RALink rt5390r wireless guard give up the connection

Similar Questions

• WRT160Nv2 guard give up the connection

  I've been running this router for about 6 months now, and now the problem becomes unbearable. I installed LELA on all my computer last night finally and I see when my connections drop it now. I can surf, all right, and I start to get page not found or not connected to the internet error.  I'm currently running 1 Wired, wireless 3, XBOX360 1.  The XBox NEVER drops connection, NEVER drop the CPU compared to Yahoo Instant Messenger and surfing capabilities let computers and page timeouts. Before installing LELA I had to unplug and reconnect the router every time that he did. Now the duty rate is about 4 to 6 times an hour. Then someone please help me, I'm totally lost. I went through the technical support of comcast already and they say that, because I can get on the game and messenger service that it is most likely router problems.

  There are several work around this problem, and I hope others after their solutions. I had exactly the same problem with my router and here's how I solved it;

  First of all, I downloaded a new version of the firmware, but it doesn't stall now. Secondly, I did a reset / / 30/30 30 router, here is the complete procedure

  1. connect the computer via a cable to the router cat - make sure that you can 'see' the router via a browser @192.168.1.1

  2. with the power to the router "on", press the button of reset for 30 seconds - do not stop pressing to go to step 3

  3. While pressing the reset button, unplug the power supply of routers, wait 30 seconds - you don't need to go to step 4

  4. While pressing the reset button, plug in the router to the power source, wait 30 seconds and release the reset button and wait for the router to return online

  5. access to the router through the web interface @ 192.168.1.1 - admin is the password (you probably know )

  6. install the new firmware (administration tab > firmware update)-if successful, you will see the reviews, if not repeat steps above.

  7. Repeat steps 1-5

  8 access to the new router via web interface to reconfigure your settings for your network and your ISP and leave all the others in mode by default - except one, on the configuration tab, change the Keep Alive: reminder from 30 seconds to 20 seconds time.

  Before you implement this, my router dropped the connection for laptops wireless several times a day, because I did this procedure, not only once!

• WNR3500 guard give up the connection in California

  OK, I called TWC cause I keep losing my connection to the net, I have a router WNR3500 w / the latest firmware, I can't find anything more recent, I use Netgear for years, said TWC this only affects those whose routers Netgear in California, I run cable Cat6 and have a 1 Gigabit connection, my modem is a Motorola SB6121 Docsis 3.0 modem and my connection is 20/2. NETGEAR is working on a fix?

  The abandonment of the connection, they told me applies to all routers Netgear to California on the TWC system...

  OK I think this can be marked as resolved, I had a tech call me BC, he crossed the router and I settled on changing the settings DNS to Open DNS for the primary (208.67.222.220) and Google for the scondary (8.8.8.8), almost 2 hours have passed and I think it's a success, no new firmware is required , is for a good all in a new router, probably not before that let's go, I'm sure this will be my last post in this thread.

• Server to the House Acer Aspire H341 guard give up the connection and I can't access the files.

  The server worked flawlessly for 2 years.  Now it the intermittent connection.  When I try to back up a computer on the server it the backup starts but stalls and I get an error message saying that there was a problem with the software of server connection.  I reinstalled the software of connection to server with no improvement.  Restart the server generally means I can access the files again, but it will still drop the connection.  The same problem occurs on all five connected computers.  All running Windows 7 family 64 or Windows XP.  I did have a backup successful PC in two months. I am desperate for help.  Had the server in the computer store and they could not in the absence of it.  They had to install the software of my original disks, so I wonder if it's an automatic update (including the computer store would not, by returning to the original disks).  Everyone suffers from the same issue?

  Unfortunately he wa a sign of a failure of network card.  As it was an integral part of the unit, replacement was more expensive than the original server.  So I bought a new server.  He has managed to move the hard drives on the new server.

• WiFi guard give up the connection on Inspiron 11 3000

  Hi, I use laptop Inspiron 11 3000 with windows 8. I am facing problem with wireless connection. It is unplugged, it takes up to 5-10 minutes to reconnect again.

  I have the drivers installed on my system.

  Driver: Dell 1708 802.11b/g/n (2,4 GHz) wireless
  Seller: Broadcom
  Vendor: Broadcom
  Date: November 11, 13
  Version: 6.30.223.201
  INF file: C:\Windows\INF\oem62.inf
  Files: total 4
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\bcmihvsrv64.dll
  C:\Windows\system32\bcmihvui64.dll
  C:\Windows\system32\drivers\vwifibus.sys
  Type: Wi - Fi Native Driver

  Please give me some solutions. Thanks in advance.

  param3sh,

  Please continue with Jesse.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Go to start > Device Manager > advanced > bandwidth capacity > change to 20 / 40 mhz

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• WNR3500 guard give up the connection

  Every 4 or 5 days my WNR3500L removes the internet connection and wifi connections.

  I run with the V1.2.2.48_35.0.55 firmware (latest).

  When I pass the power and the new router works again.

  Can someone give me some advice?

  Hi, it helped to downgrade the firmware version, as described above.

  I switch off the settings to install the latest firmware.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Satellite M60 guard give up WiFi connection

  An M60-144, I provided one of my clients has problems with its WiFi connection. It will be ok for 5 to 10 minutes, and then suddenly will drop the connection. Turning off the WiFi and back on again remakes the connection and everything is very well for 5 or 10 minutes.

  The access point is a Draytek Vigor 2600 G and there are other laptop (Portege R100, R200 Portege and Tecra 9000 Tecra A2) that all connect to the same access point to the same place without any problem. The AP employs 128-bit WEP encryption runs in mode 11b and 11g of mixtures. Any other potential sources of interference, for example the DECT phones have been rejected.

  The laptop has all the updates of Windows applied and drivers the most recent site. For me, it screams of a hardware problem with the wireless card, but wanted to know if there are other suggestions first?

  Hello

  I read a few topics on similar problems and in most cases, the update of the WiFi pilot solves the unstable Wi - Fi connection. As far as I know on the Intel Web site you will also find a newer version of the driver. In my opinion, you should check this option.

  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Best regards

• I do not find any network wireless icon or on the connections of network or the system tray?

  I had a wireless network icon in the system tray and my network earlier connections. I replaced my with a different user account (I deleted the previous). After the opening of the new account, there was no icon on the system tray wireless network, or in the my network connections. I tried setting up of wireless connections, but that does not work either. I use WINDOWS XP. What should I do? It could be a problem of drivers not installed. If so, please tell me where to download them (just send me the link). Tell me what to do in Windows XP.

  If you use Windows XP, you will need to ask your question in the forum network XP here: http://social.answers.microsoft.com/Forums/en-US/xpnetwork/threads Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• HP Pavilion g6-2267: Ralink RT5390R 802.11bng driver of the network adapter

  HP Pavilion g6-2267sa Notebook PC

  Model #: C5J53EA

  Hi, for the past few weeks my network adapter drops connectivity at any time and the only way it can be "solved" by deactivation/activation of the connection but even that does not always work. Or restart the laptop. From time to time, it disappears from the Device Manager too.

  I tried to uninstall the driver (sp66805) and reinstall also roll back, but always without success. Not sure if I install the wrong drivers or not or if my adapter fails slowly. As a last resort, I've changed the black and grey cable to the adapter that allows a certain driver (sp64950) to work for about 5-10 minutes once before needing to be reset.

  The hardware ID:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Thank you

  smartiemeup

  disable the Smart Hub setting is the solution (ranging in configuration and disabling settings advanced, Smart)

  Please close the case of the support

• my computer dell laptop was connected to my wireless router, and now the connection is broken ittslef

  I have 2 computers connected to my router wireless #1 is a new satellite Toshiba 2010 and has no problem connecting...

  #2 is a an old dell Latittude D 520...

  It was working fine and connection with a problem and now does not connect to the network...

  I tried the WiFi wireless lan utility Dell and MS WZC... without success...

  The network is no more be authenticated...

  And it does not acquire the network address...

  When I select the icon for network address, which was there before. is now defunct.

  My icon Dell said acquiring and my router icon indicates authentication...

  Then, login unavailable...

  Hello

  ·         You receive an error message or error code?

  ·         What service pack is installed on your computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you read the article knowledge base Microsoft and check below.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

   

  Method 2: You can also read the article and check if you can connect to the wireless router.

   

  You cannot connect to a wireless network access point that uses authentication shared from a Windows XP-based computer or a Tablet PC Windows XP Tablet PC 2005 Edition

  http://support.Microsoft.com/kb/884787

  Let us know if that helps.

• Wusb300n w / WRT160Nv2 - unusable! Give up the connection again and again

  I spent at least 16 hours trying to get my to work with WRT160Nv2 WUSB300N

  firmware on router is v2.0 02 last, latest drivers: ftp://ftp.linksys.com/downloads/NA/drivers/WUSB300N_20071204_dr.zip

  I use windows zero Configuration tool.  wireless monitor not installed as it was unusable.

  I can connect to the AP perfectly, but no matter what time, I try to upload a large file, say more than 10 MB, it disconnects.

  It appears after a certain amount of data is transferred, whether by downloading a large file or not, it disconnects

  This product is totally unusable.

  I've tried everything

  Current settings:

  WPA psk / tkip

  mode: joint

  the standard 20 mhz band radio (only other option is automatic)

  broad channel: 3 (grey outside, I can't change that)

  standard channel: 11

  When I tried to put the 3 above options auto same problem

  evolution of the rts and fragmentation threshold threshold did not help

  network configuration: wireless access point is 10.191.191.253 acting as a switch, connect a switchport to the Firewall ASA 5505.  DHCP is granted to ASA and disabled dhcp a wireless access point.

  again, everything works well in terms of access to the internet but connection is to move after a certain amount of bytes sent =)

  Please advise...

  Thank you

  There must be a bug in WPA PSK personal... as soon as I switched to WPA Personal 2 all problems went away.

  Is this a known issue?

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions