Feature search - replace in the custom sequence editor

Similar Questions

• Shift at the choice of the steps sequence editor

  Hello all-

  I run into a few problems these last time with the sequence editor (TS 4.1 / LV 8.6) where by selecting some of the steps will be literally up to 30 seconds to load (instead of dry normal 1 or 2)... it seems to affect niswitch associated steps most, but virtually all the measures seem to have a good time. It seems that this situation is aggravated if I shift-select many steps at a time - for example if I take 4 steps, he literally will pick up for 2 straight minutes before I can change the options for stage. Seqedit.exe takes 100% of the CPU during this time as well.

  I will add that I have in fact two identical configurations, and this affects only one of them...

  I think it's safe to assume that the sequence in fact probably one editor kind of research or something, but I expect that once the VI is loaded into memory (say niswitch.llb/connect channels), it would be fine for the rest of the time I spend editing... any advice on what exactly it is?

  other than this taking a lot of time, nothing is technically "broken" and my sequences work very well, but my development time is crazy now because I spend 80% of my time sitting to wait for the spring sequence editor to life!

  Thank you!

  -Kris

  If your screws have I/O controls connected to the connector component, you could be hitting the same problem described in this thread http://forums.ni.com/ni/board/message?board.id=330&thread.id=23845.  You may need to patch LabVIEW 8.6.

• How to disable ToolTips in the TestStand sequence editor

  Hello

  is there a way to disable these bubbles villain in the TestStand sequence editor.

  For example, when I want to spend a FileGlobal which is a string that contains a number and step requires the numerical value, I need to use Val (FileGlobals.NumberString) and answers

  as soon as I write ' Val ("a ToolTip appears and tells me what I can do. But so far, not the worst problem in the development process it may happen, that I have to change the FileGlobal

  and that's the point, when ToolTips turn evil.

  I'm starting to fix the names of the variables in the steps and each time this nasty giant bubble. It is not only unnecessary, but also incredibly annoying at the moment.

  I really hope that there is a parameter that could help me or that developer NOR esteem team to add the posibility to disable these tooltips.

  PS: maybe not completely necessary to disable ToolTips, but perhaps to make their tiny and if the programmer is really interested in the content that could be extended by a click.

  I use TestStand 2013 and TestStand 2011.

  Thanks in advance

  Manfred

  I think what you describe is the function "Tip." You can stop these appear automatically.

  The setting is located in the Station Options > Preferences > Expression editing Options

  My screenshots are from 2014, but it's the same on 2013. Not sure about 2011.

  

• Add search criteria to the customer Search Page

  Hi all

  I have a requirement to add additioinal search criteria to the customer search page. Order Management Super User-> client-> Standard

  / Oracle/Apps/AR/cusstd/srch/WebUI/ArPrtySrchPG

  
  

  I want to add number of Site Search additiional. I tried to add a lookup field using customization, but the addition of the field does not appear on the screen. I tried to find out how the where clause is implemented through the related CO I found that the search fields are implemented using a matching HZ_ORG_SIMPLE_SEARCH_RULE rule.

  
  

  Is it possible to add the additional field matching this rule? Otherwise how can I advance to this requirement? Please suggest

  
  

  
  

  Thank you

  Pravin
  

  Found the solution...  Adding that it might be useful for others...

  Steps to follow:

  1. create the custom match rule by copying standard.

  2. add additional fields to the matching rule and specify a transform.

  3 compile the custom matching rule

  Finally, update the profile option to point to the custom matching rule. In my case it was HZ: associate the rule for the Simple and HZ research organization: associate the rule of advanced search for organisation

  Thank you

  Pravin

• How can I make a long list of search - replace only the master

  Hello world

  I had this script:

  //---------------------------------------------------------------------------------------- -------------------------------

  myDocuments var = app.documents.everyItem ();
  var myLayers = myDocuments.layers.everyItem ();

  Locked text on master blocks spreads are not affected.
  If you want to unblock, please add something like this:

  Unlock all elements of each document page on is spreading and Captain spreads (optional):
  myDocuments.pageItems.everyItem (.locked = false);

  var myPageItemsOnNormalSpreads = myDocuments.spreads.everyItem ().pageItems.everyItem ();

  Unlock the layers (optional)
  myLayers.locked = false;

  Lock all elements of page level first on normal spreads
  This leaves the elements on the page on unlocked master spreads:
  myPageItemsOnNormalSpreads.locked = true;

  Now for the GREP part:
  app.findChangeGrepOptions.includeMasterPages = true;
  app.findGrepPreferences = changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "\\b20\\d+\\b";

  Research on "all open document" level
  Which returns an array of arrays:
  var myTarget = myDocuments.findGrep ();

  Flattening of myTarget Bay:
  var flattenedFoundArray = [];

  for (var n = 0; n < myTarget.length; n ++) {}
  flattenedFoundArray = flattenedFoundArray.concat (myTarget [n]);
  };

  Change the content of the texts found in flat table:
  for (var n = flattenedFoundArray.length - 1; n > = 0; n-) {}
  flattenedFoundArray [n] .silence = String (Number(flattenedFoundArray[n].contents) + 1);
  };

  Unlock all objects on normal spreads:
  myPageItemsOnNormalSpreads.locked = false;

  Reset search GREP and edit the prefs:
  app.findGrepPreferences = changeGrepPreferences = null;

  //---------------------------------------------------------------------------------------- -------------------------------

  made by Uwe

  I change in this, to make a multi elements of search - replace only the master

  //==============================================================================

  myDocuments var = app.documents.everyItem ();
  var myLayers = myDocuments.layers.everyItem ();

  Locked text spreads masters frameworks are not affected.
  If you want to unblock, please add something like this:

  Unlock all items page of each document of spreads and master spreads (optional):
  myDocuments.pageItems.everyItem (.locked = false);

  var myPageItemsOnNormalSpreads = myDocuments.spreads.everyItem ().pageItems.everyItem ();

  Unlock the layers (optional)
  myLayers.locked = false;

  Lock all elements of page level first on normal spreads
  This leaves the elements on the page on unlocked master spreads:
  myPageItemsOnNormalSpreads.locked = true;

  Now for the GREP part:
  app.findChangeGrepOptions.includeMasterPages = true;
  app.findGrepPreferences = changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "USA";

  Research on "all open document" level
  Which returns an array of arrays:
  var myTarget = myDocuments.findGrep ();

  Flattening of myTarget Bay:
  var flattenedFoundArray = [];

  for (var n = 0; n < myTarget.length; n ++) {}
  flattenedFoundArray = flattenedFoundArray.concat (myTarget [n]);
  };

  Change the content of the texts found in flat table:
  for (var n = flattenedFoundArray.length - 1; n > = 0; n-) {}
  flattenedFoundArray [n] .silence = "CHINA";
  };

  Unlock all objects on normal spreads:
  myPageItemsOnNormalSpreads.locked = false;

  Reset search GREP and edit the prefs:
  app.findGrepPreferences = changeGrepPreferences = null;

  
  //---------------------------------------------------------------------------------------- -------------------------------

  myDocuments var = app.documents.everyItem ();
  var myLayers = myDocuments.layers.everyItem ();

  Locked text spreads masters frameworks are not affected.
  If you want to unblock, please add something like this:

  Unlock all items page of each document of spreads and master spreads (optional):
  myDocuments.pageItems.everyItem (.locked = false);

  var myPageItemsOnNormalSpreads = myDocuments.spreads.everyItem ().pageItems.everyItem ();

  Unlock the layers (optional)
  myLayers.locked = false;

  Lock all elements of page level first on normal spreads
  This leaves the elements on the page on unlocked master spreads:
  myPageItemsOnNormalSpreads.locked = true;

  Now for the GREP part:
  app.findChangeGrepOptions.includeMasterPages = true;
  app.findGrepPreferences = changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = 'Washington DC';

  Research on "all open document" level
  Which returns an array of arrays:
  var myTarget = myDocuments.findGrep ();

  Flattening of myTarget Bay:
  var flattenedFoundArray = [];

  for (var n = 0; n < myTarget.length; n ++) {}
  flattenedFoundArray = flattenedFoundArray.concat (myTarget [n]);
  };

  Change the content of the texts found in flat table:
  for (var n = flattenedFoundArray.length - 1; n > = 0; n-) {}
  flattenedFoundArray [n] .silence = "Beijing."
  };

  Unlock all objects on normal spreads:
  myPageItemsOnNormalSpreads.locked = false;

  Reset search GREP and edit the prefs:
  app.findGrepPreferences = changeGrepPreferences = null;

  
  //===============================================================================

  only what I can do is to repeat and repeat again

  is this another perfect solution to do?

  Thank you

  Teetan

  Try this,

  findChange("USA", "CHINA");
  findChange("Washington DC", "Beijing");
  
  function findChange (findWhat, changeContent){
      var myDocuments = app.documents.everyItem();
      var myLayers = myDocuments.layers.everyItem();
      //Locked text frames on master spreads are not touched.
      //If you want to unlock them you have to add something like this:
      //Unlock ALL page items in every document on spreads and master spreads (optional):
      myDocuments.pageItems.everyItem().locked = false;
      var myPageItemsOnNormalSpreads = myDocuments.spreads.everyItem().pageItems.everyItem();
      //Unlock the layers (optional)
      myLayers.locked = false;
      //Lock all first level page items on normal spreads
      //That leaves the page items on master spreads unlocked:
      myPageItemsOnNormalSpreads.locked = true;
      //Now for the GREP part:
      app.findChangeGrepOptions.includeMasterPages = true;
      app.findGrepPreferences = changeGrepPreferences = null;
      if(findWhat)app.findGrepPreferences.findWhat = findWhat;
      //Do the search on "all open document" level
      //That will return an array of arrays:
      var myTarget = myDocuments.findGrep();
      //Flattening the myTarget array:
      var flattenedFoundArray = [];
      for(var n=0;n=0;n--){
          if(changeContent)flattenedFoundArray[n].contents = changeContent;
          };
      //Unlock all objects on normal spreads:
      myPageItemsOnNormalSpreads.locked = false;
      //Reset GREP find and change prefs:
      app.findGrepPreferences = changeGrepPreferences = null;
  }
  

  Vandy

• Settings pane in the stage custom sequence editor

  I'm trying to implement a custom user interface that is similar to the examples given by NEITHER. What I miss, however, is the part of the parameters of the step. I can change the parameters of the step of the example with the Edit menu > settings step dialog box, but I would have a section on the window, similar to what you see in the full version. I thought it would be as easy as inserting a component to insert, but it is not... Did anyone have an example of the implementation of this component?

  Hi paicolman,

  At this time the property pane of the step in the sequence editor is built in editor sequence and, therefore, only available in the sequence editor not in the custom operator interface.

  The reason why one in the sequence editor looks different is because it is a more compact design, so it could easily fit into the sequence as a component editor and not another pop-up window. The OI is a pop-up window, so it shouldn't be so small and compact.

  If you want to change the step properties dialog box, you will need to completely build your own dialog box and change the reminder that connects the kind of command. It would be quite difficult to implement, so using the default dialog box is recommended.

  Greetings,

  Cheggers

• Application updates in bold and in italics while doing a search/replace on the contents of merged data

  Hello
  Wonder kind knowledgeable people if you can help me with a question find/replace.

  I'm doing a fusion of data of book content in indesign, where my data merge file is a simple text csv file that is delimited by tabs. I have two things (almost like here) I would like to make to specific parts of the text, but do not know how to achieve this.

  -First of all, I would like to preserve the words/phrases of form 'italic', but it's obviously lost in a csv file.  Is there anyway that I can mark these words so a search/replace can make this italic of the word.  Im hoping that there is a solution that looks something like this;
  for example.  Content of the book is 'the italics of the word needs to be adjusted.
  Original content is modified to be "the word $Italic $ $ needs to be adjusted", so that a dollar sign encapsulates the word in italics.
  Then I am able to merge data from the csv file and somehow make a search/replace words/phrases that are wrapped by the dollar sign.  So, do a find/replace all the words/phrases that satisfy this condition and then apply italic to all the words between the dollar signs.

  -My other question is that I use the ' |' character in my text to determine paragraph separators.  I then do a find/replace after you import the text to replace all occurrences of ' |' for the paragraph separator (a kind of symbol $, a representative character in the menu drop down to the right of the change to). It works fine, but I would like to make a "BOLD" format paragraph separator so that it can better distinguish the separation of text sections.

  But this is different from my problem "italic" above, since I am trying to apply a "BOLD" format to the character "change to", rather than something that exists in my original csv.

  Hope I think, but I'd be happy to provide you with screenshots etc. (when I get home at )
  Best Rgds
  L

  two solutions.

  for the solution of italics, I would say that the OP has answered his own question with one exception - do not use the symbols dollar, instead use = or another character that is not reserved by GREP.

  the solution I would use for italics would be a GREP search once the merger completed. Take a look at the picture to see what I did.

  

  the second solution: styles GREP.

  This means that the text will have a paragraph style are entrusted to him. make a style and character called "BOLD" in this style, the only thing to change is located in basic character formats, set the bold font style. might even make the character another example cyan color is more easily strucure.

  Then go to the paragraph style options, click on GREP styles and correspond to the following screengrab

  

  the advantage with a GREP style is that once the vertical bar (|) is replaced, the GREP style bold is lost; and that means less post processing and not needing a second search of the text - it's all living.

• Scripting - reference control Replace inside the flat sequence

  Hello

  Just in the process of upgrading our software from 8.6 to 2011. A question that we have is references appear to be different to the old code. Example - if we create a new control reference, put it next to the old one, put a probe on the two, references do not match when we run the vi.

  This causes havoc with our very large amounts of code. We contacted OR that our support subscription and they required an example which we can really give.

  In any case...

