Faulty "Show completions".

Similar Questions

• disk (c) local shows complete with 0 bytes in Vista

  Windows vista, I have 46.5 gb but shows that it is full and 0 bytes is left.is it is possible that the disc is full within 2-4 days.other (Disc 4) uses only 30%-40%.plz help me

  Hi gauravkushwaha54,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/db44a9e5-5572-4317-bfa3-6ac1a719db56

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Captivate Tests don't show complete answers

  Sometimes, our users are not able to complete the tests built with Captivate.

  At the opening of the event, sometimes the answers are not displayed.

  The test contains the list topics numbered without any content.

  Even if the user selects a response (no matter that bad or false) the question may not be completed.

  
  

  We use pool-Questions in order to mix the test sets.

  We are not able to reproduce the systematic error.

  The error occurs sporadically in all configurations of browsers and plugins.

  We discovered that this bug occurs when the browser loads multiple Flash files at the same time.

  Some of our users start multiple Captivate quizzes at the same time and then some quizzes contain all the answers.

  Thus, it seems to depend on the number of connections that are active and open simultaneously (on Flash-files).

  We say now users do not start more than one Captivate quiz at the same time.

• I have iPhone 5s, it shows always full of storage?

  I have iPhone 5s, it always shows complete storage, how can manage us? is there something wrong system? or default with virous?

  Note Please

  You use iTunes?

  If you-

  Connect the phone to iTunes

  Go to the table of contents on the left

  Scroll to the bar of color at the end and see what fits on the phone

  You can also

  Settings - general - storage management - see which applications are too much space

  That post and we will help if you need assistance

• 3 clues on 3 different columns, but explain plan shows full table scan for select queries

  I have a table - used and have index - functional ind1 (upper (f_name)), index - (emp_id) ind2 ind3 (upper (l_name) functional on 3 columns diffferent - what, emp_id, l_name respectively.) Now when I check explain plans for sub queries, they all have two shows complete table for the employee of the table scan. FYI - employee table is non-parittioned.

  Can someone tell me why 3 indices are not used here?

  (1) select emp_id, upper (f_name), upper (l_name) of the employee

  (2) select upper (f_name), mp_id, upper (l_name) of the employee

  where upper (f_name) = upper (f_name)

  and emp_id = emp_id

  and upper (l_name) = upper (l_name)

  If I can push oracle (version 11) to use these indexes somewho - maybe using tips? Any help is appreciated.

  
  Observations:
  
  SQL> desc emp1;
   Name                                      Null?    Type
   ----------------------------------------- -------- -----------------
   EMPID                                      NOT NULL NUMBER
   F_NAME                                    NOT NULL VARCHAR2(3)
   L_NAME                                    NOT NULL VARCHAR2(3)
   SALARY                                    NUMBER
   JOB_ROLE                                 VARCHAR2(5)
   DEPTID                                     NUMBER
  
  create index idx2 on emp1(empid);
  create index idx1 on emp1(upper(f_name) );
  create index idx3 on emp1(f_name,empid, l_name);
  exec dbms_stats.gather_table_stats(user,'EMP1', cascade=>true);
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index_join(e idx1 idx2 idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select    upper(f_name),empid,upper(l_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index_ffs(e idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 2496145112
  
  -----------------------------------------------------------------------------
  | Id  | Operation            | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT     |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FAST FULL SCAN| IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index(e idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select    upper(f_name),empid,upper(l_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> drop index idx3;
  
  Index dropped.
  
  SQL> explain plan for
    2     select   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3330885630
  
  --------------------------------------------------------------------------
  | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |      | 20000 |   175K|    18   (0)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| EMP1 | 20000 |   175K|    18   (0)| 00:00:01 |
  --------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> create index idx3 on emp1(f_name,empid, l_name );
  
  Index created.
  
  SQL>  explain plan for
    2     select   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  

• See the complete slide

  Use 6 Captivate, I give the user an option to go to 3 different ways to realize the project, but not all slides will be considered in each path that takes the user. How do I set up so that the project shows complete, even if the user has not visited 100% of the slides?

  This post explains the features of the branch of knowledge: branch aware Quiz - blog of Captivate

  If you open the control panel (F9) Advanced Interaction you will see all the objects that can be marked: the slide master issue, but also as buttons, form buttons, interactive objects click boxes and areas of text entry (and interactive widgets/interactions as well). You can include a note to that type of object in the part of the report of the Panel properties if my memory is good, because I have more your installed version.

• Only show 3 lines, then...

  Hello

  I am trying to find a way in which I can view a list of people involved in a project.

  The problem is I want to be able to show only the names of the 3 (if the list is longer than 3 lines) and therefore display: «Show complete list»

  For example:

  Currently:	Must be:
  Members: Bob - Admin Charlie - Admin Sam - moderator Alex - Manager John - Advisor Max - moderator Chad - Manager Simon - Advisor	Members: Bob - Admin Charlie - Admin Sam - moderator ... See the full list

  (Where each line break is a < br > in the field of database)

  Display of the 'complete list see the institution' isn't a problem, it is the code saying that it ceases to display names more after 3 lines.

  Any help would be much appreciated!

  Thank you

  Because all names are in a single database field separated by
  tags, you can convert the names into an array:

  $members = explode('
  ', $row['members']);
  $first_three = array_splice($members, 0, 3);
  

  $first_three contains the names of the first three. $members contains the remaining names.

• Duration of the slide show CS5 does not again refresh audio clip

  In a slide show, complete with 'Fit audio slideshow DURATION' checked (duration 00; 19; 32-24), I decided to replace the audio with a composition more short (00; 10; 00; 22). With the original audio clip erased and the new added audio clip and the 'slide show audio TIME Fit' checked, slide durations recalculated so that the last slide has a 00 exit point; 10; 00; 22 but the duration of the slide show is 'stuck' 00; 19; 32; 24. the end action takes place to return to the menu, but when the last slide goes black (at 00; 10; 00; 22) keeps him slide show running with a black screen, probably all the way to 00. 19; 32 24 before it hits the end action, even if I did not let it run again at this point. I shot 'Fit slideshow to audio duration' then turn it on again, in the hope that it will recalibrate at 00; 10; 00; 22, but the length does not change. Help, please!

  Try to play with these ideas:

  Uncheck "Fit to Audio duration slideshow."  (As you probably now it have anyway).

  On the slide show tab basic properties, set the duration of the slide to zero.  Now, what is the length of the slide show?  The length of the audio new or old?

  Or, something great (so I think that the total is more audio length) on the duration of the slide.  What is the length of the slide show?

  Search now "Fit slideshow / audio.  How long is it?

  I had the same symptom as you did (audio plays beyond the end of the blades) when the durations of slide added unless the audio length and 'Fit audio slideshow' was unchecked.

• FileReferenceList does not return a complete event

  Hello people of Forum!
  
  I have an application that downloads the files. A moment with FileReference file download works. No problems. But when I try to use FileReferenceList, objects in the FileReferenceList FileReference table do not return an Event.COMPLETE, when they finished. Both versions violate the same servlet, so I start from the principle that there should not be no problem on the receiving end. When I throw in debugging code, I see the return of open FileReferenceList object and progress events, but never a full event. Here is what my code does:
  
  The user clicks on the 'Browse' button and selects the files. When they're done, the button is clicked "Upload" and they clicked. I make a few calls to a database to retrieve identifiers of document and then I go through the download process:
  
  var fileReference:FileReference = FileReference (this.uploadFileArray.pop ());
  fileReference.addEventListener (Event.OPEN, traceEvent);
  fileReference.addEventListener (Event.COMPLETE, completeEvent);
  fileReference.addEventListener (IOErrorEvent.IO_ERROR, traceEvent);
  fileReference.addEventListener (ProgressEvent.PROGRESS, progressEvent);
  fileReference.addEventListener (SecurityErrorEvent.SECURITY_ERROR, traceEvent);
  var req:URLRequest = new URLRequest (endpoint + paramString);
  Req.Method = URLRequestMethod.POST;
  fileReference.upload (req, "whatever", false);
  progressBar.label = "Loading"... » ;
  btnCancelFile.enabled = true;
  
  Here is my 'complete' event handler:
  
  private void completeEvent(event:Event):void {}
  mx.controls.Alert.show ("completed event.");
  traceEvent (event);
  }
  
  
  I'm pretty much after the code of the language reference. The complete event is blocked or am I completely missed something obvious?
  
  I'll take suggestions or advice! Thanks in advance for the help!
  
  -Andy
  

  It seems that unless you keep a handle on the FileReference, flash will clean memory engine object it real quick. Which is what is happening here - even if the files were sent to the servlet without problem, the garbage collector has been sucking the FileReference objects until they could send the complete event.

