Fehler beim co-chair der speaker: 12 (cannot allocate memory)

Similar Questions

• Cannot power on VM - cannot allocate memory

  I started to see this random question on VM on our companys (3 guests) ESX cluster. I had to stop working on this cluster until we can solve the problem

  I encountered a similar problem before that related to snapshots, but this problem occurs on machines that have ever been instant and in the past, had been working perfectly.

  An excerpt from the log file of the VMware virtual machine:

  2013 07-09 T 00: 41:32.918Z | Worker #0 | I120: DRIVE: OPEN scsi0:0 [' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.918Z | Worker #1 | [I120: DRIVE: OPEN scsi0:1 ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: FileIOErrno2Result: unexpected errno = 12, cannot allocate memory

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: AIOGNRC: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (c0002) (0 x 2013).

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: OBJLIB-FILEBE: FileBEOpen: unable to open ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (786435).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot open (cannot allocate memory): ObjLib_Open failed. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LINK: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-STRING: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LIB: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' with flags 0xa cannot allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DRIVE: cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': failed to allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': open with success (10) size = 53687091200, hd = 3565896. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: 'JD-5-Manager - flat hard' (0xa)

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: Msg_Post: error

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.literal] cannot allocate memory

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LINK: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (0xa): vmfs, 104857600 sectors / 50 GB.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' or one of the snapshot disks it depends on.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: ----------------------------------------

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LIB: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (flags 0xa, type vmfs).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISK: disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' a UUID 60 00 c2 9 c cf e7 7A d0 - c9 a4 f2 29 3f 42 e7 e9'

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DRIVE: OPEN "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" Geo (6527/255/63) BIOS Geo (0/0/0)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISC: discs of opening had 16 ms.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Module DiskEarly market failed.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: scsi0:0: numIOs = 0 numMergedIOs = 0 numSplitIOs = 0 (0.0%)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Closing of disc scsi0:0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': closed.

  2013 07-09 T 00: 41:32.937Z | VMX | I120: WORKER: asyncOps = 3 maxActiveOps = 2 maxPending = 0 maxCompleted = 2

  And the vmdk disk file:

  # Disk DescriptorFile

  version = 1

  Encoding = 'UTF-8 '.

  CID = 4ed52c7e

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "vmfs".

  # Description of the measure

  RW 629145600 VMFS "JD-5-manager_1 - flat hard."

  # The database disk

  #DDB

  DDB. Deletable = 'true '.

  ddb.virtualHWVersion = '8 '.

  ddb.longContentID = "8264138edeb9f6fb2afaf3be4ed52c7e".

  DDB. UUID = "60 00 C2 98 c9 03 10 f9 - 19 1A 34 a1 ba e3 1 c c3"

  DDB. Geometry.Cylinders = "39162.

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "63".

  ddb.thinProvisioned = '1 '.

  ddb.adapterType = "free".

  As you can see that the parentCID is the correct setting for a vmdk with no snapshots.

  Tips to solve this problem?

  Thank you kindly.

  After asking, I checked the vmkwarning log and found the following:

  / var/log # tail vmkwarning.log

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  Which leads me to the following VMware KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004424

  Using PowerCLI, I checked the total size of all the VMDK files on a member of the cluster with the following command:

  PowerCLI > Get-hard drive - Datastore |-ExpandProperty CapacityGB select | measure - sum - ave - max - min

  County: 78

  Average: 197.730180789263

  Sum: 15422.9541015625

  Maximum: 544.49609375

  Minimum: 50

  Property:

  According to this article, the maximum size supported all open VMDK files was only 8 TB, so I was much higher than that, so fall on issues.

  I adjusted the VMFS3. MaxHeapSizeMB at the maxmum 256 MB to compensate and that solved this problem.

• db_load error: cannot allocate memory

  Hello

  When I try to import a dump file, I always get this error:

  
  

  db_load: BDB2055 lock table is out of available lock entries

  db_load: cannot allocate memory

  I performed "db_load f outdb/outdb2 - h env xass.db".

  
  

  and I put max locks:

  dbenv-> set_lk_max_locks (dbenv, 1000);

  but it does not work.

  
  

  What should I do to avoid this problem?

  Thank you for your help in advance

  
  

  
  

  Mark

  
  

  
  

  Update:

  
  

  I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.

  The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?

  because I can not increase the infinite number of locks!

  If this is not the case, How can I cause "db_load" release of transaction locks?

  Is someone can help me?

  Mark

  Hi Mark,

  If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.

  The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.

  Kind regards

  Winter, Oracle Berkeley DB.

• This error: "java.io.IOException: error = 12, cannot allocate memory.

  I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:

  var myCommand = new Command ("ls");
  myCommand.execute (true);
  System.log (myCommand.Result);

  We use VAPP VCO and we continue this error:

  "Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"

  Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.

  Have you tried to increase the memory of the virtual machine?

  I assume that you already have tried to restart the virtual machine without increasing the memory, just?

  Christophe.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• Help.  Error "cannot allocate memory".

  Hey all,.

  I tried a search first, and I tried google.  I have to look at a PC that has CS5 or CS5.5 tomorrow, it runs Windows 7 64 bit with 16 GB of Ram.

  The error given is:

  "Cannot allocate 0.000 MB of memory. Or decrease memory for rendering of the framework requirements

  or install more RAM. (Object 123803/U.Mem) »

  And I have no idea.

  I suspect, it might be in the way that there AE set up, but wont know until I see the machine.  Any suggestion is appreciated.

  See you soon

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• "Cannot allocate memory" popup on Quit

  First visit here, and hoping someone can help...

  Creative cloud according to update my installation of After Effects to v12.1.0.168 today, I now have a frustrating dialog box that opens whenever I left... any ideas? This was not the case before AE has been updated and it happens even if I have no other applications running. My system is a fairly standard mid-2011 iMac - i7 to 3.4 GHz, 16 GB RAM with AMD Radeon HD6970 2 GB - and I am still currently under OS X 10.8.5.

  Another novelty is that if I double-click a project file in the Finder to launch After Effects, the project is open, only the application.

  I tried to restart, repair permissions and also downloaded the update 12.1 and re-installed just in case there was a problem with the CC download, but all without success

  

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• 14 elements: catalog cannot be saved - Fehler beim Schreiben der Datei (en)

  After the upgrade items 11 to 14: saving a catalog translates into error message when writing file ""... \catalog.pse14db "."

  Any ideas?

  Bin unter Win7 von elements 11 auf 14 umgestiegen - 2 catalogs konvertiert.

  Beider catalogs Serenade Friday Fehlermeldung Sichern "Fehler beim Schreiben der Datei (en)... \catalog.pse14db.

  There're eine Lösung?

  Dennoch of Auf Umwegen klappt: erst auf Internet III/2. Partition gesichert. Dann copy by external to explore auf III.

  Ware Schön, wenn Adobe elements 14 auch bad so weit kommt ;-).

• Fehler bei Videovorschau - Fehler beim create movies. (Error in the video Preview - 'film compilation error. Unknown error.)

  Hallo,

  ICH habe seit Kurzem problem beim Exportieren aus Premiere Pro 2015.2.

  ES opens sich ein Fenster mit found message:

  "Fehler bei Videovorschau - Fehler beim create movies. Unbekannter Fehler . »
  
  As sharps Fehlers habe ich meinen Rechner neu aufgesetzt, aber er is experienced.

  Ich weiss, wie also provozieren kann ich jetzt Aber. Wenn ich beim export die Zielbitrate [Mbps:]

  Auf unter 10 stelle tritt der Fehler auf.

  =======================================================

  Hello

  I recently problems when exporting from Premiere Pro 2015.2.

  It opens a window with the following message:

  "Error in the video Preview - 'film compilation error." Unknown error. ».

  Because of this error, I restarted my computer, but he persists.

  I know now how I can cause the error. When I export the movie and put the target bit rate [Mbit / s:]

  less than 10, the error occurs.
  
  ==========================================================
  
  Windows Pro 10
  First Pro CC 2015.2
  Intel Core i7 - 4930 K CPU 3, 40GHz
  32 GB of RAM (checked with MemTest, no error)
  NVIDIA GeForce GTX 780 (game ready Driver, Version 368.39)

  With the 2015.3 version, the problems seem to have disappeared.

• VCENTER Fehler beim Konfigurieren of HA-agent

  Hallo Forum,

  beschaftige mich mit VMWARE noch nicht lange, die umgesetzten Projekt function aber gut war. Nun bin ICH an einem Punkt angelangt, wo ich nicht mehr weiter weiss.

  Kofiguration:

  2 Dell Poweredge 610, ESXI4.1

  1 SAN Equallogic PS4000XV

  VMWARE Essentials more

  Hardwaretechnische redundancy

  1 as VMNetwork nic, 2 ISCSI, 2 as LAN

  Vorgabe the Kunden: Ausfallsicherheit, also HA

  Auf den hosts laufen Gein. 12 VM, bisher ohne problem

  Nun habe ich den Vcenter auf einer virtuellen Maschine unter Win2008R2 installed, ein und einen Cluster standing Datacenter. Habe die Host´s in den Cluster eingebunden, keine problem.

  Aber ich HA aktiviere ich following Fehlermeldung out so:

  Fehler beim Konfigurieren of HA-agent auf

  Dem host. IM Fehlkonfiguration

  Hostnetzwerk - the installation program.

  Die Host´s bekommen ein rotes Ausrufezeichen.

  Neustart, HA aus - und wieder briefly, etc. bringen leider keinen Erfolg. Habe auch in der keine brauchbare heraus read können information documentation.

  Hope, dass ihr einen Tipp as habt mich nun.

  Danke im Voraus.

  Hello

  JA, der kann und should OS laufen vCenter. Config looks the first correct aus Blick auf die. Kann ein the other und den auf der vCenter ESXi Console im management network can reach (ping IP und Namen auf)? Der vCenter Hat nur ein 'Beinchen' im gleichen Netzsegment wie die ESXi Hosts?

  Beste Grüße

  Christian

• ICH besitze die Kaufversion von LR6 as Mac. Habe just uber das App 'Creative cloud', das die diversity program von Adobe verwaltet mir die latest Version LR6.3 downloaded. LR startet, aber dann gibt 'ist Ein Fehler beim Versu Fehlermeldung die

  ICH besitze die Kaufversion von LR6 as Mac. Habe just uber das App 'Creative cloud', das die diversity program von Adobe verwaltet mir die latest Version LR6.3 downloaded. LR startet, gibt dann aber die Fehlermeldung 'ist Ein Fehler beim Versuch aufgetreten, zwischen den Modulen zu winds' aus. There are da ein problem zwischen Kaufversion und CC version?

  After uninstall, 6.0 installation and then manual (not through application Manager) 6.3 update its working again

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Calc Dynamics Processor cannot allocate more than 350 the heap block of

  Dear users of Essbase,

  I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

  My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

  But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

  IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

  IF (@ISUDA ("SCENARIO", "XXX"))

  do something...

  ENDIF

  ENDIF

  I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

  I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

  I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

  As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

  If you have encountered this problem would like to take suggestions. Thank you.

  Kind regards

  Praveen

  Of course, JM, it was my test script.

  I would like to change my script to be the best :-).

  And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

  The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

  It is easy to build the new app with fresh demands to try to include new features to the existing system.

  Thanks a ton for your time and your suggestions.

• Cannot allocate 0.000 MB of memory.

  I keep getting this message while he was working on a project in AE.

  "Cannot allocate 0.000 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)"

  I deleted the cache in AE and premiere. I left first and the TEA so that EI is the only thing running. I even reset the pram Mac, but we are still receiving this error.

  I am running Adobe after effects CC 2015.3 (13.8).

  OS X Version of Yosemite 10.10.5

  iMac 27 inches, end of 2013)

  Treat 3.5 GHz Intel Core i7

  16 GB 1600 MHZ DDR3 memory

  Macintosh HD boot drive

  Graphics NVIDIA GeFroce GTX M 780, 4096 MB

  Please let me know if you need more details, and I'll be happy to provide.

  Thank you for your time and help in advance. Any suggestions are welcome.

  Looking forward to you soon.

  George

  Hello

  You may have a few third-party plugins that requires an update. Please check below the places and remove them to confirm.

  1 MAC HD or startup drive > library > Application Support > Adobe > commune > Plugins > 7.0 > MediaCore.

  2 applications > After Effects > Plugins.

  Second, there are 5 default folders. So, remove everything it to check the cause.

  

  Vinay