Fault tolerance allows to recover from the disaster without... possible downtime?

Similar Questions

• device disappeared from the system without first be prepared for removal. __

  The following error message has appeard in the event where the journal and I can't find my wireless network device. Driver has been reinstalled with no success. This means that the material is not? Error message is:

  The device "LAN-Express AS IEEE 802.11 g PCI-E adapt ' (PCI\VEN_168C & DEV_001C & SUBSYS_E000105B & REV_01\4 & d69bda5 & 0 & 00E2) disappeared from the system without first be prepared for removal."

  
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L300 - I can recover from the hidden partition

  Hello

  The vista on my L300 will not start.

  I try to use the modem for the first time, but he could not communicate with the line. So I delete in "Device Manager".

  After the reboot, vista boot screen appears only for 3 seconds then restart the laptop. There is no way, no safe mode...

  Contact the hd as an external drive XP say 'unknown' 0 bytes, with Linux just like named 'vista' and I could open all the files.

  I have no recovery. DVD burning with the Toshiba Recovery program has failed tree times and so I give up.

  the hidden partition is ok. On my laptop from a different manufacture, I can recover from this hidden partition. Is it possible to do it on my L300?

  Thanks for the information

  Thorsten

  Hello!

  The hidden partition you want to say has nothing to do with the Toshiba recovery image.
  There are files for system restore, and it is a feature of Vista, not Toshiba. If you want more information about the restore of the system here is a good article from Wikipedia:
  http://en.Wikipedia.org/wiki/WinRE

  The HARD drive recovery folder contains the original recovery image and if you don t have access to this folder and do not burn the recovery disc, you need a new.
  You can get one from an ASP, but you can also order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• help please. yesterday, my account Hotmail deleted all my emails and contacts on pc. now, all the contacts on iPhone 5s also disappeared. attempted to recover from the clouds, but it didn't work. Help?...

  I lost all contacts and emails.

  Have an iPhone 5s (new in December) using the latest operating system. Back to contacts with cloud, photos etc. have in desperation tried restore from the backup that I did in December but has not worked or the data is missing. I can't see the contents of the backup file, but it is one that I used when I changed service provider in December, it should be there.

  I guess the problem is somehow related to my problems to Hotmail because it seems too much a coinsidence have the same problem on both

  Advice on the possible reason of the restoration did not work and how to fix would be much appreciated

  Recovering contacts from Hotmail is done by adding the account hotmail on iPhone.

  FYI iCloud do not back up the information that are already synchronized, and your hotmail contacts are synchronized with the iCloud contacts and Hotmail servers (if you had them would be synchronized with the iCloud server).

  To retrieve the contacts to iCloud you would go to icloud.com on the computer and go to settings after you open a session. In settings, you will find backups of your information is synchronized usually some contacts/calendars and other files, and you can choose the one you want to restore, but iCloud does not restore the hotmail contacts.

• File recovery does not file recovered from the original folder

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

  I think you'll be lucky to get anything.  Where a file is no not part of the file - it's the metadata stored elsewhere, so it is not possible to recover the files to their previous location.  In the future, it would be much easier to restore files if you have a backup.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

• Cannot access folders after recovering from the virus.

  My system was infected by the virus from Windows recovery. It seems to me have removed, but now I can't access certain folders, such as Documents and settings, Cookies, ect. Change permissions don't seem to work. I'm getting an access denied.

  Hello

  Make sure that you have tried the steps listed in the article provided in the method 1 to change permissions.

  Method 1:

  I suggest you try the steps from the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  Method 2:

  Alternatively, you can scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• recover from the recovery partition

  I found several entries by searching in the forum, but nobody seems to be similar to my problem:

  I want to recover my windows vista system partition using the partition recovery on my T61p.

  It worked very well for me last time. But in the meantime I installed Ubuntu which was installing the grub loader, I think that what causes the problem all to rewrite the mbr.

  By pressing the Thinvantage key while booting does not show me the usable entries. If I boot from the Thinkpad - Recovery Boot disk iexpect only after pressing 'next' linux partitions and data will be deleted also.

