiba laptops preinstalled energy saver. This program is responsible for the performance of the processor and the fan. You must enter the energy saver and check settings that control the cooling.

• Satellite P300 - 133 PSPC4E - fan does not stop

  I have the toshiba p300-133. He is fan of still being run. It doesn't stop.

  CPUs are about 36-37 degrees centigrade.
  GPU is about 50-52.

  Are these normal?
  If this is not the case, what can I do heat from the GPU to the bottom?

  Enter the advanced power settings and in the power settings Toshiba set to optimized cooling battery method. It should slow down the activity of the fan.
  One last thing: don't expect your P300 will work absolutely quiet and no fan activity.

• Built-in Bluetooth does not work on Satellite P100

  I installed everything the package of bluetooth on my P100. It is written + BT on the back of my laptop, but I am not able to see it on my pilot system. I followed http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

  but I don't understand why nothing works. I tried (and disintall after) a USB bluetooth and it works perfectly.

  Can you help me?

  If this unit supports the BT and BT card is inside, so all drivers Bluetooth were pre-installed.
  Choose the Bluetooth with FN + F8 to use BT.
  Then the BT icon should appear in the status bar.

  Then if you want to use it you must activate the 3rd BT device and you have use the coupling function.

• 240 x fan does not stop after the BIOS updated to v2.30

  After BIOS update to v2.30 (from v2.24) on my 240 x there fan started running non-stop on ~ 3 k rpm, so that the computer is idle. Downgrade to the version of the BIOS v2.29 solved the problem.

  Just for info.