Fax from the HP printer without a phone line

Similar Questions

• HP Officejet 8610: Unable to fax from the computer

  I have a HP Multifunction printer and use the fax from the computer option several times a month. I discovered this week that she did not work AGAIN. I have had this printer about a year and need to reinstall the software several times. When I select the fax printer and say 'print', the fax screen should display and ask where to send them, but nothing happens. When I check the devices screen and printers, it shows the fax as unrelated to printing or pending tasks. The machine is connected because I can print to this well, that's just something wrong with the communication by fax. I found that uninstalling and then reinstalling the printer solves the problem, but the number of times that I needed to do this is frustrating. I guess that something is messed up when windows does its updates. Is there a setting of simple connection that I could update instead of reinstalling everything on all of the computers on my network? Maybe HP could be added a correction for this option to their troubleshooting.

  Hello

  You can use the universal Fax HP driver instead:

  1. Download and extract the following:
     http://FTP.HP.com/pub/softlib/software13/COL60874/DS-146586-1/HPUFDDriver.zip
     (Use a program like Winzip or right-click on the file and select extract all).
  2. Open the extracted folder and run setup.exe
  3. Follow the instructions on the screen, a printer HP Universal Fax Driver will be created on your PC.
  4. HP Universal print driver Fax, select your printer and check the box to add a queue for your printer.

  Kind regards

  Shlomi

• OfficeJet 5740: Cannot fax from the computer

  My new Officejet 5740, purchased on 11/15/14, worked fine until February 2015 - no problem with any of its functions, including faxes.

  That was all the time I went from a wireless connection to a USB connection and since then out of faxes cannot be sent from the computer, even if they can be sent from the printer by using the LED screen. There is no problem with the incoming faxes.

  Sending the printer with the LED screen is a nuisance of errors compared to the convenience of use of the computer. Lengthy discussions with HP Technical Support have been of any help. The technicians seem to think I should just give up and use the LED screen on the printer.

  After trying in vain to send an outgoing fax using the computer, the Fax status window appears saying "queue... "as the status of the fax, and it never goes one further.

  Is it possible that my passage in wireless USB connection type caused the problem? Maybe I need a different driver? If Yes, where can I download one, and what should I go for? Thank you.

  Hello @Harry46,

  Welcome to the Forums of HP Support! I see that you are not able to send a fax from your HP Officejet 5740 computer, you can send a fax from the front panel.

  I think you just need to update the drivers and software, please proceed with the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software JO 5740 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software JO 5740 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your JO 5740 (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-134701-2&cc=us&DLC=en&LC=en&OS=4063&productOid=6617254&sw_lang=&product=6617256

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if this succeeds, can now send you a fax from the computer? I'll watch for your reply.

  Thank you

• Officejet 6310 all-in-One: can't send faxes from the computer screen

  We use an Officejet 6310 all-in-one printer. Computer of my wife, a laptop Toshiba Satellite Windows 7 Professional, has suddenly come to the point that it will no longer send faxes from the computer screen. We get an error message that something must be installed or reinstalled. We have lost the CD of the software provided with the printer. We can send a fax if we have a document printed to power the machine, and we can print faxes. We lose a lot of paper and ink because of this problem. Help, please.

  Hi GregsterMc,

  Given that the Fax icon is not displayed in the window of printers and devices, you need to uninstall and reinstall the software again. This should solve the problem.

  Thank you.

• Photosmart 7150 cut 20 pixels from the edges printing borderless

  How a Photosmart 7150 cut 20 pixels from the edges printed everything without margin (low is only 15 pixels) using 4 by 6 in the document with tab?  Image was created in Photoshop CS3 on a PC running Windows 7 Ultimate 64 with the latest drivers from the HP site (Vista 64 more patch Windows 7).

  This is normal, the MECHANIZATION of the printer printing slightly to make sure there are no white borgers due to misalignment of paper.  You can possibly reduce the overspray by going to the settings of the printer, Advanced and adjust the overspray to the minimum.

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• Exactly how to download an App from the market to my Windows Phone 7.5 update when I am connected correctly?

  I can not download install the app, with the smartphone or a computer, using Zune via connected USB or Wi - Fi.

  Exactly how to download an App from the market to my Windows Phone 7.5 update when I am connected correctly?

  I can not download install the app, with the smartphone or a computer, using Zune via connected USB or Wi - Fi.

  Exactly how to download an App from the market to my Windows Phone 7.5 update when I am connected correctly?

  Have you clicked on the app you wanted? If you said right click Download.

• I can't hispeed internet without a phone line or cable?

  I have a Dell with Vista.  (no wireless)  I can't hispeed internet without a phone line or cable? Have land line now with comcast, but want to cancel and go to a cell phone, also have cable with comcast, but I'll get rid of that too.

  The other post:

  I have vista on a dell (not wireless) computer, is there a way I can get hi speed internet without a phone line or cable. ? I think to get rid of my landline and cell.and will cancel my cable.

  * original title - question internet *.

  Hello

   
  Internet speed depends completely on packages you choose.  It's the same if you plan to use Internet via your mobile phone.
   
  I suggest you to contact your Internet service provider for support on this issue.
   
   
   
   
  Thank you

• OfficeJet 8600: using "Send a Fax" in the companion printer into default printer changing to the fax printer

  Problem with the default printer, changing the Fax 8600 8600

  Windows 10 with the latest installation of the 8600 software

  This problem occurs in the printer Assistant software when you use "send a Fax".

  By clicking "Send a Fax" will cause my default printer change to the 8600 fax.

  I don't know how to change it in devices and printers, but hopes to fix the problem.

  Thanks for the reply.
  In fact, I found the solution. It was a setting of Windows 10.
  Apparently, 10 Windows will change the default printer to the printer last used (in this case, the printer named as the "fax" printer).
  To fix this, I went to:
  Beginning
  Parameters
  Devices of
  Printers, Scanners &
  and turned off the coast "Let Windows manage my default printer"

  This solves the problem. Coming from Windows 7 I wasn't aware of this setting.

• By clicking 'SEND FAX' from 8620 Assistant printer does nothing

  I am running windows 10, and I've deleted and reinstalled my printer. Now, I have a printer, but no fax in the list of devices. When I click on "Send a fax" in the wizard of printer HP 8620, nothing happens.

  What should I do now?

  @LevSeltzer,

  HP does not support the beta software. Currently, your product is supported for all the operating systems listed on the product support page.  Regarding the 10 version of Windows, visit the www.hp.com/go/windows10upgrade for more details. HP provides information on which units have been tested and qualified with 10 Windows according to availability.

• How to install Vista from the recovery disk without defining partitions?

  Hello

  I have my recovery disk and I have installed a new 320 gb HHD.
  When I installed the recovery disc, it re done the 160 GB partitions in each (2 partitions more the 1 recovery partition)...

  But I want to dual boot with XP pro because of software problems and I prefer it sometimes...
  I redid my scores, 1 - 51 GB for XP pro(32bit), 2nd - 51 GB for vista (32 gb) and the 3rd - 210 gb is for storage

  How to install with Toshiba vista o/s and stuff that comes with it on the recovery disc, immediately to the 2nd partition without affecting how I configure the hard drive...

  I have about 100 GB of photos, music, and cam vids on storage, with nowhere to put them, so I can't risk, because some are copy only (so it might be a good idea to let me know how I save this s on my storage spread in the DVD please)

  If I can t, then can some1 please tell me how to get my Toshiba OEM vista off this recovery disk or a link for me?

  Hope all this makes sense lol... Thank you
  Shane

  If you have so much important material best save is to buy an external HARD drive and copy all this stuff here. I recommend buying the small 2.5 external HDD and when necessary, you can take with you and connect to any computer, if you want to view or copy this file. External hard discs connected to other computers with a supplied USB cable.

  Return to your partitions.
  When you use the original Toshiba DVD facilities, you will have 3 partitions.
  WinRE - partition and it belongs to the Vista operating system. This partition is not visible, and this isn't some sort of Toshiba recovery partition
  -C for Vista partition
  Or-d/E to the DATA in the partition. This partition is recorded recovery image in the folder called HDDRecovery
  I don't know what model of laptop you have, but this configuration is on all new Toshiba laptops shipped WITHOUT recovery media.

  Using Toshiba recovery media, you will be able to get exactly mentioned structure of the partitions. Support to recovery facilities using you WILL NOT be able to install Vista on the second partition.

  So if you want to have the dual boot with Windows XP Home edition, you can do following:
  -At first, you are going to install Vista with support of recovery and on the second partition, you are going to install your version of Windows XP Home edition
  -At first you will be installing WXP and then you can install Vista on the second partition, but you must use the Microsoft facilities drive. Recovery media can not be used.

  That's all I can say from my experience with such things.

• HP Envy 5640: Tray from the Photo printer

  When you try to print a photo using the printer tray photo fails to print and displays the message "on paper" despite the fact that there is paper in the tray. Problem just occurred despite the printer works already satisfactory. Satisfactory œuvres from the paper tray.

  Hi @Mauralan,

  I suggest to try to clean the rollers, dust and dirt from the air can build up on the rollers, making them smooth.

  If the problem persists, please contact HP support and educate yourself on a replacement printer. Check the model number and the form to receive a file number for faster assistance. Thank you.

• Can I remove the desktop from the desktop icons without losing them in my office on my toolbar?

  need help to remove the display desktop icons without losing them on my desk from the toolbar

  Hello

  Right click on desktop - DISPLAY - uncheck show desktop icons.

  If you need new fair record.

  I hope this helps.

• Creating a PDF file from the screen printing on Windows Photo Gallery

  I need to print to PDF from Windows Photo Gallery - specifically the contact sheet

  Do I need to have something put in place in the printer section to do this?  like to convert it to the PDF format

  Hello k. Hilger,.

  The Windows Photo Gallery does not read or open the PDF files.

  The best way to print PDF files is as you say, take a snapshot using the screen printing screen.

  Save the file as .jpeg and then open with Windows Photo Gallery and you should be able to print it out.

  You may not make any changes to your printer.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to export the contacts from the people on my android phone app?

  I want to be able to have access to all my contacts in my application of people on my Android phone.  I have the phone RAZR M.  Is it possible to export the contacts from the people app?

  Hello

  Welcome to the Microsoft Community Forums. Sorry for the delay in response.

  According to the description you provided, it looks like that you want to export all the contacts within the people App, and import them into your Android phone.

  For which application you want to import the contacts on your Android phone?

  There is no option to export directly to people contacts App but, you can export the web e-mail contacts. E.g. If you have a Live/Hotmail account configured on your application of people then; See the steps suggested by 'Michael_A' or 'Ce Mark' in the next thread that explains how to export contacts of Windows Live/Hotmail on the web:

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail-email/how-can-i-export-my-contact-list-to-another/a4aeca00-8d5c-49a3-80C2-5cbaabe59407?msgId=b21ecf03-7181-4E45-b3f2-6b7db72b88d8

  Hope the helps of information. Let us know if the problem persists, we will be happy to help you.