File, creation of performance on 6.0 + devices.

Similar Questions

• How to install a .bar file hosted in a remote server on device BlackBerry 10 Dev Alpha

  I port an Android application for BlackBerry using Android Runtime. I can install this application successfully using Eclipse. Now, I want to only those files (MyApp.bar) in a remote server deployment and download the .bar using a file browser and install it to another device BlackBerry Dev Alpha 10. I was able to download but cannot install the .bar file. What should I do?

  In fact This is the kind of method I get. Google Chrome Extention (PlayBook App Manager) did the job perfectly.

• Metadata, Yes, but what about date of file creation?

  It's fine that the exported photos retain their metadata and all but the creation and modification of file dates are listed as the time of export. Is it possible to keep the original creation date of the file.

  Most likely, you are looking at the wrong date.

  The file creation date is the date on which the file was created.

  So you're interested in the date of image capture, which is in the metadata.

  The fact that the creation date of the original file and the image capture date are the same (or less than a second) should not be treated as something more than a coincidence.

• Cannot read file wav hearing recorded in the Android device

  Hello

  I use hearing CS6 version5.0 to edit wav files and play in an Android device to test. I have a wav file that can be played with an android device, I only use my Audiotion CS6 to open and save as another file, so this file cannot be read with the same device.

  Bad feedback:

  HDR.fmt_sz 18 hdr.bits_per_sample = 16hdr.audio_format = 1

  Aplay:aplay: ' / data/media/Spk_R_Bot.wav' is not in the pcm format

  Good feedback:

  HDR.fmt_sz 16 hdr.bits_per_sample = 16hdr.audio_format = 1

  aplay: play ' /data/media/Spk_R_Bot.wav':Signed 16-bit Little Endian

  aplay: Samplerate channels [44100] [2]

  Aplay: Plays

  It seems that the main format of wav file went from 16 hdr.fmt_sz to hdr.fmt_sz 18, how config my hearing that save the wav even as the right file and can be played with android device.

  You use Libsndfile .wav option to save the file, by chance? That gives endian options and all sorts of other possibilities for wav files. That could cause all sorts of problems!

  Use the Windows PCM option at the bottom of the list only - what is almost certainly the only one that will work correctly.

• I have two 2 physical HDD (logic 1 = 2 partitions, 1 with partion unique); on all the page files will improve performance, or is an annex of page file?

  My laptop has two 2 750 GB HDD (plus a 8 GB SSD Express Cache). The first HARD disk is partitioned into 2 letters two logical sectors (~ 275 GB & 375 GB {more system/recovery NTFS partitions 2}), assigned drive C (main system partition), and D (logical partition) and the second physical disk E (750 GB). Win7Pro64 created a pagefile managed system on the C drive, but not on readers D & E. Y has an advantage, or more importantly, a disadvantage to the creation of swap files on the D & E readers?

  I am not opposed to using all the 375GB logical partition on drive D as a swap file if this can help performance, and/or create a pagefile on the E drive the same size as on the C drive, once again, to help performance.

  Can someone help me with the best approach?

  Also, I have an Intel i7-3610QM with 16 GB of RAM and a GPU Nvidia GeForce GTX G675M with 2 GB of RAM.

  Thank you.

  Hello

  The best option is to let Windows control the pagefile.

  Here's more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/optimal-page-file-size/3c68f053-1248-48c9-bd10-72874834d595

  I hope this helps.

• New hard disc RDM - selection of the mapping of rdm file creation

  Hi all

  I am trying to automate the creation of new RDM disks for virtual machines.

  Watch us row map separately files on a data store named, here is the sequence of orders.

  1. because I can't find the PoweCLI method to create the mapping of RDM file, I use vmkfs as below:

  vmkfstools - z/vfms/devices/disks/naa. XXXX01 /vmfs/volumes/clustername/SharedDisk/hostname/disk1.vmdk

  2. now, we have the mapping of rdm file, I would like to create a new physical disk RDM.

  New-harddisk - Contorller $controller DiskType - RawPhysical - DeviceName ' / vfms, devices, disks, naa.» XXXX01"- vm $vm

  However, this creates a new mapping file. I don't see how I can use the one I created above.

  Am I missing something? The operation of fixing using the existing mapping of RDM file is insignificant in the GUI.

  No, not missing anything.

  This scenario is not possible with the cmdlet New-hard drive I'm afraid.

  You can use a script that uses the ReconfigVM method.

  Through the Device.Backing property, you can specify the location of the VMDK file

• Is it really true that I can't view file creation date and time in the form of column bin?

  I need to sort my material by the date and time of creation of the file.

  It seems that this basic metadata more are missing in Premiere Pro

  I hope someone can point to my error here - otherwise, it's a MAJOR FAILURE by Adobe. Surely, after file name, it is the most "basic" bit of METADATA required from a file.

  Otherwise there is no solution workaround, other than the batch renaming clips at the finder level. (I tried the tags and comments at the research level, but can't seem to access it either)

  Hi Jim,.

  Unfortunately, even when these data are present for the clips, the ability to sort by these data is broken.

  It caused a lot of performance issues, then Yes, that it has been disabled.

  and they still haven't fixed yet.

  This is fixed in the next version. However, you must add the columns in the display of the metadata.

  Thank you

  Kevin

• How can I write a plugin to write a file on the SD card on Android devices?

  I would like to be able to write a file and save it to the SD card by programming with a plugin or extension for Firefox on Android devices, is that possible or is there a documentation on this?

  It would be a great place to start. There is a lot of documentation on DND to help you get started.

  https://developer.Mozilla.org/en-us/docs/extensions/Firefox_on_Android

• Toggle the runtime from Visual Studio TestStand API declaration XML file creation

  I am looking for a Visual Studio c# solution to selectively disable the creation of the generation XML report file using the API TestStand.

  These XML files are useful for active troubleshooting for technicians, but end up cluttering the important directories with unnecessary information most of the time.

  I am aware that the creation of the XML file can be disabled through the element to configure menu the TestStand sequence editor | Result processing | Name output report | Enabled the option unchecked.

  This is useful, but:

  1. I have not found a way to enable - disable this feature when running.

  2. I don't think it would be an effective solution for my paradigm of basic deployment without installation.

  Any help or ideas would be appreciated!

  Here is an example that works for me. If I run single-pass with a report on, I don't get a report.

• zip file creation

  I create a text file with a specific name and multiple values from an experience. I need to place this text file in a zip file that has a specific name, also referring to the respective experience. I don't know how to do this. I read something about the creation of projects, but that seemed more manual. I need this to be automatic so that when the values are obtained, it creates the zip file then creates and updates the txt file in zip archive. Thanks in advance.

  lvuser333 wrote:

  I create a text file with a specific name and multiple values from an experience. I need to place this text file in a zip file that has a specific name, also referring to the respective experience. I don't know how to do this. I read something about the creation of projects, but that seemed more manual. I need this to be automatic so that when the values are obtained, it creates the zip file then creates and updates the txt file in zip archive. Thanks in advance.

  Try something like this

  

  It essentially uses the name of the experience to generate a full path of a text file, and a full path of a file zip (both with the common name experiment) in location based on the file path.

  Then writes the results to a text file, create / open a zip file, adds the text file newly created for the zip file and the farm.

• Help: Configure the simple test sequence, operator selects particular test connects to the part of the teststand sequence file and then performs the test

  Hello

  I am very new to TestStand, please see the question below and give advice.

  I want to set up a simple test sequence.

  I want a message to popup on the screen that asks the operator what unit of 6 units (maximum 10) to test (i.e. There is say box of 6 to 10 s to select from).

  Then the sequence goes to the specific part of the sequence and performs the test on a unit that either has been selected.

  What is the best way to do it?

  I use pop-up message windows to do this? and if so what should I connect to the correct part of the sequence file?

  Pop-up message windows allow only 6 options to select from?

  Thank you

  Hello

  You can do this by using the method of message popup. You can ask the user what unit want to run message by inserting in the expression of the message in the message popup step parameters. Something like below

  "Enter the number of execution unit.

  1 Unit1

  2 unit 2

  .......

  10 Unit 10 "

  then check the 'Enable response text box"tab is different from the stage. When the user enters the unit number you can get the value entered by the user by inserting the below statement post expression of message popup step parameters

  Locals.String = Step.Result.Response

  Note: The string is a local variable to be set.

  Convert string to number and send that output to pass the expression you can use a sequence of call step to call the sequence according to which must be performed. (I hope your each unit will file separate sequence)

  I hope that this solves your problem. If you do not understand please let me know so that I can put a small example and send it to.

  See you soon,.

  Krishna

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• If replaced missing antifr.dll file will help performance

  When power on get an error indicating that the file antifr.dll is missing and if replaced set the bad performance of the pc.

  Hi PattyOlbrys,

  Have you recently deleted or had no problem with security Radialpoint TITANIUM managed? What is your currently installed AV.

• Error message having to do with VSS/open files when you perform backups remotely

  When you back up by using services of Mozy for the last 2 weeks that some files could not be backed up.    Mozy did a few checks and they said it had to do with some files remain open.  They said it had to do with the Vss/open files, is there anyone out there who might be able to help?

  Hello
  • What version of Windows XP you are using?
  • What is you receive the exact error message?
  You can view these methods:
  Method 1:
  I suggest you try Windows back up and check.
  Here is the link:
  http://support.Microsoft.com/kb/308422
  http://support.Microsoft.com/kb/320820
   
  Method 2:
  You can also see the question in the boot.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.