  So the solution here was to place the FileReference object in a table just before download command and then remove it from the table when the end event is raised, so that garbage collection can collect timely.

  It was in fact in the documentation somewhere, but for some reason it didn't register only.

  Anyhoo... He is a good example of what to do about the specifications of lang in the FileReferenceList page under examples.
  http://livedocs.Macromedia.com/Flex/2/langref/index.html

  Hope this helps... someone. :-)
  -Andy

• How firefox can load a full page of a Facebook game instead of half page?

  When I play zynga Facebook games (mafia wars), the page will appear completely. It starts normally, but the game will not show completely even if I scroll down, it would still be incomplete.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  See the font size and zoom - increase the size of web pages and the font size and zoom - increase the size of web pages and http://kb.mozillazine.org/Zoom_text_of_web_pages

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• Can HP Designjet 100 - you HELP me please?

  I am a novice / amateur.
  I just bought an old Designjet 100.
  I was told it worked 'perfectly '... NOT TRUE.
  (It may have been 'sitting' since it worked perfectly).
  & nbsp;
  But before I trash, I hope that someone knows enough to advise me based on some facts about the machine.
  & nbsp;
  A. I have downloaded and installed the drivers (I use an old machine "XP" because that's what it was designed for.
  B. I installed new ink cartridges.
  & nbsp;
  As soon as I turned it... it shows an error... the cartridges show complete...
  BUT... 3 of the four pens are "flashing".
  After some research, I found that it apparently indicates that the print heads are bad.
  (I tried to clean with water distilled... with no luck)
  & nbsp;
  (I couldn't get an 8.5 x 11 piece of paper to feed and output a couple of times.) It was released in white.
  & nbsp;
  My questions are:
  & nbsp;
  1. & nbsp; Will be the printer is working / not working at all... somehow... when the print heads are bad?
  2. & nbsp; If I replace the print heads (I'm willing to try) what are the chances of a successful outcome?
  3. & nbsp;(Lastly?) I understand that there is a chance that the tubes 'print' could possibly be blocked. Are they as easily replaced as "cartridges" and "heads"?
  & nbsp;
  I am retired and willing to take this as a 'project '...
  BUT
  I'm beating a dead horse.
  & nbsp;
  Respectfully
  Jim MacLeod
  & nbsp;

  1. & nbsp; Will be the printer is working / not working at all... somehow... when the print heads are bad?

  No, not if they blink.

  2. & nbsp; If I replace the print heads (I'm willing to try) what are the chances of a successful outcome?

  I think about 80%

  3. & nbsp;(Lastly?) I understand that there is a chance that the tubes 'print' could possibly be blocked. Are they as easily replaced as "cartridges" and "heads"?

  Yes, it's a risk. No it's not as easy to replace. But it is possible.

  I hope you got this cheap, because a new T120 today is not very expensive.

• Why my iPod classic displays that it is fully charged when I know that it is not?

  My iPod classic has recently demonstrated an icon of the battery as fully charged with the icon that shows that I can disconnect my iPod after that that it is fully charged. I use it frequently for a day and over time I know that I eventually need to load it but the battery icon does not show this and continues to display a fully charged icon.

  

  From time to time the icon has changed to show the level of current battery but then after a minute, he would turn toward showing completely.

  Can someone please help me with this I would really appreciate it! I don't want to use my iPod thinking that it is fully charged when it is not really.

  When the battery becomes worn, the status will be unreliable.  The iPod can say fully charged when it is connected, but if she is unable to hold a charge, the battery didn't really a good load.

• Imported photos, black / white, regardless of the size

  I'm in iMovie 9 (8.0.6) on El Capitan (10.11.2)

  I am trying to create my annual family video that integrates video and still images.   When I import the stills, appear on the project window, they show completely dark when played.

  In a few other threads, I've read that some people had success to solve this problem by reducing the size of the imported pictures.  I tried several sizes and import methods and they all give the same result - darkness.

  I've never had this problem before on this version of iMovie, but I've recently updated to El Capitan.  I welcome suggestions.

  I had this same problem when trying to make my own photo film annual and searched all over the web a solution while I updated iMovie to the latest version (iMovie, 10). I reloaded my project and it seems that the stills now appear in the Editor pane. Hope this works for you also.

• DV7-7398: 7398 DV7 overheating

  Hi all

  Since about day 1 when the machine starts, on occasion, the fan would run and stop and go nuts. Happened with any operating system or BIOS I used. I've updated to 8.1 and the latest version of the BIOS and the fan is somebut can hear it again up and down in the RPM, but it runs very slowly at best shortly after the start of the last year. I look at the time and gets over 200F if I try to do a virus scan or something that takes resources. I cleaned the best openings I could and don't think it's a problem of dust... the fan never goes to higher speeds now except for the first 30 seconds, the machine is running, no matter what the read time. In fact, I hear same punishment it run but may feel a little heat coming out of the vent.

  I'm looking to change the fan or ventilation for lack of a better solution module. I have these 2 numbers, I found HP parts when I gave my serial number:

  Thermo Module 682061-001 for about 46 dollars through HP

  Thermo pad 682100-001 for about 66 dollars through HP

  OK, what is the complete fan? I guess the pad, but must ensure that it will be the fan with it. I guess the 682061-001 is just the fan, correct?

  When I call these numbers on alternative sites it shows complete unity for both numbers and HP shows not all photos of what is what.

  Also, is it possible to force the fan on or control it in the installer? I don't see anything, but some of you, experts are much more intelligent I am.

  Another question... On the HP parts surfer if I have "add to cart" and want to check out, he gives no price and I can't buy anything except 1 time I arrived and I cannot return to this screen... How the hell anything from parts store HP do you buy? I have included my country of origin, the United States... Try plaids with those numbers and see what you get...

  Thanks a bunch!

  I give up. I'll order the 682061-001 and try my luck.

  Thank you

• OfficeJet Pro 8615: driver will not install windows 10

  Upgrade to Windows 10 windows 8.1.  Printer worked fine for a while.  The 8/30 began to have problems with printing.  Since then, have run print and scan doctor, installation software and follow all the steps detailed on the support site several times but nothing has fixed the problem.  Indeed, after you uninstall as recommended during this process, the pilot don't reinstall it not. I tried to run the full driver package, the base driver package and method of windows driver.  It is very frustarting.  I've exhausted all possible solutions on the support site.  I need to know what to look for and the steps needed to install this driver properly and restore the ability to print.  Please help before I think it necessary to change Epson or Lexmark.

  Thanks for getting back to me. Knowing that the printer will install properly on a another computer told us there is probably something on the current PC is blocking the installation of installation (the printer itself is fine). Alternatively, you can try to disable the firewall or security programs you have temporarily while you try to install the printer on the computer to see if this will allow to complete the installation.

  Just to add: make sure that the printer is on the same network as the PC you install it on. Find the printers IP address in the menu wireless printers and type the IP address in a web browser on your PC. You should be able to access the built-in web server printers if the printer and PC are on the same network.

  Here are some steps more to try it too:

  Step 1: Uninstall the device:

  Just because it is possible that a part of the software package and the pilot has made its way on your computer, I have to you find and remove the installation of the computer files.

  1. Click on the Start menu
  2. Click on all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall
  6. Click on the Start menu
  7. Select the devices and printers
  8. Click on any device once in the file devices and printers just to highlight. Then click on the print server properties at the top of the window

  

  9. click on the drivers tab

  10. click on your driver HP Officejet

  11 select Remove downstairs

  

  12. in the window Remove Driver and package click delete the driver only , and then select OK

  13 click on apply then OK in the print server properties window

  14. close devices and printers

  Please proceed to the next step.

  Step 2: Unlock hidden system administrator account:

  1. Click on the Start menu and in the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. CMD (command prompt) opens, type net user administrator / Active: Yes and press enter
  
  on your keyboard
• Next, close CMD, then restart your computer
• When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
• If your computer automatically connects to your account after reboot to go into your Start menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
• Under the administrator account, please click here to download the package full feature software and driver of your printer.
• Once the download is complete, follow the instructions on the screen to install your printer
• Once installation is complete, please open the HP Solution Center software to confirm the scan software opens and works correctly
• If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
• Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

If the HP Solution Center software works very well, you need to hide the administrator account.

Step 3: Hide the system administrator account:

1. Go to your Start menu and in the box "search programs and files", type CMD
2. CMD will fill as a search above, option just right click on it and "run as administrator"
3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
4. Next, close CMD, then restart your computer
5. When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

Let me know the results of these steps, good luck!