Similar Questions

• X 250 SIM not recognized (new)

  I recently acquired a X 250 Thinkpad for work. That the work takes me outside the Wifi areas, I also acquired a SIM card to use with the EM7345 integrated. However, even if that worked originally (I inserted the card, he acknowledged, I changed the PIN code), the laptop no longer recognizes the sim card when it is inserted.

  The solution suggested in another thread (enable WWAN in BIOS) does not apply to me, as it is activated.

  My SIM card works in other devices, however, the different SIM cards are also not recognized. Any ideas?

  I switched to Windows 7 preinstalled for Windows 10, change of PIN was already in Windows 10, so I doubt that it had nothing to do with it.

  Man, I feel stupid now. There are three different places to turn off WWAN in Windows 10. And of course, you will need to check each of them... So long story short - I can connect now, but the update of the firmware, however, does not offer an update. In addition, he has apparently E-plus, not o2.

• Laptop had motherboard replacement and now Windows 7 is not recognized as authentic.

  Laptop computer had mother board replacement and format hard drive.  Store replaced windows 7 starter edition, but it is not recognized as authentic, help!

  Heh - I know the feeling :)

  Ok...

  Click on the early roundel

  in the search box, type

  SLUI 3

  and press the Enter key

  This starts the wizard change the product key.

  Follow the instructions.

  The key you need is on a COA sticker that is attached to your machine - for examples, see http://www.microsoft.com/en-us/howtotell/Hardware.aspx

  It is in the format AAAAA-BBBBB-CCCCC-DDDDD-EEEEE-FFFFF

  Do not enter dashes - the machine that will do this automatically,

• Not recognized, yet all the numbers!

  My printer HP Photosmart C4400 all-in-One Series, model HP Photosmart C4480 has a number more than talking about the page How To and the video.

  Yes, the printer is actually in production (2008?) but I've only used out-of-the-box for 4 months in 2012 and then he is back in stock.  I just he carried out of the box, about a year later and of course had to install new ink.

  I wanted to check the printer was recorded (it is) and see if there are new driver updates, etc..

  and try to find out if it is to be on the noisy side is correct.

  I also need to know why, when I choose 'Set up', I got a window saying my device is not recognized, even if it is here, in the computer.  I can see it in the dock (MacBook Pro).  I wanted to do once more the printer by default - I had been driving on a friends through his cannon.

  Sticker on the bottom of the printer, left of the connecting cable has a number of "CN946M"... "more the barcode and the words"product of China ". On the right side of this vignette even longer numbers, which reads Q8383-6... [32].
  Then, on the bottom, to the front there is ANOTHER sticker that, aside from logos miners, gives the "regulatory model number", read "SNPRB-00"... ' and another number, the number of the product warranty, also begins with Q838, BUT this is different: "Q8388A.  NOTE: the other number (above) read 8383
  Above this vignette is a barcode with "Q8388 6"... "Still has another, different number and the words"Product of Singapore"
  On my 'Start Here' literature, there is a barcode at the bottom right that reads in part Q8383-9...

  then, friends of HP, which number is which?  And this a C-4400 or a C4480 printer?  And given that the warranty has expired for a long time even if its use is only 6 months old and the fact that I'm not "with it" with all the techno jargon (I had to seek that meant :-) OCR I would also like to know where to go (the lists are so long) for easy to request assistance.

  Thank you!!!

  Hi Cloudrowdy,

  I know by looking at the stickers on the printer can sometimes feel like watch the alphabet soup.

  Your product number is Q8388A, the printer is the all-in-one HP Photosmart C4480. The c4480 belongs to the serious c4400, I call the c4400 family and thinking about the c4480 as a cousin.

  The prescribed number is just a number of marketing necessary to make you worry about. The only other number may never need to is the serial number. Because the printer was made in China, the serial number will begin with CN and you should never the first 10 digits. I say this because it can be 14 digits in the serial number. Once again, alphabet soup! For security, I do not recommend that you never post your serial number on a public forum.

  Here is a link to HP Photosmart C4480 all-in-one printer support.

  This link will give you information for:

  • Drivers
  • Solve a problem
  • Getting started
  • How
  • Product information
  • User guides

  I hope it's useful. If there is nothing else or anything more specific, you want to help do not hesitate to inform MB.

• drive hard Seagate usm is not recognized by the computer.

  Windows 8 does not recognize my portable hard drive Seagate USM when I insert into the computer Bay USM.  The computer is a new Lenovo K450 Windows 8.

  Thanks Ronnie,.

  I contacted Lenovo on the K450 and they said that their computer would only recognize drives of 500 GB USM and mine are 1 TB.  I asked if he would support the discs from 1 to 2 to in the future and they said that it is not in their plans.  Meanwhile, my Seagate drives will connect via cable USB3 Lenove USB3 ports.

  Ken

  I have a K450 and thought the slot of USM was in not recognizing my Seagate Backup more 1 TB drive as well.  Then I found another similar post elsewhere and the solution is to enter the upper part of the computer and push harder!  It feels as if it was there when it really is not completely.  My 1 TB works fine now.  No idea why someone said there is a limit of 500GB.

• iTunes not recognizing iphone

  Hey guys, last updated itunes is not recognizing my iphone.

  Uninstalled and reinstalled iTunes several times, everything is up to date. I also tried the thing of driver device manager update, but the apple usb driver is not present even after I have reinstall and uninstall iTunes, all solutions? p.s Also running windows 10.

  Hello, you should see this article, it will help you If iTunes does not your iPad, iPhone or iPod - Apple Support

• My IPhone 6 is not recognized by my IMac

  My IPhone 6 is not recognized by my IMac

  What operating system do you use? If you mean that it is not recognized by iTunes and you use 10.7 as your profile is displayed, you will need to upgrade your operating system to get the latest version of iTunes.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Updated itunes 12.5.1 and iPhone not recognized now

  I upgraded to itunes 12.5.1 and now my itunes does not recognize my iphone when it's connected.  I have a new laptop with Windows 10.  Can anyone help please?  I want to save my phone before I upgarde to the new iphone 10.0 software.  Thank you!

  Hey cbaron12,

  Thank you for being a part of the communities of Apple Support.

  I understand that your iPhone is not recognized in iTunes on your Windows PC.  It of a good idea to always backup your iPhone, so in order to get this problem solved, please follow the steps in the link below.

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• iPhone, iPad Air 2 not recognized by iTunes

  Very frustrated right now. Given that Apple's Support is not in contact with return despite requests, the story will go here. I have Windows 10, iPhone 6 + and iPad Air 2. Last weekend I was invited to and did pass to iTunes 12.5.1.21. Plugged my iPhone 6 +. Not recognized by iTunes; 'sync' gray. Tried the same thing with my iPad 2 Air. Same result. I get no error message.  Here are my troubleshooting - what I'm missing, Apple?

  1. Lightning card Checked, works fine with other devices.
  2. Rebooted PC.
  3. Rebooted IPhone.
  4. Restarted iPad Air 2.
  5. I've tried different start up sequences (start iTunes connect manually; first)
  6. Went to 'Upgrade device via Device Manager' - these devices are working properly.
  7. Updated my iPhone and iPad 2 air for iOS 10 successfully.
  8. Apple email support; 48 hours later they gave me another email address for contact.
  9. Chose the Contact Apple Support via phone option - screen "we will call you - your phone will ring at any time.  Still waiting for the phone to ring.
  10. From Discussions on Apple's site with troubleshooting tips, have tried all suggestions with no luck - If iTunes does not recognize your iPhone, iPad or iPod - Apple Support.
  11. I even opened and closed the blinds completely throughout my house to see if that would help.  Go figure.
  12. The last resort on them, says "Contact Apple support" - see #9 above.  Twice.

  Apple-Support - What should I do at this point?  I'm all ears, and Android is looking better and better during my next upgrade.

  Happy to report that I finally found a position that has fixed this. Someone has to give Community contributor turingtest2 a price, they had an incredible post in communities that have corrected my problem.  See below for the excellent suggestions.

  iOS device do not show in iTunes for Windows

  iOS device do not show in iTunes for Windows

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• After upgrading to itunes 12.5.2.1 my iphone is not recognized as a device in itunes

  After that I upgraded to itunes 12.5.2.1 and IOS 10 September 14 my 6s iphone is not recognized as a device if I sync my PC with Windows 10 on it.

  Help, please.

  Any body else with the same problem?

• My program iTunes windows is not recognizing my iPhone more than 6 s

  I have installed ios 10 but my iPhone 6 s more is stuck in recovery mode and my iTunes account is not recognizing the device to complete the update or restore.

  The first thing to do is to make sure you are using iTunes 12.5.1, like this version, released on September 13, 2016, are the first to recognize and prepare for iOS 10 version.

  Next:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• OTG not recognized by iPhone device

  I use iPhone 6 s. so I bought the key USB OTG NK890 (32 GB) model. This device works correctly with i-FlashDevice until recently. but now, it is not recognized by my iPhone. He'll show a massage error as shown in the picture.

  Pls comment what is the error of this & how do I fix this? ???

  My iPhone 6 s

  iOS 9.3.4

  

  Hello

  Apple recommends to use only Apple original accessories or accessories of third party Apple has certified under the program of the IFM. Using an accessory of uncertified lightning can cause problems with including your iPhone becomes damaged.

  Accessories from third-party certified for iPhone come with the logo "Made for iPhone" on the product and/or packaging.

  Also note that the Apple warranty does not cover damage caused by the use of your iPhone with a third-party product that does not meet the specifications of Apple.

  More information:

  Identify the fakes or not certified Lightning - Apple Support connector accessories

• Firefox 43 - Netflix - not recognized Silverlight, does not.

  Using Windows 7 64-bit SP1. Using Firefox 43 32 bits.

  After the upgrade to Firefox 43 Netflix doesn't recognize of Silverlight and the forces of reading in the built-in player to HTML5. HTML5 player uses 90% cpu and therefore unusable. Tried the usual solutions: clear the cache etc. uninstalling, re-installing Silverlight; turn it back on. Silverlight is still not recognized or work. Tried the Microsoft test site. Says that Silverlight is installed and running. I tried Netflix in Internet Explorer. Siverlight works.

  I need one of two solutions: (1) work Silverlight; or (2) use HTML5 player with a CPU use moderate.

  Thank you.

  Thank you. Change the user-agent string might work, but I don't want to change the headers.

  Bottom line from my perspective: Silverlight cannot be used in Firefox 43 with Netflix. The change was not documented or communicated in the release notes December 15. The above blog ads were released on 17 December and State single reading HTML5 is available, which is different from saying that Silverlight is not available.

  My time has been lost for stupid reasons.