  I thought that I would write a vi script to replace all old references of our code with new references.

  Problem is that I can't replace a control easily reference which is inside any kind of structure.

  I need a way to get a reference to a parent structure, I can then add to the structure.

  This will take place on large amounts of complex code, so there need to be versatile. Please see the attached Vi

  Thank you

  Joe

  I would like to make the following changes:

  

  • You'll want to use the 'Move' method, which allows you to specify an owner.  In this case, the owner is the schema that belongs to the original control reference.
  
  
  • You want to get the original order wire and get all its wells (i.e. not null index into the array of terminals), so that you know what to wire the new benchmark in control of.  That is why the Connect wire method is in a loop For... the original control reference may have wired to several objects.

  Let me know if you have any other questions.  As far as I know, all properties/methods that I am using the code above are available in LabVIEW 8.6.

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• Search &amp; replace history in illustrator

  How to maintain search & replace history, when I quit illustrator and open search & replace history disappears

  

  @

  But you could add 'save queries to search/replace' in the feature request form, and maybe we'll get it in a future version. Feature request/Bug Report Form

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• Replacement of the CPU

  Just curious.  The CPU is a replaceable unit by the user, or is it welded in place?  HMM seems to indicate that it is a fairly simple replacement, but I was wondering if someone here had tried it.

  Thank you!

  T400 spare parts for the system

  Do VINTAGE, you will see either *, *, or N.

  N = not a replaceable component by the user

  • * identifies the parts that are fairly simple to replace, requiring few tools or not. [Customer replaceable]
  • * identifies the parts that are a little more difficult to replace. [Customer replaceable]
  • N identifies the parts that should not be replaced by the customer. [Only replaceable by the lenovo service]

  All components have a FRU part number which I think might have confused you.

• Find and replace in the script editor

  I wonder if there is anyway in the script editor to perform a search and replace?  I can do a find by pressing cmd + f then if I hit shift + tab, I can stick it to the highlighted area which is great for a couple, but when I have a bunch of stuff is a pain.  I want to just do a replace all in the editor.  I can cut and paste the script in the editor for this, but I hope there is a key combination which makes appear a replacement all the dialogues.

  Unfortunately there is no gimmicks to replace. It's just not there.

  Another feature request Paul!

  Christophe.

• Replacement of the controls from a custom palette gives poor control

  I customized my palette of control system style with a few additional system style controls (tables, clusters, channels DAQmx etc.). Everything works fine when I place a new control on a vi FP, but when I try to replace an existing one I control sometimes get control, depending on whether the scheduled replacement comes after my additions in the file of the custom palette.

  The following sequence of images shows the bug.

  

  Speculate, I would say that looks like replacement who fell is the control that occupies the site because the desired control was in the original palette file (i.e. LabVIEW seems to be getting control of the writing, but then he indexation of pallet uncustomised file.)

  Are workarounds - learn the mapping between the selected replacements and unmovable and not to customize the palette file. None are particularly desirable.

  Hello

  I've found a workaround. After inserting my custom control, got a palette edit discovers that looked like this:

  

  Then I rearranged it and remove empty lines/locations:

  

  And it works normally. Please could you try yourself?

  I hope this helps!

• How can I get the feature 'Launch' catalog portal on the customer portal?

  Hi all

  I hope it's an easy question for someone more technical than me...

  We use v9.1.4 catalog portal and as the link to 'Launch' on the VM details screen, which allows the user to launch a virtual machine directly in the console.

  What we do not like, is that we cannot mark the portal catalog...

  We love the features of the customer portal and its "brandability", but we do not like that you can't launch a virtual machine shape...

  How can I copy the CatP to "Launch" feature to the CustP?

  I had a quick glance in the html code, but I couldn't see anything obvious - I'm not a very technical person! When I looked in the screen Designer, I can see the "Launch" button and the link on the Config Item details for the virtual machine screen, but its not editable. I do not see in it at all in the active Portal Catalog screen...

  Would be a good wanting someone to point me in the right direction?

  Thank you very much

  H

  It seems that you need to replace LiteAssetReview_VM.js

  function ShowHideConsoleButton()
  {
   if ((!jQuery.browser.msie && !jQuery.browser.mozilla) || jQuery("#CATALOG_PORTAL").val() != "True")
   {
   jQuery("#LaunchContainer").hide();
   }
  }
  

  Create a Custom_LiteAssetReview.js and add this in

  function ShowHideConsoleButton()
  {
   if ((!jQuery.browser.msie && !jQuery.browser.mozilla))
   {
   jQuery("#LaunchContainer").hide();
   }
  }
  

  I have not tested this, but I guess that if you uncheck the box for catalogue it will appear on the customer portal.