FDMEE 11.1.2.4 map to 'Jump' treat to a Dimension

Similar Questions

• Regarding FDMEE 11.1.2.3 mapping to the reconciliation of accounts manager

  Hello Experts,

  I need your help to explain the 11.1.2.3 FDMEE mapping of concepts at the request of ARMS (reconciliation account manager). ARM part of Hyperion Financial close management (FCM).

  I use Windows 2008 R2 as operating system.

  I understand that the data flow source to a staging table in FDMEE, then the staging table for ARM target application.

  But I need to know how to perform the mappings for these 2 steps.

  First of all, my source is GL file containing members of following in the format below:

  Company, account, amount, Code currency

  Now how I will interpret mapping for this under "Import Format" option and going under the "profile"? I have attached the screen shot for the same thing.

  Further, there is no separate dimensions of society and counts in the ARMS and the dimension exists with the name 'Account ID' have company-account concatenated by '-' sign.

  Now for this card, I'm going under "Application" and see that four mappings are pre-defined. Now how I map the staging table with ARMS? I have attached the screen shot for the same thing.

  Further, How to load data using "Workbench load data"?

  Need your help by performing these steps .

  I would appreciate if I can get any document to carry out the necessary procedures.

  Thank you

  Sumit

  Hello

  I have

  I suggest that you take a look at the following supporting documentation

  ID:1574080.1

  ID:1583429.1

  ID:1584133.1

  I hope that helps

  Akafdmee.blogspot.com

• How to map a cube to a nonleaf dimension level?

  Hello
  
  I use on a 64-bit CentOS 5.4 AWM 11.2.0.1.0 and Oracle 11.2.0.2.0 system.
  
  I have a time dimension with levels year, month, day, hour, half-hour and several cubes of mapping at the scale of half an hour. Now I am filling a cube using a hierarchy of time day/month/year, i.e., the mapping needs to be done at the level of the day, not half an hour.
  
  When adding the dimension of time, although I pointed out that the aggregation should be performed only on the hierarchy of the year/month/day, I still see all levels in the mapping display. And when I try to map the level of day to the fact table, I get the following error:

  The transaction is not committable: "Invalid Metadata Objects:
  Invalid Object "OLAPIN.SSD_BALANCE.MAP1.DATETIME": "XOQ-01930: The cube dimensionality map has no mapped dimension."

  What is strange, it is that it used to work on the 11.1.0.7.0 version (I have an example for this, just in front of me). Am I supposed to do things differently with new version 11.2?
  
  Thanks for your help!
  Chris

  My guess is that it is a result of

  BUG 8264467 - 10 G REGRESSION: CANNOT LOAD DATA from CUBE at SEVERAL LEVELS

  This has been fixed in 11.2.0.1 on the server and seems to have nothing to do with your problem. Unfortunately, there was a bug in the change in 11.2.0.1 MN which can cause the problems you are having. It may be related to the following bug AWM.

  BUG 8889693 - LEVEL SUMMARY MAPPING DOES NOT WORK IF YOU USE DIMENSIONS WITH SURROGATE KEYS

  There is a "A Patch" AWM to 11.2.0.1 (Patch 9672534: AWM 11.2.0.1A) that fixes the above bug and another mapping of several issues. You can try this to see if it solves your problem.

• FDMEE effective data file loading, Multiple Accts in columns

  Hi FDMEE Experts.

  I want to load the data on the numbers coming from the source system in header in the CSV format. so rest except employee, entity and the currency of the columns column account (most of the are Smatist values). We were loading the unknown world of file using the rules file where we set up accounts in the rules file, mapping and the addition of other dimensions of the application in the data file.

  Employee ID

  entity

  Period

  Grade

  Band

  Employee of expected transfer/termination Month

  Employee of anticipated year of transfer/termination

  Month's rent of the employee

  Rental year employee

  Employee status

  Location of the employee tax

  Annual rate of Comp

  Currency

  Target % Bonus the employee

  FTES

  Staff

  
  Now the question is:

  1 - How can I deal with so many accounts in FDMEE, probably by adding the dimension account account import format?

  2. There is no separate data column, all data coming in repectivs account columns.

  3 - 12 periods are also coming in rows instead of columns

  Please suggest all got no idea about this, much appreciated...

  Thank you

  VJ

  Thank you, SH, the idea to use dimensions ATTR. I'm good to load my file now.

  Solution: I've imported the TDATASEG file and then run the SQL query for her columns ATTR accounts/amount unpivot and then export to essbase.

  Thank you

  Vivek

• Source for mapping target

  Hello

  I have source codes which are actually the same as the target, but the delimiters are different, for example:

  130010_0000_01 130010-0000/01.

  Is there a way I can this card without having to create and maintain explicit mappings for each code of the DataSet?

  See you soon

  Hello

  Is - this FDMEE or classical FDM?

  There are different products, requirements, skills-based solutions...

  If FDMEE you can use #SQL mappings. They are doing better than #SCRIPT (Jython) maps because they are executed only once for all the data corresponding to your criteria of source. With this approach, you would see source that you import them (130010_0000_01) and converts the targets (130010-0000/01)

  There are many queries SQL to do, but here you have an example for Oracle DB:

  

  in FDMEE could be done as a Script #SQL to the account dimension (or any other dimension) as:

  

  For FDMEE and FDM Classic you could do this in the import format, then you can have *-> * mapping. With this approach, you would see your value already converted source (130010-0000/01) and therefore your target in the same value as you source of value (130010-0000/01).

  In the classical FDM, you need to do in VBScript:

  

  In FDMEE, you need to do in Jython:

  

  Mappings of #SQL-> documented in the FDMEE Administrator's guide

  Scripts to import-> documented in FDMEE and FDM classic guides.

  I hope this helps.

  Concerning

• Mapping ragged hierarchy

  11.2 OlAP

  I'm trying to map a cube and dimension's ragged hierarchy (products) with 1, 2, 3 and 4 with 4 being the most granular levels. The product can exist at any one of these levels. According to this http://oracleolap.blogspot.com/2008/01/olap-workshop-4-managing-different.htmlblog, the fact table key must be mapped to all the columns in the cube dimension level in the mapping of the cube editor. When I try to do it and, mapping for all levels gets automatically turned off except for level 4. This has changed since this blog was written? Can someone please comment.

  Thank you

  Usman

  This is a bug of AWM

  BUG 16438778 - MAPPING IS NOT RECORDED IN THE CUBE WHEN THE MAPPING AT SEVERAL LEVELS IN THE DIMENSION

  There is no difficulty accessible as far as I know, but fortunately, there is a solution.  Suppose that your cube is named MY_CUBE and that your dimension is PRODUCED. The following PL/SQL should solve the problem.  You need to detach the AW of minutes before that shot.  (The best to save the cube to a XML template first, then close AWM.)

  Start
  dbms_cube.import_xml(Q'!)
  
  
   
    
   
  
  
  !');
  end;
  /

  If it returns an error, then compare the above XML fragment for the XML model for the cube.  You should see something similar in the model, but it will be MappedDimension = "PRODUCT. LEVEL_4' (or equivalent).  The key point is that you must set the MappedDimension on a null value (using an empty string in XML).

• ASO Transparent Partition Mapping for large contour

  Hi guys,.
  
  I play a bit with a big cube ASO.
  I am trying to create a transparent wall with a mapping of each Member Lvl0 a dimension of the source cube for each Member of Lvl0 (with a different name in the source) in the target cube. In addition to Lvl0 members all members have the same name.
  So far so good - works like a charm in theory (the dimension whose members are mapped are identical, except the name of Lvl0 members).
  
  Now to my problem: I want to do this (mapping) for about 2.5 mio stored Lvl0 members (I know, crazy isn't).
  Is there anyone of you experience for such an amout of mapped members? Is it still possible?
  
  I guess in theory it would be possible to do. However, I don't want to manually type in 2.5 mio mappings.
  I reached with MaxL size maximum possible statement (not really surprising... the file that I have to go to MaxL is 170 MB).
  I thought to divide it into several MaxL commands, but I don't know any command MaxL add a mapping to an already existing partition of transparent without changing the other mappings of the partition or recreate the partition.
  
  Anyone of you an idea?
  
  Essbase version is 11.1.1.3.
  
  Thank you
  Thomas
  
  Published by: th. Reich on February 11, 2013 05:30

  Th. Reich wrote:
  An ideal solution that would be perfect, but is not taken in charge by Essbase:
  Build the cube with anonymized Lvl0 members having a table alias where membername cleartext is stored. Users outside our country don't you access this table alias, only users inside our country access to it. But as already said, this is not supported by Essbase.

  So if someone could think of another solution or would be able to offer a solution for transparent partition mapping, it would be highly appreciated.

  Thank you
  Thomas

  Now I can't think this completely, but in theory, you could do the "ideal solution". As you say, create the cube with lvl0 anonymised in the source and then create two cubes of target, we have the anonymous names and the other the table alias with company names... Would this be possible? As the two cubes of target would have the anonymous names there would be no partition map, but would require the cube that contains the data to be mapped once clear to anonymized. Thoughts?

