Help.  Error "cannot allocate memory".

Similar Questions

• db_load error: cannot allocate memory

  Hello

  When I try to import a dump file, I always get this error:

  
  

  db_load: BDB2055 lock table is out of available lock entries

  db_load: cannot allocate memory

  I performed "db_load f outdb/outdb2 - h env xass.db".

  
  

  and I put max locks:

  dbenv-> set_lk_max_locks (dbenv, 1000);

  but it does not work.

  
  

  What should I do to avoid this problem?

  Thank you for your help in advance

  
  

  
  

  Mark

  
  

  
  

  Update:

  
  

  I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.

  The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?

  because I can not increase the infinite number of locks!

  If this is not the case, How can I cause "db_load" release of transaction locks?

  Is someone can help me?

  Mark

  Hi Mark,

  If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.

  The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.

  Kind regards

  Winter, Oracle Berkeley DB.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• Fehler beim co-chair der speaker: 12 (cannot allocate memory)

  Hello

  We have a big problem with one of our virtual machines.

  We use Symantec BackupExec 2014 and this seems to cause huge problems with the VMDK files.

  The thing is, this special VM has thausands of disk files vmdk divided into blocks of 4MB.

  Makes this virtual machine is so slow, that we were unable to work with her.

  So, what you do everything first? right... try to turn...

  But this time: ERROR. Nothing happens. The machine does not start.

  I would try to take a look at the vm-folder on the volume of SAN. But even here, nothing happens. just of hundreds of «...» »

  So I tried to download the whole file. Here, I recognized on the thausands of vmdk files. After that, I cancelled the copy and began to consolidate the disk files.

  After 4 and a half hours (every 10 minutes he took a step forward 1%), the system has halted the process with 12 error (cannot allocate memory)

  I tried to find a solution on the web. But nothing about this kind of problem again.

  does anyone have a tip? Or better, a solution that would be the next us?

  Thanks in advance

  Hackert

  Der Versuch die Maschine zu clones ist eine gute idea zweifelsfrei. Klappt ist alles ok Wenn wenn nicht - durch die grosse Anzahl der Snapshots - muss die Kommandzeile und ein wenig Handarbeit hold. Es gibt Kommandozeilen VMware-Tools die yesterday used werden können. DAS sind vmkfstools (as ESXi und/oder vmware-vdiskmanager as VMware Workstation.) The VMware KB article http://kb.vmware.com/kb/1004545 shows wie das in meherern Entert gemacht werden kann, wenn die Anzahl der zu gross wird und nicht mehr works etc. clones Snapshots. Important ist dabei eine der Daten zu haben current safety, falls was dabei schiefgeht.

  André

• This error: "java.io.IOException: error = 12, cannot allocate memory.

  I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:

  var myCommand = new Command ("ls");
  myCommand.execute (true);
  System.log (myCommand.Result);

  We use VAPP VCO and we continue this error:

  "Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"

  Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.

  Have you tried to increase the memory of the virtual machine?

  I assume that you already have tried to restart the virtual machine without increasing the memory, just?

  Christophe.

• Cannot power on VM - cannot allocate memory

  I started to see this random question on VM on our companys (3 guests) ESX cluster. I had to stop working on this cluster until we can solve the problem

  I encountered a similar problem before that related to snapshots, but this problem occurs on machines that have ever been instant and in the past, had been working perfectly.

  An excerpt from the log file of the VMware virtual machine:

  2013 07-09 T 00: 41:32.918Z | Worker #0 | I120: DRIVE: OPEN scsi0:0 [' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.918Z | Worker #1 | [I120: DRIVE: OPEN scsi0:1 ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' persistent R]

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: FileIOErrno2Result: unexpected errno = 12, cannot allocate memory

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: AIOGNRC: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (c0002) (0 x 2013).

  2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: OBJLIB-FILEBE: FileBEOpen: unable to open ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (786435).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot open (cannot allocate memory): ObjLib_Open failed. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LINK: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-STRING: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LIB: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' with flags 0xa cannot allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DRIVE: cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': failed to allocate memory (786441).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': open with success (10) size = 53687091200, hd = 3565896. Type 3

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: 'JD-5-Manager - flat hard' (0xa)

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: Msg_Post: error

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.literal] cannot allocate memory

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LINK: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (0xa): vmfs, 104857600 sectors / 50 GB.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' or one of the snapshot disks it depends on.

  2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: ----------------------------------------

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LIB: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (flags 0xa, type vmfs).

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISK: disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' a UUID 60 00 c2 9 c cf e7 7A d0 - c9 a4 f2 29 3f 42 e7 e9'

  2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DRIVE: OPEN "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" Geo (6527/255/63) BIOS Geo (0/0/0)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISC: discs of opening had 16 ms.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Module DiskEarly market failed.

  2013 07-09 T 00: 41:32.933Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: scsi0:0: numIOs = 0 numMergedIOs = 0 numSplitIOs = 0 (0.0%)

  2013 07-09 T 00: 41:32.933Z | VMX | I120: Closing of disc scsi0:0

  2013 07-09 T 00: 41:32.933Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': closed.

  2013 07-09 T 00: 41:32.937Z | VMX | I120: WORKER: asyncOps = 3 maxActiveOps = 2 maxPending = 0 maxCompleted = 2

  And the vmdk disk file:

  # Disk DescriptorFile

  version = 1

  Encoding = 'UTF-8 '.

  CID = 4ed52c7e

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "vmfs".

  # Description of the measure

  RW 629145600 VMFS "JD-5-manager_1 - flat hard."

  # The database disk

  #DDB

  DDB. Deletable = 'true '.

  ddb.virtualHWVersion = '8 '.

  ddb.longContentID = "8264138edeb9f6fb2afaf3be4ed52c7e".

  DDB. UUID = "60 00 C2 98 c9 03 10 f9 - 19 1A 34 a1 ba e3 1 c c3"

  DDB. Geometry.Cylinders = "39162.

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "63".

  ddb.thinProvisioned = '1 '.

  ddb.adapterType = "free".

  As you can see that the parentCID is the correct setting for a vmdk with no snapshots.

  Tips to solve this problem?

  Thank you kindly.

  After asking, I checked the vmkwarning log and found the following:

  / var/log # tail vmkwarning.log

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

  (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

  (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

  Which leads me to the following VMware KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004424

  Using PowerCLI, I checked the total size of all the VMDK files on a member of the cluster with the following command:

  PowerCLI > Get-hard drive - Datastore |-ExpandProperty CapacityGB select | measure - sum - ave - max - min

  County: 78

  Average: 197.730180789263

  Sum: 15422.9541015625

  Maximum: 544.49609375

  Minimum: 50

  Property:

  According to this article, the maximum size supported all open VMDK files was only 8 TB, so I was much higher than that, so fall on issues.

  I adjusted the VMFS3. MaxHeapSizeMB at the maxmum 256 MB to compensate and that solved this problem.

• Integrated R Script error: cannot allocate vector of size 838,6 MB

  Hello

  I am using the linear model in Scripts embedded in R. In the linear model, there will be a column that depends on 7 selected variables. The table around a 115335 record. I get an error when I fire the select below saying query ' error RQuery: cannot allocate vector size Mo 838,6 '.

  Is there a limit on the number of records to move for prediction?

  My script looks like in below:

  Start

  sys.rqScriptDrop ('OOS_LD_Prediction');

  sys.rqScriptCreate ('OOS_LD_Prediction',

  "{function (dat, datastore_name)}

  MOD <-lm (OOS_LOST_DOLLARS ~ DAY_OF_WEEK + STORE + PEP_BRAND + ITM_VELOCITY_CLUSTER + STR_VELOCITY_CLUSTER + OOS_REASON + DAYS_OF_SUPPLY, dat)

  PRD <-predict (mod, dat = newdata)

  PRD [As.Integer (rownames (PRD))] <-prd

  RES <-cbind (dat, PRED = prd)

  }');

  end;

  /

  Select *.

  table (rqTableEval)

  cursor (select day_of_week, store, pep_brand, itm_velocity_cluster, str_velocity_cluster, oos_reason, days_of_supply, oos_lost_dollars

  of oos_aggr_fact).

  cursor (1 select as "ore.connect", "LP" as "datastore_name" of the double).

  ' select day_of_week, store, pep_brand, itm_velocity_cluster, str_velocity_cluster, oos_reason, days_of_supply, oos_lost_dollars, 1 PRED

  to oos_aggr_fact ',

  'OOS_LD_Prediction'));

  The error is generated:

  ORA - 20000:RQuery error

  Error: cannot allocate vector of size 838,6 MB

  ORA-06512: at "RQSYS. RQTABLEEVALIMPL', line 112

  ORA-06512: at "RQSYS. RQTABLEEVALIMPL', line 109

  20000.00000 - '%s '.

  Can someone help me with this please?

  Namrata,

  The key to the problem is STORE with 1408 distinct values. For STORING data, it is often that you want to predict a value for a particular STORE (in which case build you models of 1408), or group stores in regions (e.g., by State, County or country) and to build models on data associated with each region.

