Fetch SIM Subscriber ID and device manufacturer

Similar Questions

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Driver DVD disappear from 'My computer' and 'Device Manager '.

  Vista HP Portable DVD player continues to disappear from 'My computer' and 'Device Manager '. Already tried Upper/LowerFilters.

  Hi, a few weeks ago, the DVD burner in the laptop suddenly disappearedmy computer (Windows Explorer).  The first thing I did was check theDevice Manager to see if the drive was there.  It was not the case.  Restarting the laptop did nothing.  Repeated several times, active Vista updates.  No change.  By checking the net, I tried to delete the Upper/LowerFilters in the registry, download it tool Microsoft fix , delete iTunes, do a system restore, to change all the parameters of thesleep and hibernation off and a few other things.  It appeared for the first time after that:

  1. Do a restore of the system for the first restore point.
  2. Remove the DVD writer.
  3. Restarting the laptop.
  4. Research of new hardware in Device Manager .
  5. Change all parameters of standby and Hibernate off. (I tried this method without this step first, but the drive disappeared after the computer went to sleep and woke up.)  Tried 3 times with the same results).
  6. Closing.
  7. Reinsert the DVD burner.

  On the next reboot, the DVD writer has been recognized and ended up in my computer and Device Manager .  No errors of any kind and no drivers were installed at startup.

  What has happened since then, in the last 4 or 5 days, is randomly disappears from thedesktop .  Usually after a few hours or more.  This time, however, it usually appears inDevice Manager after a search of new material.  No reboot required.  It will read from a DVD .avi files each time.  It has not been detected byDevice Manager maybe about 2 or 3 times, and after a simple reboot, it will be present inmy computer and Device Manager automatically after a reboot.  I read that the superior/UpperFilter mark has worked for many people, but for some, the problem returns.  In addition, many of the discussions on this question and proofreading are years.  It happened about 10 days ago.  Within 2 days before the problem appeared first, it was an update of windows, but also an update of iTunes.

  I noticed that I received this error when opening iTunes:

  "The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes. ''

  I have not reinstalled, no DVD player.  Uninstalled itunes again.  Since I finally got the drive to appear (using the method I described above), I did bother to reinstall iTunes because I particularly need it on this computer, worried that it may be the cause of the original problem and I wanted to see if the disc disappears again.  I did do it, however, let QuickTime installed.  Don't know if this could be a problem?

  I stumbled upon this suggestion, but I also had the same question as the next post, and I have not seen a response.  I don't know if or how I should try:

  Nikki,

  You can not go back if the restore points aren't there. Try to reinstall the IDE driver.

  To do:
  -Click on the round to start and right click on computer
  -Left click on properties, this will open the system window
  -Click on device high Managerin left
  -Click on continue if prompted by UAC
  -Goto the 'IDE ATA/ATAPI controllers' you should right click on uninstall and restart

  BTW that dog rox in this avitar

  See you soon! MCP. MCDST. LVL 80

  Hi, thanks for the comment on my puppy. She is now 5 MB and her name is Nikki, lol.

  Well, I tried what you said, but the IDE ATA/ATAP controllers has a (+), so when I select it does give me not an option to uninstall. It is for me (analysis of the physical changes (or) properties).       and if I click on the (+) sign I have 4 different options. 2 channels IDE, Intel (R) 82801 HEM / HBM SATA AHCI controller and Intel(r) ICH8M Ultra ATA Storage controllers - 2850.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e3701d75-9dbe-4ae9-9d70-83f14129247c?Prof=required

  What I see in "Device Manager", under IDE ATA/ATAP controllers is:

  IDE channel (x 4)

  Ricoh Memory Stick Controller

  Ricoh SD/MMC Host Controller

  Ricoh xD-Picture Card Controller

  Controller of PCI standard IDE dual channel (x 2)

  The laptop is about 2 years and never had problems.  The DVD burner is hardly used to burn, maybe a total of 5 disks in this time.  It has been used occasionally to read or copy from, but not much.  I'm not convinced that he is dead, as I had 2 die on me in desktop computers, after burning hundreds of CDs in them and read much.

  in any case, I was not able to find any bugs or suggestions (with the exception of 'replace' the reader), so I just wanted to describe my specific situation and see if anyone could help out.  Forgive me for information, I have left out, but I am an amateur when it comes to the problems with the computer and still don't know what mean things or where I can get information on my OS, software or hardware.  All anyone can do would be greatly appreciated.

