Fax install on Equium A60

Similar Questions

• Not all of the memory installed in Equium A60 appears

  I'm unraveling an A60, A60-156 532 P4 / XP HE/256 MB / 40 GB/15TFT/DVD SuperMulti
  PSA67E - 00400C 85

  The problem is that Windows XP and BIOS do not show that there is the 256 MB of RAM installed.
  BIOS shows: 196608KB
  Windows shows: 192 MB

  I just updated the BIOS and who has not contributed to the other.
  Anyone know what is happening?

  I want to put another 1 GB of RAM in it, but I'd like to understand what the problem is before I shell out money.
  Thank you

  Hello

  the problem that you think is not a problem. Simple explanation to your 'problem' to clarify your mind:

  Your machine has a graphic chipset which has a function called "shared memory". This means that the graphics device takes a small amount (whose size is usually set in the bios and can also be changed it) of main memory (RAM) on your system and uses it to the graphics.

  So, if you have 256 MB of RAM, and windows is just showing 192Mo then it s just logical that your system uses 64 MB shared memory for graphics.
  I hope this is clear for your. Don t worry, just update your RAM.

  Welcome them

• Equium A60 - cannot install hotkey utility

  HELO

  I have an Equium A60-181and I lost the recovery disc.

  I installed Windows and then started with the suggested order:

  silent acoustic CD/dvd V1.00.005
  V6.0.1_BASIC Acrobat Reader
  wireless lan (atheros) 802 utility. 11a / g, of V3.1.1.51
  cardbus controller pci-1620 TI ultramedia pilot V1.0.0.9
  Toshiba configfree V4.60.08
  Console V3.04.00
  controls V3.05.0902
  chipset ATI + display driver V6.14.10.6430
  InterVideo windvd V5.0B11.288 - SRS

  and when he gets here, I'm trying to install: toshiba hotkey utility for display V1.00.03SA
  the installer says:
  "Driver not found!" This configuration will end. "

  Of this, I can't install any of the Toshiba tools: Pc Diagnostics, energy saving and Toshiba Utilities

  What if I'm doing wrong? What could be the missing driver? I installed EVERYTHING that has been proposed in the list and he did repeatedly reformatting.

  Thanks if anyone can help!
  Pablo

  Hello!

  Normally before you start to install the Toshiba Utilities, all drivers must be installed for the hardware so you have already installed the display driver? You may notice yellow exclamation in Device Manager?

  Check it!

  Good bye

• Cannot install XP OS on my Equium A60-155

  Hello guys,.

  I had a laptop series Equium A60-155 about 3 years old worked when I used last and it was about 2-3 months ago. I turn on the laptop yesterday into the to use and she charged up to the logo then no activity on the display showed after that.

  I formatted the laptop with Windows XP Home edition disc and then tried to install Windows XP Home edition, but it keeps stopping at 53% in the installation process.

  I went to a technician, and his suggestions were:
  -Possible overheating,
  -Damaged, hard drive
  -Configuration of the bios,
  -Damaged the motherboard or,
  -damaged band memory.

  I tried again this morning, but even once, he stopped at the same percentage as yesterday 53%. If you have any suggestions that require the problem please post your here on this post.

  Thanks to those who responded.

  Hello

  I also suspect that the HARD drive is faulty. If possible, try to get the second HARD drive for testing. It doesn't have to be a new brand. Test it and post the results.

  We can just speculate on possible problem, but I agree with technician. Take the first step and test the HARD drive.

  O Yes, you can also clean the laptop before starting the procedure of facilities. After only that the laptop will be cooled much better.

• How to install Windows XP Home on Equium A60?

  Am new to all this medical forum so I hope I can help, I am trying to install windows XP home on my laptop Equium girls.

  When I try to install XP, it comes up with a SETUPDD. SYS error, I searched the net to find errors and he says I need a BIOS update, the paperwork says it's a A60-173.
  I can't find the model, drivers or BIOS upodate, as well as the BIOS updates are installed from Windows, I can not install until I updated the BIOS.

  So I ask a lot of help, I know, thank you very much.

  Hello!

  Download page for drivers and all the other things you can find on the Toshiba driver. Equium A60 is a older laptop and so you must search in * Archives * to find all you need:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also, when you get this error message and what do you do after that?
  Have you tried a different installation disk?

  Good bye

• Equium A60 unstable after installing Windows XP SP2

  I have an Equium A60 which becomes very unstable after upgrade to Windows XP service pack 2. It has been upgraded to the latest released BIOS but no change. Someone at - it ideas?

  Hello

  In my view must avoid any problems at all. Can you please be more specific with unstable Word? What happens exactly?

• Failed to start after installing the new memory module Equium A60

  I have an Equium A60 laptop with the following specs:
  P4 3.06 GHz
  256 MB Ram (including 64 MB ATI graphics card)
  30 GB HD
  Windows XP Home Edition

  The problem is the following; I bought a bar of memory in order to update my system. I bought a Kingston SO-dimm pc2100 512 MB. After installation of the memory of the laptop wouldn't start, after about 5 seconds after having turned it on, it turns off completely.

  If I remove the memory it starts up fine. I had tested memory and its ok so there seems to be a problem with the laptop itself. I'm confused, so if anyone has an idea of what might cause boot failure, I would be happy to know.

  Thank you very much...

  As far as I know the main reason for the failure of start is the use of non compatible modules.

  According to the specifications of the laptop, you must use PC2700 512 MB (PA3312U - 1 M 51). If you want to buy the module Kingston (products of very good quality) check it please the Kingston MEMORY SEARCH

  Good bye

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option

• System failure-Equium A60 won't boot to the top

  Hey guys & gals
  for the first time using this site and need some advice!

  I have a toshiba laptop
  "equium a60 model PSA67E-No.-00200D8J.

  Ive had problems with my start up! I get an error message saying: I have a missing driver!

  read the MSG error-"system32\drivers\ntfs.sys".

  Also get message...

  "windows was not start because the following file is missing or damaged:
  system32\DRIVERS\isapnp.sys ".

  Unfortunately I can't find my original CD boot disk & I don't want to lose the files saved... not too good sense when it comes to problems with this...

  If anyone can give some advice please, it drives me crazy! Laughing out loud

  Alan.

  Heyho,

  looks like you're in big trouble. I think the only chance to backup your files is to get some linux live CD (knoppix, ubuntu and mandrake) and an external hard drive to copy the files to your hard drive internal to external hard drive attached.

  The best way would be to ask a technician or a guy who is VERY familiar with computers to backup your data.

  After that you need to reinstall your operating system but without the recovery CD, you are out of luck. Then you don't have a lot of options.
  One of these options is to look for startup disk or how to call it: "restore CD". If it is not available you should contact an authorized local dealer servicepartner toshiba and get a new recovery disk. The last option is to buy a Windows XP or to ask someone (family, friends, the one who) for a Windows XP to install.

  Greetings

• Equium A60: XP blue screen of death: Stop: c000021a - fatal error message

  "Stop: c000021a {fatal system error} the Session manager initialization system.
  ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000). The system has been shut down. »

  This is the message I get on a blue screen. I can't start the computer. His tent to restart conineously after this error message. What could be wrong someone can help.

  my system is equium A60, running on windows xp sp2 installed very recently.

  Thanks in advance.

  You should check the support microsoft help you dosent his good companion
  This, you should get started http://support.microsoft.com/kb/317189

• Failed to load money microsoft on Equium A60

  Hello. I have an equium A60 and when I try to install microsoft money, it says that it cannot operate while the toshiba keyboard shortcut properties are running! How can I activate the shortcut keys off (not that I want to do), but, if not, how can I get setup! Any suggestions greatly appreciated!

  Please see this topic that has been placed in this forum there is a little time ;)

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1476

  I think this should help you.
  Please post again if it will work.

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• Equium A60 - required OneNote product key

  Hi all

  I recently changed the HDD on my Equium A60, because the original was defective.
  I reinstalled the operating system and software, that it was delivered with the help of my DVD which is a copy kindly provided by Toshiba that I lost the original and additional recovery software CD.

  I'm trying to use Office OneNote, but as I click on the icon and start the pc to install the suite of programs I wonder for its 25-character product key that should be on the sticker on the back of the CD case or on the certificate of authenticity.
  The base of the laptop has the C of the A in windows XP and nothing else.

  Is there a way I can retrieve the product key or demand one without having to pay the price of the product?

  Any help would be greatly appreciated.

  Thank you

  Hi budy

  It is a delicate situation because the OneNote key has been placed on the sticker on the Toshiba Recovery CD which you have lost :(

  I think that there is nothing to my friend because this key is unique and I think you will have to pay to get the other keys :(
  In any case, perhaps you can ask the Toshiba ASP in your country if there is a way to get this key as well as the new CD of Toshiba \recovery.

  If all goes well, they can help

• Equium A60-155, don't 'sees' new HARD drive

  I have an old Equium A60-155, P5A67E and tried to install a new drive hard - one Samsung 120 GB, 5400 RPM IDE.
  However the BIOS (ver 1.90) is not 'see' and has no auto-detection option I see either - in fact it has very few options for anyone!

  The existing drive (original) is a Fujitsu 40 GB IDE.

  The 120 GB should be not OK, below the barrier of 128 Gb? - but would be using a suitable HARD drive utility (-Samsung offers a version of OnTrack) to make the drive HARD smaller 'look' for the Bios, be any help anyway? Is that the new drive faulty? Any other ideas?

  Any help is appreciated!

  I agree with you and think that 120 GB should be recognized correctly. It is not easy to say what the problem is here. BIOPS value default settings and check again. If the same problem persists, try using a different HDD with 80 or 100 GB to see if any of them will be recognized correctly.

  Problem is that you have limited options with all this and that he cannot do much. Either it is admitted or not.

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.