  But especially as I could finally recovery... "Select the partition you want to use as the system partition" or another message like this.

  I remember, I was delighted when I saw this message. Because at the time, I was doing this I was expecting something like that. But today, that would be great, I don't have to reinstall Linux.

  Can you please tell me how I'm going to continue?

  Thank you

  For 3 or 4 days I'm looking a solution for my problem.

  I tried many things and spent a lot of time reading about similar issues.

  Windows Vista Ultimate on my T61p is not able to upgrade to SP1. I did it via ThinkVantage System Update, Windows Update function function and I downloaded the SP1 of Microsoft.com.

  Meanwhile my games installed do not work, I reinstalled them and then got an error message like: ereg.exe does not work.

  Installation completed then and I got the same error as before, at the start of the game.

  I had a serious accident before 4 months and I spent all the time in hospitals. My only satisfaction now is my new T61p and I don't get to work.

  PROBLEM:

  Maybe I did something wrong before update so I tried to use the recovery feature to set windows to the same status as when I got the laptop.

  I tried using the CD Boot Vista added, disk 1-c and the last c. I also tried using the recovery partition which I did not have to work when I started this thread.

  During this time I installed the rescue and recovery 4.2 and now he got the correct menu entry. When I select this function (F11) starting the computer was 'normal' and I had the selection of GRUB menu...

  I also found a scandiskpatch.exe which should correct some problems of RnR using Vista and 4.2 RnR. But when I doubleclick on it, I get a message that my computer do not have good condition for the correction of program (or something else, I use the German language pack.

  I want to restore my computer, and then try to update and if this doesn't work I still will have to find a solution for this.

  Please help me with this very annoying problem.

• Input field semi-automatic apex allows only values from the suggestion

  Hi team,

  I use Apex 4.1.

  I have a field 'AutoComplete' in my page. Y at - it sort of in which I can limit the entries only from the suggestions and the user cannot type values in the field.

  Thank you

  Jyo

  I agree with Jari. Why do you need a control that allows free to restrict text values? Select lists, lovs of popup or plugins such as skillbuilders or enkitec lovs modal best fit the Bill. These allow free text entry but have a setting to restrict their lov values. They have not seized semiautomatic, but then again they have a list that you can search. Or check the select2 plugin, which is also very nice: - point Plugin - Select2

  Further, I note that the entry widget semi-automatic apex IS NOT a jQuery UI autocomplete. The widget of the apex is almost causes, do not interfere with her workings.

  If you need to, and want an AutoComplete, you will need to roll your own using the widget in jQuery UI, providing the source and parameters yourself. The change on this event receives the item selected - if applicable, thus allows you to check if an option has been selected. You must always - validation on the side of extra server, as javascript validation can be easily circumvented.

• Blue screen at the start of WinSrv2008r2 recovered from the backup of windows virtual machine image

  Hello

  At first, everything seems fine:

  -to create the new virtual machine

  -startup disc for instalation of Windows Server 2008 on this VM

  -Select "Repair system" and point the backup image file (full backup - made with standard Windows backup tool)

  -system recovered successfully.

  But then, when the system restart recovered fresh - start start Windows normally - and suddenly it is blue screen with the error 0x0000007b

  IMHO, this first initiated boot of the recovered system trying to twist something in the special part of the disc and he cannot (because it's a virtual disk?)

  Is it possible to recover the system windows image file system server to virtual classic?

  Thanks in advance for all voice :-)

  Greetings,

  RA

  Welcome to the community,

  the error message is related to the controller to start the virtual machine, which is different from the original system, and its drivers are not loaded in Windows. What you try, it is to use the free VMware Converter and run the option "Set up the Machine", which should inject the necessary drivers in the virtual machine. Before doing this, please make sure that the Windows 2008 virtual machine has the default "LSI Logic SAS' controller configured in its settings.

  André

• Portege M400: unable to recover from the stand by mode

  My new M400 shot in mode standby on batteries. Then I connect indicator system po DC DC IN is on green. Then, when I press the power button / stop, the indicator of system DC IN yellow flashing and M400 remains dead. It does not respond to any keyboard input and the Dungeon of yellow light on flashing...

  Can anyone help?

  Are you sure that the adapter LED is flashing orange and not battery LED?
  If the battery LED is flashing orange, so this means that the battery charge is lower than battery threshold.

  But if it s a DC in LED, so I guess that there is an error.
  Disconnect the laptop from the AC adapter and try to remove the battery for a period of several.
  After this procedure, put the battery in the laptop and connect the power adapter.
  Try to start the laptop.

• LaserJet Pro 200 M276nw: Scans can be recovered from the internal memory to a Laserjet Pro 200 M276nw?

  Hello.

  I wonder if a tech-savvy person would be able to recover scans of the internal memory of the all-in-one M276nw?

  As in, is it possible that confidential info of the analyses could be recovered by the unit once it has been sold, recycled, etc.?  I wouldn't see my Bank and that operations that no info there...

  I guess it's not as simple as pushing "get it back" in a menu, but someone with a material and ill intentions would be able to sort?

  If it is possible, how do I clear it?

  Thank you very much

  Hi @e9999 ,

  I see you want to erase the internal memory of the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• Animation is disabled in photoshop CS6. How to recover from the problem?

  I use Adobe photoshop cs6 extended version, do not show the options of video animation and 3d animation.

  How to solve it?

  rajaganeshs84727241 wrote:

  I use Adobe photoshop cs6 extended version, do not show the options of video animation and 3d animation.

  How to solve it?

  Is this a new problem?  He has already worked on the system, that you ask the subject?

  What are your preferences > Performance parameters? Are you able to run on the GPU use?

  Photoshop CS6 GPU FAQ

  If it is grayed out, you may be able to remedy this by updating your video driver from the card manufacturer's website.

• My iPhone and Mac all have two Photos related to iCloud, same images appear on both. How to remove pictures from the phone without removing them from the Mac

  I've shared pictures between my Mac and iPhone using iCloud. Recently downloaded about 1800 brother SmugMug account family photos. Subsequently discovered that they had all been loaded on my phone as well. When I try to delete them from my phone, I get a message the suggests that if I do, the photos will be removed from my Mac was fine. How can I remove the phone and let the Mac intact?

  I've shared pictures between my Mac and iPhone using iCloud.

  What iCloudService do you use?

  • If the iPhone and the Mac are synchronized with iCloud photo library, removal of the photos from the iPhone will remove them from the Mac as well.  iCloud photo library is a synchronization service that will ensure that you see the same pictures on all devices. All change at will the timing and any deletion or any import.  To win the storage on the iPhone allow the iCloud Photos setting "Optimize Storage.
  • If photos have been synced with my photos and not iCloud library stream, you can remove them from the iPhone. They must stay in the library on your Mac. But before a massive deletion on any device, make a backup of your photo library, just to be sure.

• import photos from the phone without Photos

  Is it possible to import photos from an iPhone without "PHOTOS" / iphoto? ". I had an iPhoto library really big on the external drive that now will not migrate because I need to 72 GB extra space - which is kind of off me to iPhoto - if I had known it was going to be a problem I would have split my library before updating.

  You can use the picture Capture application to import photos from your iPhone to a folder on your Mac.

• HP DeskJet 3525 - how to scan and send the email from the printer without a PC

  Hello

  I would like to know if the printer HP DeskJet 3525 can scan and send by e-mail, by itself, without being connected to a PC. WiFi connectivity works.

  THX

  szekelya

  Hi @szekelya,

  I see by your post that you would like to know if you can scan to be sent from the printer display. I can help you with this.

  With this model, you can scan from the printer to the computer, there is no option for scanning to email from the printer.

  I have provided a document for how Scan: from the control panel.

  Here is a document for scanning the computer. Scan.

  Just select your operating system. There is a section for scanning to e-mail, via the HP software.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  If you need help, let me know.

  Good day!
  Thank you.