File copy failed.

Similar Questions

• Large file copy fails by sensor 4240

  Customer tries to copy a large file from a server in a local virtual IPS protected to a host in one vlan unprotected network IPS and the copy fails if file is greater than any 2Gbytes in size. If the server is moved to the vlan unprotected succeeds to the copy. There is no event on the IPS suggesting blocking actions or others.

  There could be some normalizer engine events that can drop/alter traffic without firing an alert. Some of them seem to be on by default. You try to activate "alert" on the signatures of normalizer with deny or change actions?

  Another way would be to put an action event to the source or the target filter (or both) and filter all deny actions. In this way, you say the sensor do not block all traffic from or to certain IP (based on how the filter is formed). I would use this filter to cover all signatures and void / signatures for the source/target in question.

• Pavilion laptop g7 Image Recovery file copy fails

  Material: G-7 HP laptop

  Operating system: Windows 8

  I bought a laptop Pavilion g7 in December 2012.  The 1 TB HARD disk provided with the laptop started to go bad on me.  After several attempts to "self-repair system" (which didn't) I bought a HD 1 TB Seagate SSHD replacement.  Given that I had no Windows 8 recovery disks, I contacted HP, paid for and sent them to me.

  So now I have a new SSHD, new W8 recovery discs and my laptop.  I replaced the HD and the recovery process according to the instructions of the paper that came with the disc.

  4 percent (in the "Copying files needed for the recovery of the phase of hard drive"), I get an error message:

  Reducer (the error message title)

  Copy the file fails

  From: D:/PRELOAD/votes.14. STORMWATER MANAGEMENT

  To: C:/RM/Image/votes.14. STORMWATER MANAGEMENT

  Press OK to retry.

  Obviously since I post this topic simply by pressing "OK to retry" did not work.  I turned off the laptop computer and restarted the process of recovery.  I had the same error at the same point above.

  I've read a few other BBs HP and see what people have done this experiment with various laptops, W7 and W8, posted the same question and had useful people respond by posting links and possible corrections.  I clicked on the links, but see not all what actually helps me 1) explain why I get this error message. and (2) what should I do to fix it.

  Appreciate any help anyone can provide, but please break it down Barney style as I am not a computer person.  Seriously, don't joke not on that - I'm weak in terms of technology.

  I can't understand what I'm doing wrong.

  Hello

  The first thing I want you to do is make sure the hard drive is working to do this, follow these steps;

  1 turn on the computer

  2. Select f2 for system diagnostics

  3. Select check disk hard, fast

  What is the result of this test?

  If this test passes means that it is likley to be the CD, I answered several questions like this one, where in fact the disks are corrupt so my Adviser is if your drive hard test passes contact HP and ask them to send a new set of replacement drives for unfortunately it seems problem common were disks do not work.

  James

• Large (100 gig +) file transfer fails in Windows 7 Home Premium 64-bit

  Hello

  I ran out of sensible troubleshooting options and am hoping that someone on the forum may be able to provide a solution or additional troubleshooting ideas.

  Scenario: I created a 178 concert file, an image of my old laptop XP file to be used for a virtual machine, on an external drive of USB3 for import to my new Windows 7 Home Premium 64 bit computer laptop (ASUS N61JQ i7, 4Gig of DDR3 RAM). Operation failed for copy of file on the Win 7 machine (current patches, drive D:, NTFS, 250 free concerts), without error messages, regardless of the method.

  Troubleshooting:

  Removes the file structure - exemplary fine for XP SP3 on a different machine, a smaller version (image of the C: drive only) copies very well to new laptop Win7 and creates the virtual machine that works.

  Eliminated the USB drive - used 2 different drives

  Eliminated from the USB - used Ports all three USB 2 and 3 ports and all failed, tried mapping to machine XP and do a drag and drop and copy and paste and even set up a ftp server on the Win 7 and tried machine download failed him via gigE and 802.11nall.

  More advice in this forum and others, I downloaded Teracopy who do not - this failed with a message indicating that "the operation failed due to a file system limitation", but wikipedia shows the limit of file of an order of magnitude larger than my 16 TB file.

  I also tried PowerShell coming to stop the copy without error message (resource monitor showed no activity on the external drive - the source of the file).

  I also have:

  • tried disabling / uninstalling antivirus
  • run the copy in safe mode
  • I tried to find answers in the newspaper of the events without success.

  All seemed to fail somewhere after 100 gig mark. Often (but not always) failures caused strange behavior, including being unable to , unable to task switch, unable to stop. Often (but not always) a power switch reboot was necessary. My suspicion is that the copy of file is using some pool of memory that is needed by other processes of basic and cause misfortune wide system.

  Interestingly, a new file by concatenating a line of 50 concerts three times for 150 gig in the same location as the destination file, a new file in target in the same place creating worked!

  After having exhausted the limits of my personal creativity I now submit this problem to the collective wisdom of the tribe. A big thank you in advance, Richard.

  Success!

  I tried another file copy utility FastCopy http://ipmsg.org/tools/fastcopy.html.en, he also failed, but with a slightly different error message:

  "The requested operation was not successful due to a file system limitation665"

  Search on Google that the message has led to this article:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/e0d55018-CF06-43ca-8e20-dd2bb8494c96

  ... his fundamental premise - de-Frag - did not help (drive was off fragmented already), but the link internally to:

  http://TechNet.Microsoft.com/en-us/library/cc781134%28WS.10%29.aspx

  which is a NTFS bible made me think on the compression of files and directories and of course the compression in this directory was put on, I never use the disk compression so I don't know how it's happened, but once set to 'off', the flow of the copy more than doubled and the copy proceeded until the end!

  Things that Microsoft might want to address:

  • I don't see anything in the literature suggesting there is a limitation to the compression of files. Fixing it, or the weakness of advertising would be a good thing
  • None of the built-in tools advised of an error or managed properly, one would think that NTFS has been mature enough so that it would no longer be a problem.

  Sort of, it's fixed now:

  Solution: COMPRESSION SET OFF

  Best regards and happy new year

  Richard

  

• Very slow file copy speeds

  Hello

  Recently, I myself have built a new PC and am currently under Windows 8 Pro about this. I had a problem with copying files between spaces of storage/drives on the PC. Whenever I start a file copy/move operation, the speed starts usually at a respectable speed (ie. 40 - 50 MB/s) and then quickly descends and hovers somewhere between 50 Kbps - 800 KB/s, sometimes up to 0 KB/s for a few minutes. Try to copy a large file (ie. 10 GB) takes a few hours/days where on all my other machines it would normally take a few minutes. I tried to use Teracopy to see if it could work around the problem, but it seems to have the same problem. If I transfer a file from my laptop to the computer over the network (leave the laptop to control transfers) he will sit at a constant 5-8 MB/s well. Even less than ideal but much faster than what he does internally. I have also updated the bios on my M/B to the latest version just to rule out it as a problem does not.
  I was wondering if someone could point me in the right direction on this problem and help me figure out what causes the congestion. If it helps the machine is an i5 3570 k, Asrock Extreme 4 M/B, 16 GB of DDR3 ram and a Gigabyte 7950 GPU. I have also several HARD drives more a 830 SSD from Samsung for the system drive.
  If anyone can help me with this problem I would be very happy!
  Thank you!
  Chris

  Sorry guys for not not getting back to this sentence. I managed to solve my problem.

  I thought I would test all HARD drives in the storage space and running a benchmark on them to see if they are any ball game. It turns out that one of them was not. Its read/write speeds were about 1% of what all other players received.
  So I think problem solved... FAKE! My storage pool was divided into several spaces more that contains media files on single spaces more personal files and photos etc on two way mirrors spaces. It turns out that you can't remove just a drive from the pool as you can in WHSv1 if there is single spaces in the pool. I ended up having to save all my data on another PC (fortunately I do anyway!), remove all the spaces of the pool and then he'd let me remove the drive from the pool. After that, I could finally rebuild all the spaces and then copy all the data back on.
  If MS wants this technology to be taken seriously, they NEED to implement a way to replace failed or upgrade to larger without records to delete all the data, or it is next to useless.
  I hope this could help someone...
  Chris

• error occurred in the quick clone (control files creation failed)

  Hi all
  
  I have 2 nodes ERP server running EBS 11.5.10 with 9.2.0.5 database and OS HP UX 11.11
  
  While running perl adcfgclone.pl dbTier
  
  I met the following error
  
  Check that adcrdbclone.sql
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00116: error reading of dbf files. Creation of control files will fail.
  
  
  a later part of the log file
  
  
  Creating the database DVP_test control file...
  
  
  SQL * more: release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  Connect to an instance is idle.
  ORACLE instance stops.
  Connect to an instance is idle.
  ORACLE instance started.
  
  Total System Global Area 598700552 bytes
  Bytes of size 737800 fixed
  419430400 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  
  Created control file.
  
  
  Database altered.
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp001.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp002.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp003.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp004.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp005.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp006.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  but when I query v$ tablespace temporary tablespace TEMP shows no temp1
  
  even on my production system temporary Tablespace is TEMP
  
  When I see the alert file
  It is said
  
  
  
  Tablespace 'TEMP' #2 found in the data dictionary,
  but not in the controlfile. Adding to controlfile.
  File #143 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00143" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #144 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00144" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #145 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00145" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #146 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00146" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #147 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00147" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #148 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00148" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #149 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00149" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #150 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00150" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #151 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00151" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #152 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00152" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #153 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00153" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  
  
  How can I get out of this confusion?

  Looks like your scene preclone directory is not correct (corrupted), and I think that it is because preclone does not run successfully.

  Either you follow the steps described in the following notes to change the existing to a new undo tablespace or run preclone and copy the files again.