  To build 1 model by store, you can do this by using ore.groupApply.

  You can also build a map of the STORE of the REGION and use ore.groupApply by REGION.

  When you score, you select the template for the store in particular or the region.

  Mark

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• "Cannot allocate memory" popup on Quit

  First visit here, and hoping someone can help...

  Creative cloud according to update my installation of After Effects to v12.1.0.168 today, I now have a frustrating dialog box that opens whenever I left... any ideas? This was not the case before AE has been updated and it happens even if I have no other applications running. My system is a fairly standard mid-2011 iMac - i7 to 3.4 GHz, 16 GB RAM with AMD Radeon HD6970 2 GB - and I am still currently under OS X 10.8.5.

  Another novelty is that if I double-click a project file in the Finder to launch After Effects, the project is open, only the application.

  I tried to restart, repair permissions and also downloaded the update 12.1 and re-installed just in case there was a problem with the CC download, but all without success

  

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• Cannot allocate 0.000 MB of memory.

  I keep getting this message while he was working on a project in AE.

  "Cannot allocate 0.000 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)"

  I deleted the cache in AE and premiere. I left first and the TEA so that EI is the only thing running. I even reset the pram Mac, but we are still receiving this error.

  I am running Adobe after effects CC 2015.3 (13.8).

  OS X Version of Yosemite 10.10.5

  iMac 27 inches, end of 2013)

  Treat 3.5 GHz Intel Core i7

  16 GB 1600 MHZ DDR3 memory

  Macintosh HD boot drive

  Graphics NVIDIA GeFroce GTX M 780, 4096 MB

  Please let me know if you need more details, and I'll be happy to provide.

  Thank you for your time and help in advance. Any suggestions are welcome.

  Looking forward to you soon.

  George

  Hello

  You may have a few third-party plugins that requires an update. Please check below the places and remove them to confirm.

  1 MAC HD or startup drive > library > Application Support > Adobe > commune > Plugins > 7.0 > MediaCore.

  2 applications > After Effects > Plugins.

  Second, there are 5 default folders. So, remove everything it to check the cause.

  

  Vinay

• error 1097 after the call dll function that allocates memory inside

  Hello!

  When a one call my duties in my dll of LabView, I get an error 1097. My function takes a few arguments, and then allocates memory for the measure.

  He doesn't have pointers to this memory area, it's just allocates this memory for himself. I don't know what could be the problem, no doubt, I'm missing something.

  Could you please help?

  Best regards

  Tamas

  
  

• Cannot allocate 0.002 MB memory... I have 32 GB of RAM

  Hi all

  I've upgraded to the new version of After Effects 11/30 and I always get this message:

  Cannot allocate 0.002 MB memory reduce memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)

  When I purge the cache of the memory and the disk is not much except change the error to a (0: 39) or (7: 5)

  I went to the quarter to frame (10 x 15) custom resolution...

  I have 32 GB of RAM and After Effects use 20-29 gb as seen on my application for management tasks on El Capitan.

  It was produced after about 30 minutes of use with no problems. So if I saw my composition I get all these error messages continue to appear after I press ok making it difficult to work on my project. Finally, I restart my computer that solves the problem for 15-20 minutes until I need to redo a reboot.

  For now, the only solution I've come across uses an older version of AE. It bothers me that this happens to the newest version that I prefer to work with an adverse event to date...

  Best,

  Danny

  What is the exact version of 2015 for CC number that you use? There is a big difference in performance between 13.5.0 and 13.7.2!

  How you establish previews? You have the cache before reading to checked in your preview? What are the parameters of your memory?

  What version do you use that works correctly? (Full version number to please.)

• ERROR: Out of MEMORY, help, please

  Edition of Windows: Windows 7 Home Premium

  Processor: Intel Core i7 860

  RAM: 8 GB

  System type: 64-bit operating system

  Motherboard: Asus P7P55D motherboard

  Graphics card: GeForce GTX 295

  Manufacturer: myself

  Error: Out of memory error when I enter on my second game in Combat Arms (fps) by Nexon. He stops the game each time around going into the second game and gives me this error.

  I've had this computer for about 3 months now, and this error began to occur when Nexon has voice chat and a few new features of game which took place in a patch about 1 month ago.

  How to fix this error?

  I would be very grateful if you could help me.

  Mr. Gill,
  I would say that you uninstall\re-insatll the game but do not install the patch.  Then, play the game and try for awhile and see if the error occurs.  It is possible that the patch is not fully compatible with Windows 7, or a piece of your equipment.  You can also check manufacturers of games forums for more information on this situation. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner