File currupt inside my e250

Similar Questions

• How to access a PDF file imported inside a rectangle and move

  Hi, I have the following code which puts a PDF file inside a rectangle var f = new File ("C:/pdf.pdf");    var doc = app.activeDocument;  var thepdf = doc.pages [0] .rectangles [0] .place (f, false);  doc.pages [0] .rectangles [0] .fit (FitOptions.FILL_PROPORTIONALLY);  Now I want to spend "thepdf" (which is the type of PDF object), but I can only find a way to move the rectangle around it. I need to move the inner rectangle (PDF), as I would with the direct Selection tool. is this possible?

  Yes. It is possible.
  The PDF file placed inside the rectangle is the graphics object [0] of the rectangle.
  Or, if search you the collection of links, the parent of this link. The parent of the parent that is the container, the rectangle object.

  myRectangle.graphics[0].move(/*insert your arguments here*/)
  

  Move the PDF file inside. When the move() method could have different arguments:

  Adobe InDesign CS6 (8,0) object model JS: graph

  Uwe

• Place the edge Animation (file oam) inside the muse seems to be empty

  Hello

  When I am placing edge inside the muse animation, all that I can see is just the boundaries of animation, but not a preview image.

  

  any IDE how to fix?

  Hi Shlomiii,

  It's the behaviour expected of an OAM file, it does not show in the view Design of Muse.

  You can add a fill color to the animation in the Muse, to keep track of its location, and when you're ready to publish your site, you can remove this fill.

  Concerning

  Sonam

• Run as administrator does not not for files bat inside the folder names with special characters such as)

  Dear all,
  I am unable to run any file beats with "Run As Administrator" when the bat file is present in a folder that has (in his name.
  For example: I main.bat in d:\test (_8july) \main.bat.
  The content of main.bat is like that.

  c:\windows\system32\cmd.exe /C "e:\test.bat."

  The content of test.bat is like this:

  echo 'test' > %temp%/test.txt
  pause

  If I double-click main.bat, I can see the file text.txt being created and 'test' written in it.
  If I click with the right button on main.bat and select 'Run as administrator', cannot run the file beats and I get the error "d:\test" is not a recognized command.
  How to handle these situations?

  If I run as c:\windows\system32\cmd.exe /C 'd:\test (_8july) \main.bat' to 'Run' in Start menu cannot run little. It gives the same error "d:\test" is not a recognized command.
  If I run as c:\windows\system32\cmd.exe /C "" d:\test (_8july) \main.bat"" it can work and works very well.
  So, the question is when we choose 'Run as Administrator', it takes the file bat as insead "d:\test (_8july) \main.bat" of ""d:\test (_8july) \main.bat" is there a work around for UAC, we can pass the correct string

  Thanks in advance
  Rambeau

  Hi Raghu,

  Your question of Windows is more complex than what is generally answered in the answers from Microsoft Windows Vista forums. It is better suited for the IT Pro TechNet public. Please ask a question in theForums of Scripting on TechNet

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why does my destop files appear inside the folder my pictures?

  My Office files keep appearing within the My Pictures folder, but when I opened the main of my images by going to my user name folder, they do not appear here. My computer says that its current location on my desk. they appear on my desktop, but also on my pictures of my too. They are not shortcuts because every time that I remove them file my images, they are removed from my desk too! I just remove my pictures it is all, so how do I?

  My Office files keep appearing within the My Pictures folder, but when I opened the main of my images by going to my user name folder, they do not appear here. My computer says that its current location on my desk. they appear on my desktop, but also on my pictures of my too. They are not shortcuts because every time that I remove them file my images, they are removed from my desk too! I just remove my pictures it is all, so how do I?

  Hello

  Looks like you look at the image library folder.

  You can add any folder in a library, including a users desktop folder.

  Open the picture library where you can see these files.

  In the view on the right pane, click the includes: x link locations at the top left (x is a number).

  This will show all the folders that have been added to this library.

  If you see the desktop folder, select it and click Remove.

  This will remove it from the library.

  See the following articles for more information.

  Work with libraries

  http://Windows.Microsoft.com/en-us/Windows7/working-with-libraries

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

  Concerning

• How to put files InDesign inside InDesign w/purge of intact files?

  I put the files in InDesign to work within another InDesign document that is a model provided by the printer. Respect, I designed a book multipage and now need to put these pages with purge in a larger, the printer model a single page. No harm to put the files, but I'm not able to give one of my bleed pages placed. Any thoughts?

  Thank you very much

  Jim.

  Show Import Options... When you place and crop to bleed

• Installation BAR inside the Android virtual machine files.

  Hello everyone!

  Can someone explain to me the following problem:

  I have an Android app that can install any other Android Apps (think like that as a personal App Store for Android). Now, I want to convert to BlackBerry. What I have done.

  Now what I want to know, is how my application (BAR the file running inside the Android virtual machine) to install other files BAR? Y at - it any option (API?) that can escape from VM Android for QNX for I might be able to install a BAR?

  Thank you!

  Ricardo Teixeira

  This is not supported.  Third-party applications on BBX/BlackBerry Tablet OS are not able to install other third-party applications.

• Files in default\profile are not copied to the new profile

  I get conflicting information on how to create a generic profile to use throughout my organization. Using the Profile Manager is not relevant to my situation.
  I tried placing files/folders in the directory "Default\Profile", "Browser\Default\Profile" directory, etc, and nothing is never copied into a new profile.
  Specifically, I created a custom "userChrome.css" file I want to distribute. What I've read, a chrome folder must be created in the directory xxxxxxx.default of the user and the .css file placed inside.
  What Miss me?

  Thank you.
  Eddy

  You are welcome.

  Note that some features may work only with the official version on the Mozilla site.
  Also, some features may only work with the version US (*)

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• Time loop writing file of Rio - please help

  Hello world

  I'm writing the data collected on the 32 channels of a module 9205 to memory on board a Rio-9074.  This isn't the final requirement of the application, but this is the first simple step.  Both the FPGA Vi and Vi of the host are attached to this post.

  Writing to the file produced inside the while loop, so that the outside while segments of loop files from time to time (this segmentation is a requirement of our application).  I have attached a sample file of release in this post as well (the output file opens in wordpad).

  In the output file, the second and the third column is a timestamp with fractional seconds.  The lead time is 5 Hz, but if you see the first lines in the output file, you will notice that it sometimes jumps an iteration of the loop - the timestamp, from 0.6 s to 1 s instead of s 0.6 to 0.8 s.  This occurs regularly throughout the file.  No idea if this due to a physical limitation of the hardware, or the clock, or if it's because of something in my program?  If you could please take a look at my program and help me optimize my screws or give me suggestions on why this delay occurs, I would really appreciate it.  Please let me know if you have other questions too, and I will answer them immediately.  Thank you!

  P.S - Writing on an SD card on a 9802 using these programs also causes the same problem.

  Good afternoon Derrick.

  The following link describes the RT FIFO that I mentioned in my previous post.  It is the method you want to follow to get the data from your host RT to your PC so that you can save data to the PC.  It is a method of choice (when it is an option) because of the increased storage capacity of a PC (in general) and the requirement of transformation to write in the file on the host of the RT.

  FIFO in real-time for deterministic data transfer screws

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3934

  Alternatively, you can use something more similar to the example of "RT FIFO Communication.lvproj", found by searching FIFO in the Finder for example of NOR, to log on to the host of the RT.  Remember that you want to change this example; you don't want to write to the file in a timed loop because your hard drive / memory flash access is not deterministic.

• Why the input file dialog box prompt when I have to attach to a device?

  For my project I need to move a robot 3 axis from a list of coordinates set to be cut / draw a picture. The only way I can thnk to do this is to read the coordinates of a spreadsheet and calendar to read the details and send information to straight line move function (Softmotion).

  The problem occurs when I try to launch the program when it is connected to devices (motors). The line of file dialog is no longer present and 43 error pops up immediately. I traced the problem to the spread of vi map reading, but I don't know what to do because it is a standard feature in labview.

  If you could take a look and give me feedback it would be greatly appreciated, I learned labview on my own for about a month so if you can please use simple explinations.

  The cRIO running the operating system time LabVIEW Real-time.  The RT operating system doesn't have a user interface and therefore no dialog box.  You must specify the file in a different way, like sending an order by file path inside via TCP or published network of shared Variables.

• Can not find the Dupfinder file.

  I have Windows XP Professional with Service Pack 3. I also almost 10,000 hidden images, which I think more than 2/3 of them are duplicates. When I try to find the file "Dupfinder", by going to "Run" and typing in "Dupfinder; I can not find this file. I was instructed to download "Windows XP Service Pack 2 Support files", that has the file 'Dupfinder' inside, but I can't access that is. So, what can I do now? Is there any file to search for files duplicated for XP anywhere? I also believe that's what slowed my computer down so much. (I may be wrong here, but it is my belief).

  Try this program that will help you find the files duplicated in a manner more detailed, perfect and better-

  AUSLOGICS DUPLICATE FILE FINDER (only 5 MB)
  Download link -http://download.cnet.com/Auslogics-Duplicate-File-Finder/3000-2248_4-10964299.html?part=dl-6267754&subj=dl&tag=button
  This utility will help you more xp.

• I have a laptop running XP pro with office 2003. All of a sudden all the folders and files in the folders have read only attribute applied.

  This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
  Any solution to this problem s.

  Dave

  It's not a problem... it is a feature.

  At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized.  There are other methods available if you really don't want to do a write-protected file.  The details are explained in the following Microsoft KB article.  I recommend reading the article in full to understand what Microsoft did...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
      <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• Problems of extracting .zip files

  I am not able to unzip a zip file.  I tried using the "right click; Extract all' and also tried "Drag and drop" the files compressed separately off the compressed xxx.zip file/folder, like the MS HELP says to do, but neither work.  There is no error message, just nothing happens.  What is blocking the decompress/extraction occur?

  Hello

  Here are a few very good tutorials about it

  Compress and uncompress a folder or file in Windows Vista Zip (Compress) files and folders

  http://maximumpcguides.com/Windows-Vista/compress-and-uncompress-a-folder-or-file-in-Windows-Vista/

  Right click on a file or a folder with many files it contains, point to send to, and then select the compressed file (zipped file).

  Windows Vista will compress (zip) the file or folder and save the new file zipped in the same place as the original file.

  Unzip (unzip) files and folders

  You can unzip a file in several different ways.

  Double-click the zipped file

  To decompress a file, the easiest method is to double-click it.  It will open a window with the contents of zipped files.  You can click on extract all files or drag the files from the window to the desired location (example: office).

  If you choose to click on extract all files, the files will be extracted (unzipped) in the same location as the original file except if you specify that a location in her select a Destination and extract files in a box that appears when you choose to extract them.

  Right-click on the zipped file

  Right click on the zip file and select extract all.  The Select a Destination window will open and extract files and you can choose if you want to save the files in the same location as the original file, or you can choose where you want to save the unzipped files by clicking Browse and choose a new location.

  How to open Zip on Vista files

  http://www.ehow.com/how_4963978_open-zip-files-Vista.html

  1.  

     Double-click the file zip with the file zipped inside. A window should appear with the files inside.

  2.  

     Click on "Extract all files" in the top options on the page toolbar. The extraction Wizard appears.

  3.  

     Select where you want the files to be extracted. By default, Vista will extract them to a folder that has the same name as the zip folder, in the same place. If a file with this name does not exist, Vista will create a.

  4.  

     Click on "extract".

  5.  

     Your files will be unpacked.

• SFC/scannow can't repair corrupted files

  original title: RAN SFC/scannow have currpted files cannot get rid of them ran newspaper and he told me the members file name how can I del these files currupt Email removed for privacy

  has ran sfc scannow found cruppted of the windows file search journal first I ran microsoft Mr don't fix no newspaper help list the names lik / / can't fix the military record [01:25 {12} "settings in the microsoft-windows-bar side.

  How can I remove this file please

  E-mail address is removed from the privacy *.

  Hello

  Download Autoruns and check under the tab Sidebar Gadgets - remove anything which is a yellow Standard
  Folder marker and/or points to a temp area or non-existent.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ===========================================================

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.