  This is the information I have:

  HP Pavilion dv6700 Notebook PC

  Optiarc DVD RW AD-7560 ATA Device

  Vista Home Premium

  Service Pack 2

  Thanks again for any help.

  Hello
   
  1. do you have the software installed on the computer of CD/DVD burning?
   
  Check if the CD/DVD drive is recognized in the BIOS (Basic Input/Output System).
  Check ' BIOS: frequently asked questions ": http://windows.microsoft.com/en-US/windows-vista/BIOS-frequently-asked-questions
  Step 1: We also recommend to uninstall the CD/DVD burning software, if you have everything installed, restart the computer and check the result.
  Scan for the device in Device Manager. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. click on one of the items in the list, click the Action menu and click Scan for hardware changes.
  3. check if the CD/DVD is displayed.
  
  For more assistance on this, contact the manufacturer of the laptop.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• There is a yellow triangle on top of my computer in the printers and devices window icon, does that mean?

  There is a yellow triangle on top of my computer icon in the printers and devices window, it says "Base system device driver in not installed".  I tried all the fixes and nothing has worked.  What is - this and I can remove it.  Has it something to do with my iphone and Hello which I get an error as well and can never settle.

  Hi Linette6491,

  yellow triangle indicates that you do have not all related drivers or program installed for you're printer, so log on to downlaod and the printer manufacturer's website and install the latest drivers

  You can also try the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Good luck

• My browser is malfunctioning and device drivers are not installed code 28 for Simple PCi communications controller.

  Original title: my browser does not correctly code 28

  Hello

  my browser is malfunctioning Device drivers are not installed code 28.

  Details that are in Device Manager

  PCi Simple communications controller

  Another property

  Harware IDS

  Value

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086 & REV_02

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086

  PCI\VEN_8086 & DEV_29C4 & CC_078000

  PCI\VEN_8086 & DEV_29C4 & CC_0780

  Thank you, Kat

  Hi Kat,

  1. what web browser do you use?

  2. are you unable to go online?

  3. have you made a recent software or hardware changes to the system?

  This error indicates that the drivers for the device are not installed.

  The ID of the seller seems to be related to the drivers of Intel.

  You may be prompted to provide the path of the driver. Windows may have the driver built-in. If you are prompted for the driver and you don't have it, you can try to download the latest version of the driver from the computer or the device manufacturer's Web site.

  You can also try to download the latest version of the computer manufacturer's website Chipset drivers and check if it helps.

  Updated a hardware driver that is not working properly

  For more information, see the article:

  What to do when a device is not installed correctly

  Hope the helps of information.

• icons missing for printers and devices on windows 8

  Please I need help.

  I made this statement on this link

  http://www.SevenForums.com/tutorials/224162-devices-printers-change-device-icons-custom-icons.html

  all my printers icons now has the same icon and the same information

  Manufacturer: hp

  model: hp LaserJet color

  Description: cm2320

  Category: MFP

  Here is the list of the printer in printers and devices:

  DYMO label (USB connection)

  Da:

  HP color laserjet cm2320 (network)

  HP eprint

  Microsoft xps

  Nitro pdf

  Send to one note

  Please see step 7 for the hardware ID, my printer hardware ID: "PRINTENUM\localprintqueue", but all my printer has the same hardware ID: "PRINTENUM\localprintqueue".

  the statement has been applied to my hp color laserjet cm2320

  Please help me!

  You should not use tweaks windows 7 to Windows 8. They do not apply. You can remove the printer in devices and printers, and then choose Add a printer to install it again. It will use the drivers that you have already installed.

• Portege 7020 error message: PXE - E01 PCI vendor and device ID do not match

  Hi all

  I get this error message (ID PXE - E01 PCI vendor and device do not match) when starting, when I use my portege 7020CT on a cd-docking station. The error message occurs only when I boot with the power adapter.
  I know what means the error message, and I tried to change the boot priority and the BIOS update. None of that helped him. I can't say when the error occurred since I used a LAN card wireless for a long time.
  The ethernet LAN for now, so im card dosnt work using an ethernet pccard.

  Toshiba has released a "patch" for this problem but only with the station of transhipment on the DVD, I also tried, but it didn't work either.

  What seems strange is why the problem only occurs when the power supply is turned on?
  When the message appears, the screen is locked and I can not pass.

  hope someone can help me.
  / Dreadeye

  Hello

  Well, you're right. This message is displayed if it of not possible to boot from LAN.
  In this case, it s advisable to change the boot priority.
  But it seems that you have already tried to change this option. It s very strange questions because it s occurs only if the power supply is turned on.
  I n t really have no idea, but I found this site:

  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  Try installing the latest Boot Agent. I put t know if it helps but you can try it.

  Good luck

  Good bye

• Lack of cRIO 9154 in the add targets and devices dialog box

  Hello again all you lovers forum useful!

  I have an existing LabVIEW project which includes a Hypervisor PXI real-time target.  One of the devices that target is a chassis cRIO 9114.  I now need to add a cRIO chassis additional 9154 so according to a conditional disable signal, I can modify my code to talk to the old chassis or the new chassis, which keeps my modular code across different hardware.

  However, I write my code update on my regular computer which is not hooked to the target, so when I right click on the target of the hypervisor in my project and select new-> "targets and devices...". ", I can not select the" existing target or device "to be detected automatically.  Instead, I click on the 'new target or device' to add just anyway, and I expand the CompactRIO there, and... no 9154.  I have a bunch of other cRIO features (see screenshot), including the 9114, but no 9154.

  I guessed that maybe my LabVIEW installation (2012 SP1) know not this chassis when it was released last year, so I tried to install the latest drivers from device with discs on developer LabVIEW 2013 that I just got, but he hung up during installation (the first time at 0% the second time at 27%, listed as "Validating install" for long, long before I was abandoned and cancelled).  I restarted my computer, but no change to this problem.

  Does anyone have any ideas as to why I can't choose a newer chassis to insert in my project without that it is actually attached to my computer?  And I was too quick to renounce installation of the driver, not that I don't know if that would have solved the problem anyway?  : PEI

  Thanks for your help, as always,.

  -Joe

  

  Hello Joe,

  The 9154 NOR is a RIO MXI-Express chassis that's why it should appear under the section of chassis MXIe-RIO.

  

  For installation if you are concerned that it has not installed correctly, you can try run a repair on the NOR-RIO software and look at MAX to see if you have RIO 12.1 or 13.0.

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• I am running XP and I can't use my keyboard and Device Manager is empty.

  I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please

  Hi margaretbrown,

  · What is the number and the model of the computer?

  · Also provide the model number brand of na on the keyboard?

  · What is the service pack installed?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504

  And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Recent problem that the Autoplay menu does not appear when I plug my digital cameras and devices on Windows Vista

  Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.

  The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.

  I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options.  CD and USB sticks work very well.

  I have Windows Vista.  I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista.  I tried to turn it around by using their dose, but it doesn't seem to help.

  Any ideas anyone?

  Hi - my problem is now solved.

  Not long after reading the post above the laptop crashed and had to have a replacement hard drive.

  I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.

  Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.

  Thanks a lot for your help.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• connected printer is listed on the printers and devices, however, can not establish connection

  The public printer is connected, shows in printers and devices, but is not downloading it so I can print from my Windows 7

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer