file IO, getpwd instead of $HOME?

Similar Questions

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• I used my USB key to work and computer encypted here my files. Now, he won't open all files on my PC at home. What should I do to recover my files?

  I used my USB key to work and computer encypted here my files. Now, he won't open all files on my PC at home. What should I do to recover my files?

  Hello

  You will need to work with the IT Department. to work to get the files not encrypted on the disc so that you can
  use the disk and the files at home. "" They could add ability to encryption of your system at home
  If you need that and they allow it.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why windows 8 poster file in KB instead of mb?

  My Windows 8 windows Explorer displays the files in KB instead of mb, why?

  Windows has always displayed sizes of files in KB.

  It can be changed in Windows.

• File not found: Windows XP Home Edition - 000002.vmdk

  When I restarted my iMac today, and attempted to restart my VM Fusionware, I got this message: file not found: Windows XP Home Edition - 000002.vmdk.  He offered to let me search for it and I can't find it anywhere.  So, I inserted my VM fusion drive and reinstalled and updated to the current version - and it still says it can't find the file it needs to run.  What should I do?  I lost all my information, like all my files from MS Money?  I had planned to migrate to Quick Books for MAC this summer when I had fun.  I didn't do it all from scratch.  What should I do now?  I delete all files dealing with the merger of VM and do a clean reinstall?  Is anyway to get my MS Money information and the email client I use PocoMail or is all lost?

  Hello

  As noted in the Continuum, you need not to 'access' merger to do what was asked. We work only on the iMac here. Do a search/search for files ending in hard.

  What commands you issued before trying to start using the virtual machine.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• How can I batch of E-mail files in folders instead of one at a time?

  I save my subscription by E-mail in separate folders but I've been lax in filing and have more than 700 to file. After is sorting by sender a way for the batch instead of one file at a time? I use Thunderbird 38.01

  You use the methods of standard selection on the computer.

  Select message 1, up or down several message and hold the SHIFT key while clicking on the message 2 = this will select message 1 and 2 and all the messages between the two

  Hold down the CTRL key while clicking random messages = this will select any message clicked on.

  When you have selected messages you can right-click and select move to or drag and drop. Moving to is easier and more reliable when you work with multiple messages.

  I will not try and move all messages from 700 in one shot. Break it down into smaller batches.

• PDF file print symbols instead of letters/numbers

  Hello

  PDF file prints (square) symbols instead of letters/numbers. I've tried different printers, assume that is not a defect in the print settings that the problem occurs with all used printers. What can I do? Would appreciate a step by step description possible solutions. Thank you.

  Open the application book fonts. Select all the fonts, and then select "Validate fonts" in the file menu.

  Additional instructions can be found here: the basics of the Mac: font - Apple Support book

• Cannot display PDF files, automatically download instead

  I use the pdf viewer integrated for centuries without problem. Today, for the first time, I found that I could see is no longer notes pdf for my Korean online courses. Instead, a record/download dialog popped up.

  Initially this problem included all THE PDFs that I tried to open it in FF. It has been about 6 hours at this point, which is crazy - and I went through a considerable amount of solving the problems of methods (not necessarily in that order, apart from the last two):

  • Installed Schubert PDF Browser Plugin.
  • Disabled the PDF Viewer integrated via preferences > applications and move to a different Viewer: schubert... always had save box.
  • Installed the plug-in Adobe PDF... couldn't use (I use a Mac os x 10.7, + the plug-in Adobe is buggy and not a viable option for me)
  • Delete the mimetypes.rdf... no changes to the file.
  • Launched FF in safe mode... no change.
  • The built in Viewer again activated via preferences > applications > portable document format (pdf) > Preview in firefox.
  • Check that "pdfjs.disabled" has been switched to 'false' in subject: config... It has been.
  • About: config I have reset "plugin.disable_full_page_plugin_for_types" by default, and then change the value to: ' video/mp4, application/pdf '.
  • Delete the mimetypes.rdf file.
  • Re-initialize the plugins database.

  The problem continued until I reset my plugin database and tried to delete the mimetypes.rdf again and make another restart.

  Now it seems that most pdf opens fine with the integrated Viewer and schubert. However the site which I fell initially on the problem with: http://www.koreanclass101.com doesn't open PDF and still opens the Save dialog automatically whenever I click on open the pdf links. It also does the same thing when I get the pdf directly in the address bar.

  I have to pay a subscription so I'm not sure, you can go to this link without being a student, but here it's just in case: www.koreanclass101.com/pdfs/BB_L5_051611_kclass101.pdf

  (to note this page of links to another pdf file that is not hosted on koreanclass101, and this pdf that opens now fine for me.)

  I tried to clear the cache and cookies to koreanclass101, but even after this, the problem persists. I wonder if the fact that it has Korean text on the PDF of the questions at all? Although I don't know why he would do.

  I really need a fix for this! The teachings are based on the ability to switch at the back of the audio in pdf format IN my browser. When I open the PDFs with preview and run interactive lessons in FF at the same time, FF slows down to a crawl and begins to hang whenever I go back and forth btwn programs.

  Weq12 wrote:

  Content-Type: application/pdf Content-Disposition: attachment;
  

  As you can see, the Content-Type is correct, but a download prompt is forced with the Content-Disposition: attachment header. Install the add-on from InlineDisposition, then click on the PDF link again. It should then behave as you specified under Options - Applications.

  • https://addons.Mozilla.org/firefox/addon/inlinedisposition/

  You are welcome.

• With the help of files from a Linux saved / home folder hierarchy, how can I get these bookmarks in new installation?

  Prior to this announcement, I read the information available on import-export-backup but unfortunately, I became very confused.

  Location:

  On my PC at home, I backed up my Ubuntu + Mint/home folder [dual-booting to installation] trees on a flash drive. In the two Ubuntu + Mint, I used Firefox 3.6.3

  Now, I installed Mint with Firefox 3.6.3 on a new hard drive.

  In my new installation of mint + Firefox, how to use the files in my backup folder trees / home to give my new Firefox these same bookmarks?

  I have never "exported" or "supported" My Favorites; I just copied my trees set/home folder on a flash drive, assuming that the files would be there when I need them. I see a bookmarks.html file in my new installation, but it seems only toolbar links and not a few bookmarks, I created in the past days. And I don't know what to do with the file "places.sqlite".

  Should I find "places.sqlite" files in the backup folder tree / home and copy / paste them somewhere on the new hard drive?

  I didn't want to risk experimenting this - could hurt!

  Thank you very much.

  Firefox 3 and later no longer use bookmarks.html to store bookmarks.
  
  You can restore latest JSON bookmarks in the folder bookmarkbackups or copy places.sqlite on current Firefox profile. Both methods will replace the current bookmarks with the new bookmarks, so I you must preserve existing bookmarks and then export them to a HTML file and import this file later.

  See:

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Error: File Asms needed Windows XP Home edition after repair of operating system. (Windows 7 upgrade)

  Original title: asms file necessary windows xp home edition, after operating system repair.

  I know it's old but I try to get on my mothers pc so it can transfer files to a drive hard usb. This computer had virus in there and caused certain files be rearranged. I took out the virus

  I could not access the Device Manager as he disappeared. The computer does not recognize the hard drive usb, so I decided to fix the pc using the re installation disc.

  The computer fixed itself, but now I get this message saying file asms is necessary. I tried to use the steps in this article (311755 KB), but still the same problem. I would like to use the recovery console, but I do not know the password for the administrator of safe mode.

  The computer that had repaired the operating system is a dell dimension 2350 and I used the original windows xp disc.

  I have a disc of windows 7 but the graphics card on the computer is less than adequate. I was wondering if I could calm down the graphics in the windows Classic theme for windows 7 will work and is it possible to save files because the computer is always on the xp Setup

  Your specifications (RAM) are not quite the minimum requirements for WIndows 7 as shown here:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  However, Microsoft recommends 128 MB of RAM for XP as shown here:

  http://support.Microsoft.com/kb/314865

  So I think that their minimum requirements are a lot of hooey for most environments.  He can run, but you're probably not going to it.

  If you want to see if you can get your work in XP (I'm not familiar with this problem), if you do a little research on Google for phrases like claire XP administrator password, I forgot XP administrator password reset XP administrator password, etc.. I'm pretty confident that you will find a way to go beyond this little bump on the road.  Simply clear the password and be on your way.

  We are supposed to simply not to tell you how to do such things, so I fall just a few tips :)

• How can I run a search to find all PST files used in the disks Home users?

  Hello

  I need to know how to run a search for my server files (windows Server 2003) to find all the PST files that are located in a disk of home users - including subfolders

  However I need research to tell me what PST files are in use. (active)

  Is anyone able to help me with this?

  Hi Gonz1981,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is linked to the search server .pst files. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Installed Windows Vista Basic instead of Home Premium and now my product key will not work. What can I do?

  I have purchases product code for Vista Home Premium. I couldn't find the disk, so I installed Vista Basic. Microsoft does not authorize the premium code to record the "basic" program How can I get the two to work together on my machine? MS will not let me get the program of upgrading without registering to the basic version... and on, and it will.

  original title: update windows

  Hello

  Microsoft is correct; you need the correct product key for each specific edition of Vista.

  These information from Microsoft about replacing lost software should help you:

  http://support.Microsoft.com/kb/326246

  Then you can install it properly.

  See you soon.

  PS If you use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as well as 32-bit and 64-bit editions different DVD lights.

• Cannot restore file bkf NAS to Vista Home Premium disk XP

  I have a HP Pavilion a6220n PC desk top running Vista Edition Windows Home Premium.  Exploitation is corrupt is a couple of weeks, and I haven't had a recent backup of the C drive.  (I know...)  In any case, I could take the Vista machine's hard drive and connect it as a second hard drive on my XP machine.  Then, I was able to make a file bkf HD Vista on my 1 TB MyBookLive NAS drive.  Then I put the HD Vista on the Vista PC.  And I was able to run the recovery partition recovery procedure.  Of course, he wiped the C drive but Vista works again like factory.

  So now, I need to restore the file the MyBookLive drive on the Vista machine bkf.  I thought it would be easy.  I discovered that the restoration of Vista does not recognize the bkf file types.  But the Vista restore utility had a link explaining that I could download a backup NT and restore and it would be able to restore a bkf file type in a Vista machine.  So I downloaded the NT utility.  But when I ran, the NT utility doesn't seem to be able to find the MyBookLive disk.  It does not seem to have all the options restore from a network drive.

  So my next bright idea was to buy a Toshiba 1 TB USB HD.  I figured I'd just copy the NAS MyBookLive to the Toshiba HD bkf.  I tried on the XP machine, and I got an error that says I don't have enough disk space.  I guess this means that the C XP disk doesn't have enough free space, because the MyBookLive and Toshiba HD have enough free space.  Moreover, the bkf file is LARGE (355GB).

  OK, so I decide to use the Vista machine to copy the bkf file.  I can map to the NAS MyBookLive and see the bkf file.  And the Toshiba HD is automatically recognized by Vista.  The C-drive Vista has 327 GB free.  And again, I got the same error - not enough disk space.

  I started to compress the bkf file in a file of rar on MyBookLive, using the XP utility.  Original estimate was 66 hours remaining.  I decided to give up this idea because I don't know if it will even work and wouldn't wait for 66 hours to find out.  My hope was that if the compressed file was smaller, so I could copy the compressed on the Toshiba HD.

  So here I sit with a disk network MyBookLive bkf file.  And I need to restore this information on the Vista machine.  If anyone knows how to restore directly from the network drive MyBookLive to the Vista, which would be preferable.  Next ideal if anyone knows how to copy a file, bkf 355GB since the network MyBookLive on the Toshiba USB HD drive, then I might be able to restore from the Toshiba USB HD on the Vista machine.

  Any ideas would be appreciated.

  GEEK SQUAD came to the rescue. Agent Hugo Westminster, CO Best Buy suggested I get the error "insufficient disk space" because USB Toshiba HARD drive is formatted in "FAT32" format of file at the factory.  He recommended fitness to "NTFS".  I did and was able to copy the large bkf file (it took about 12 hours).

  I have now connected USB Toshiba HARD drive into the Vista machine.  And "NT Backup and Restore" was able to recognize it.  It is now trying to restore the backup of the files on the desktop to Vista PC.  I'll know in a few hours if the restore was successful.

  The restore operation did turn out to be successful.

• CD burner is burning the music as a file of data instead of music? I think so???

  I tried to burn a CD of music with WMP.  When I insert the disk it says MB remaining, instead of remaining time.  The files to burn to the CD, but appear as data instead of music files.  The burner Burns DVD fine and has no problems burning data on a CD, the music seems to be the only problem.  The problem does not seem to start until I started burning DVD recently.  Any suggestions?  I get no error messages or anything like that.  Just don't burn the files like music?

  I tried to burn a CD of music with WMP.  When I insert the disk it says MB remaining, instead of remaining time.  The files to burn to the CD, but appear as data instead of music files.  The burner Burns DVD fine and has no problems burning data on a CD, the music seems to be the only problem.  The problem does not seem to start until I started burning DVD recently.  Any suggestions?  I get no error messages or anything like that.  Just don't burn the files like music?

  =======================================
  What is the extension on the files that are on the CD?

  ADC?  WMA?  MP3?

  Perhaps the following article would be not worth the detour:

  Windows Media Player 11 for Windows Vista
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  (Expand the title: "Burn audio CD")

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.