  Note: 431652.1 - how to change the Undo existing Tablespace to a new Undo Tablespace
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=431652.1

  Note: 1013221.6 - RECOVERY of a file of DATA LOST IN an UNDO TABLESPACE
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=1013221.6

  Published by: hsawwan on January 11, 2009 22:17 - change the 2nd number of the Note to 1013221.1 to 1013221.6

• FTP .txt file copied correctly the cRio

  I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

  If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

  

  By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.

• Content file download failed. Reason: The RPC server is unavailable.

  Hello

  Please help, I have the following error with my WSUS. The clocks are so successful.

  According to the survey, it is said "updated the files needed: 2589 ' 'downloaded 0.0 MB of 30 years, MB 196,09.

  MT event logs show ID 364

  Content file download failed. Reason: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) Source file: /msdownload/update/v3-19990518/cabpool/windowsdesktopsearch-kb926356-v2-x86-nld_72b01991a8ebadf72d2512e19234943920ee4104.exe Destination file: c:\WSUS\WsusContent\04\72B01991A8EBADF72D2512E19234943920EE4104.exe

  I opened the firewall to allow full access to the net to the WSUS server, so it does not use a proxy.

  Please for any assistance you can offer.

  Did you run the Bits? Rob - bicycle - Mark Twain said it is good.

• Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  Dear Sir.

  Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  OS: Win XP Prof

  Bluetooth device: Widcomm connected to the desktop computer

  Thank you & best regards

  Magali U

  Hey Ma U,.

  Follow the steps in the article.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

• When I download java comes up with error 25099 decompression of files has failed Please help

  WHEN I DOWNLOAD JAVA ERROR HAPPENS 25099 FILE DECOMPRESSION FAILED PLEASE HELP

  Hello

  You get this error message when you download java or installing it?

  Read the following article that may help you.
  Error: 25099 during Java installation
  http://www.Java.com/en/download/help/error_25099.XML

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not read the word file copied as a shortcut on a disc

  Format microsoft word copied as a shocut on a disk is not able to be read. An error message appears that the network connection or the driver that the shortcut refers to is unavailable.

  Please excuse my rudeness and gaiety that, but everything that you copied is the shortcut, not the file. If you attach the drive to your PC, it will find the file because the shortcut will direct you to the source file, but if you try to play the file on another PC the source isn't there.

  If you do not know where the file is stored pass on the original PC, right click the shortcut and go to properties and it displays the path of the target, because it is a Word file, the entire file is probably in the Documents. In the same box, you should be able to target location or find to open the file. When you locate the file copy on the external drive.

• File backup failed. The error is: the parameter is incorrect. (0 x 80070057).

  I get the following error when I run "back up files" and tries to access "backup setting change" (only).

  I tried most option all found on TechNet to see disp.

  No problem running "full pc upwards."

  Log name: Application
  Source: Windows Backup
  Date: 09/11/2011 11:19:55
  Event ID: 4104
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: desktop
  Description:
  File backup failed. The error is: the parameter is incorrect. (0 x 80070057).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4104
      2
      0
      0 x 80000000000000
     
      21308
      Application
      Desktop
     
   
   
      The parameter is incorrect. (0 x 80070057)
      57000780E00400005B0600005C060000420ED1665C2BEE174B64529CB14610EA71000000
   
  

  Help, please

  Phillip

  Hello

  Make the SFC (System File Checker) scan and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• When I try to delete the mail from the Inbox I get the message that says: "the selected message could not be copied to the destination, UID copy failed."

  UID copy failed

  I have windows vista.  When I try to delete the mail from the Inbox I get the message that says: "the selected message could not be copied to the destination, UID copy failed."

  Hello

  ·          What mail client do you use?

  If you use Microsoft Outlook, please post your questions in the Forums of Microsoft Office.

  If you use Windows Live mail, please post your questions in the Windows Live Forum.

• Files copied to external devices (USB/PHONE/CD-ROM) damaged when displayed

  Computer desktop running W7 SP1 with 64-bit system.  Files copied from the desktop to external devices are damaged when displayed.  Files can be JPEGs (photos) and or (e, g. XLS) data files.   Similar files copied from a laptop under W7 Service Pack One with a 32-bit system correctly screen.  Errors occur on the USB ports and CD-ROM drives used to copy the data.  This is potentially a problem of HD or something related to the operating system?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  As you mentioned that the files that you copy from desktop to external devices are damaged when displayed.

  This issue would have occurred due to a virus on your computer.

  I need some information to move forward.

  1. That you get an message\code error when you try to access these files?

  Maybe your computer got infected with a virus.

  So I suggest you view the Microsoft Help article and try the steps to find out if your system has a virus.

  http://Windows.Microsoft.com/en-us/Windows/does-computer-have-virus#1TC=Windows-7

  If you find that your computer has a virus please refer to the link below and follow the steps on how to remove computer virus.

  http://Windows.Microsoft.com/en-us/Windows/how-remove-computer-virus#how-remove-computer-virus=Windows-7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Please let us know the status of the updates of your question. We will be happy to help you further.