• Options of FDM and Hyperion Planning Mapping

  Hi, good day
  My team has an implementation of FDM and Hyperion Planning worm 11.1.2. We essentially use foot-and-mouth disease, because we need a place to keep the mapping tables different (friendly) to the dimensions of accounts, to be able to load the data.
  
  My questions are; When loading the data, we should always map sizes? Is it possible to avoid it?
  
  For example, in the model, we have 300 accounts, 20 entities and 400 products. We need to map accounts because they are different for all entities (in the source data), but not products. That is why I want to avoid mapping products (and maintain this mapping) when loading the data. Is this feasible? Any ideas?
  
  Kind regars

  Only you can do that, if you need to your dimension product to identify the data point in your application target, it must be active and must therefore be sought.

• How to control the mapping of workflow?

  My OWB version is 11.1.0.7.0
  
  Workflow, here's what I want to do.
  
  When it starts, it runs 10 mapping (all are dimension) at the same time. After having managed 10 mappings,
  I need to execute the mapping of fact. Even a dimension ends, then, I don't want to start the mapping of fact.
  
  Currenlty, a mapping of dimension is stored procedure call. sometime, this mapping takes a lot of time and in fact mapping
  started to cool off before the end of dimension.
  
  How can I fix in the workflow?
  
  I thought to fix the image of the workflow... but we do not have the option to fix the image of workflow here.

  You can create it as below:

  http://blogs.Oracle.com/warehousebuilder/resource/temp_imgs/load_cube.jpg

• Download data without mapping

  We received a file that must be downloaded in Essbase by FDM, and columns and lines inside consist of dimension members that appear in Hyperion planning.
  
  We can download the data without creating a mapping in this case?

  Hello

  You must create an entry in the mapping that is SIMILAR for each dimension where both the source and the target are * (wildcard).

  When the data is imported in FDM she fills the fields in the tables of data such as ACCOUNT, ENTITY, segment UD1 etc. It then uses the mapping tables to fill in the translated example target ACCOUNTX, ENTITYX, UD1X etc. If you do not have this *: * mapping then when you import data in FDM he let these target fields empty and this are the ones that are used when you export data from FDM for loading in the system target (Essbase in your case).

  NB. target blank fields is also what causes the mapping error screens should appear when you import data manually to FDM (following the 'fish') by using the web client.

  There are examples of the latter as map entries in the Administrator's guide if you need.

  Hope this helps
  Stuart

• Windows 8 not to recognise or install USB devices

  Windows 8 will not recognize any device I plug.  Some devices operate independently of not having a driver installed as my Passport external hard drive and printer Dell.  I've tried three different USB, Sony, Cruzer Mini and Cruzer Ultra jump readers, all are not recognized, and I can't manually install drivers (if they exist for Windows 8) on these, or any other devices.  I also have a HTC 8 x Windows phone which she also does not recognize.

  I tried many solutions, including:

  • Uninstalling in Device Manager and reinstall
  • With the help of 8 all of my USB ports, including 3.0
  • A clean boot and install
  • Manual installation of the driver - device manager does not recognize the driver on my hard drive
  • Re-the drive mapping (to jump readers) - they do not appear on Drive Manager to remap
  • Reset the BIOS

  I'm at my wits end here.  I don't know how Windows 8 will not recognize anything, or that it doesn't seem to be a reasonable solution!  Help, please!

  Hi Matt,

  I apologize for the delay in responding to your request.

  In order to detect any what equipment connected to a port on a computer, Windows is based on the drivers or firmware that controls those ports. After reading your description, I think that 'all' the USB ports on your computer are unable to read the devices that you have mentioned and you already reinstalled all your drivers. Please let me know if it is otherwise.

  At this point, the problem seems to be caused by a lack or an incompatible driver. You must first with the computer or motherboard manufacturer to verify if a Windows 8 compatible chipset driver is available for your computer/motherboard model. If no Windows 8 compatible chipset driver is available, try to install the drivers for Windows 7 in compatibility mode in Windows 8.

  This is how you run a setup in Compatibility Mode:

  1. download the installation file, right-click on the file and click on Properties.

  2. click on the compatibility tab.

  3. Select the compatibility mode that you want to apply, and then click OK.

  4. then run the installation using the downloaded installation file.

  Let me know the status of the issue once you have installed the appropriate Chipset drivers. If you are not able to determine which driver you should install, let us know your computer or the name of the manufacturer and motherboard model number.

  Thanks and regards-

• Exchange rate

  Hello

  I understand that exchange rates will support two scenario first method is to load the exchange rate and another method sets the exchange rate grid...

  I am facing problems in the second method. I designed the form I selected the pov (pls see the screenshots) but when I chose the C1 and C2 dimension I couldn't able to see change.

  but when I insert the Exchange successfully... I can translate the data.

  I use the three currency which has been mapped in the currency and the dimensions of the entity...

  

  Hi Kimi,

  Yes, you are right.

  You must click the filter, and then select currency:

  

  This way, you will be able to see which currencies you loaded.

  See you soon,.

  Thanos

• Facts on multiple levels of loading

  Hello
  
  I have a cube with six dimensions. For one of these six dimensions I get data at all levels, so what I want to do is to load data at all levels and choose no aggregation of this particular dimension. I need the levels in this dimension because I have other cubes in AW even why I get only level data sheet for all dimensions. How can I load data at all levels for a given dimension?
  
  OLAP version: 11.2.0.3
  
  Thank you
  Dietsch.

  AWM, you should be able to drag the key column for the dimension of the fact at several levels of the hierarchy table.

  At the level of the XML, you should see elements in the cube like this plan:

  The MappedDimension attribute indicates to the server to load data to the LEAF_LEVEL only. So he could load at all levels, you can simply remove the line MappedDimension and re-create the cube. If you then look in the mapping AWM screen you should see MY_FACT. MY_DIM_COLUMN mapped to all levels within the MY_DIM. MY_HIER.

  There are a few cases where it won't work, so be warned! Here are a few I can think of.

  (1) If you have a MV on the cube
  (2) you are partitioning of the dimension
  (3) the mention of the CubeDimensionalityMap comes from the dimension table.

  Case (3) happens because users map to a column in a dimension table instead of a table column wwhen indeed they are on both sides of the join to the table. For example, if the table join condition is 'MY_FACT. MY_DIM_COLUMN = MY_DIM_TABLE. KEY_COLUMN"then some people map to the MY_DIM_TABLE expression. KEY_COLUMN instead of to MY_FACT. MY_DIM_COLUMN. If this is true, then you can simply change the expression to point to the fact column. A legitimate case of (3) occurs when the fact table contains data at a lower level (for example the DAY) that is loaded in the AW (e.g. MONTH). One solution is to create a VIEW that made the correct join and map the cube view.

• Values separated by using commas as separate dimensions

  Hi all
  
  We use text files as a data source for the update of database short. We add 4-5 properties in the text file. Each property has values separated by commas for example property name of category a category 1, Category2, category3... category10 values. I defined a dimension of my workbench short mapping the category property of the dimension short text file in the Workbench. But I want to than each of the categories to be dealt with as separate dimension for example values * "Category1" *, * "Category2" *... * "category10" * for the size of the category and not only ' * Category1, Category2,... category10 "* as value a single dimension. Anyone have any idea how to do it?
  
  Published by: user8540737 on June 26, 2012 13:49

  Thanks for your question.

  Your use case of reading in a list of values basket and want to these values be separated and mapped in one Dimension is very common.

  In your pipeline of short Developer Studio, you can easily add a new Record manipulator which fills a SPLIT to accomplish this function you need.

  You can learn more about the creation of a manipulator for registration in the [Developer Studio Help Guide | http://docs.oracle.com/cd/E28912_01/DeveloperStudio.612/pdf/DevStudioHelp.pdf]. You can also learn more about the syntax to create a SPLIT function in the [Expression Data Foundry Guide | http://docs.oracle.com/cd/E28912_01/DeveloperStudio.612/pdf/DataFoundryExpRef.pdf].

  For more convenience, a syntax example...

  
  
  
  
  
  

• Simple disjointed image gallery

  Initially, I created this gallery a simple page in GoLive. What is the best way to reproduce them in Dreamweaver (CS5)? Questions: by clicking on the thumbs, images with different dimensions loading to the placeholder without deforming, gray inches become when "visited."

  http://www.sonsmi.com/paintings3.html

  Good, your almost lost me (although maybe I'll know as soon as I'm just now digging)-"two swap" do mean you picture + button state?

  Yes.

  What is failback?

  When you use the behavior Swap Image, you have the option to do a restore automatic onmouseout.  Do not enable that.  Also, make sure that you apply the behavior to an anchor tag that wraps the images, not directly on the images.  Finally, you will need to pass the onmouseover to onclick event after applying the behavior.

  Another question about placeholder, making the "jump around" window, with dimensions of different image - some way to force the size of the window?

  In your page layout, that it won't matter because there is no content under/at side of the image, but if there was, you would see it pass as each new image was traded because of the different image size.  The way to avoid that must make the container for the placeholder, a fixed width/height, whose dimensions are larger than the largest image.