File IO on local

Similar Questions

• Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

  I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• I would like to synchronize automatically 2 files on my local drive?

  I would like to synchronize automatically 2 files on my local drive?

  Accessories windows Sync Center doesn't seem to be good tools.

  I would like to synchronize the files that someone shared with me via Google Reader (it is the oner) with a second folder on my local (in a sub folder in my documents)
  What should I do?

  Thank you

  Hello

  You may need to get a third-party synchronization software by using your favorite search engine to perform the task.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Given that the other person is the owner of the file, he or she may also need to give you permission to share the file/folder.

  For more information, see the article:

  What is Sync Center?

  You can also see the links in support of Google and check if that helps.

  Sync files shared with you

  Synchronization of files and folders

  The problems of Google Drive

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• It is possible to write data to files on a local computer using util_file instead of the server?

  Hello

  I use oracle 10g. It is possible to write data to files on a local computer using util_file instead of the server?

  Concerning

  PL/SQL is a programming language on the server side. So the answer is no if you have a shared drive on your server that points to your client you can. But that opens all kinds of security problems.

• Copy a data file to a local diskgroup remotely a diskgroup

  Hi all

  RDBMS...: 11.2.0.4 (64-bit)

  Then...: CentOS 6.4 (64-bit)

  I do a few tests here with transportable tablespaces, and I got stuck in how to copy data directly from a local DG to DG distance in another server. I'm trying to do to make the time as low as possible (I could copy the data file of my DG of a system of local files and after that via asmcmd cp, copy this data file, through cp, for the remote server, but it might take a while with giant data files).

  The question is: is it possible to copy a data file to a local DG to a distance DG (another server) directly?

  Thanks for the attention.

  Hello

  Yes

  You can copy the DG to DG by using ftp.

  http://emrebaransel.blogspot.com.tr/2010/04/transferring-Oracle-files-between.html

  Concerning

• Download a file from a local data store

  Hi all

  I was wondering if it is possible to generate scripts downloading a file from a local data store on a Windows Server? Also, there are scripts available to perform such a task?

  Thank you

  Hello

  Just guessed myself using the cmdlet copy-datastoreitem - good KB article here

  After the connection to your vCenter server, connect to the data store and mount the source as a PSdrive data store, and then use the cmdlet.  It also works well download a data store and the downloading of a data store: just spent around objects in - point and - Destination.

  At first glance, it seems that you need to know the source path of the data store.

  $dstore = get-datastore "YourDatastoreName"
  
  New-PSDrive -location $dstore -name dStore -psprovider vimdatastore -root '\'
  
  copy-datastoreitem -item dStore:\VMFolder\VMConfig.vmx -Destination c:\SomeFolder\vmconfig.vmx
  

• Copy files from the local PC folder to the VM folder

  I would like to copy files from my local PC file to a Dtx200 (which is the data store for my data center)

  I used the following commands:

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  the error I get is can not find the drive named SAN2

  However if I use the following commands

  Get-data-server store < my VM server IP > -name "SAN2"

  I get

  Name FreeSpaceMB CapacityMB
  ----                               -----------      ----------
  3938452 4766208 SAN2

  now I use

  $datastorename

  = Get-data-server < my VM server IP > store -Nom "SAN2" | New-DataStoreDrive-name datastorename

  Copy-DatastoreItem-point

  $SourceBuild_ISO -Destination datastorename:\BHM\BHM_ISO_IMAGE-Force

  This method works. (New-DataStoreDrive performing a mapping to the real data SAN2 store)

  However, New-DatastoreDrive is an alias for a command (for New-PSDrive) sometimes gives the error that New-DataStoreDrive is not a valid cmdlet and sometimes it works well

  If I want a copy of the files in my local PC file to a Dtx200 (which is the data store for my data center)

  use the following commands directly? Why do I need to map a drive to the data store?

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  No explanation? Suggestions?

  The path to your data store that you must supply the parameter - Destination must begin with a drive of psprovider.

  Try it like this

  New-PSDrive-location (Get-Datastore SAN2) - ds name - PSProvider VimDatastore-Root ' '

  Copy-DatastoreItem-point $SourceBuild_ISO-Destination ds:\BHM\BHM_ISO_IMAGE-Force

  You can also use the readers of vmstore or vmstores.

  These 2 are there automatically after a Connect-VIServer.

  Given these discs start higher up in the hierarchy of vSphere, you will need to fit the destination path.

• Help! Deleting files in the local folder removes the Mac HD files.

  After having "achieved" remote folder together, all folders on my desk and all the folders and files related to them (in thousands) appeared in the files of my Local folder Panel. And each of them had a character more next it. Worse, deleting one of these files delete the actual file to my desktop and Mac HD. What can I do?

  The + means that it is a folder, click on it to see the files that it contains.

  DW does not store the files, just some organizes and works with the files on your desktop, so to delete a file in DW it will remove your HD. This is the expected and correct result.

  When you define a site, you must create a folder root for your site to store files (do not use your desktop folder). If you do not create a folder of root to work from, I could see all your office supplies including accidentally in your site. If this is what happened, you need to redefine your site: http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

  Everything that was deleted should be restored from a backup, if that's what is happening.

• A single file in my local folder of RoboHelp 10 which can be copied on the application server?

  Nice Hello Pals, (this is Vipin Nambiar in Bangalore)

  I am currently evaluating Adobe Robohelp 10 version for one of my writings of technical architecture. Requesting assistance to the earlier hedges high time below Said.

  I have completed my technical for writing internal application system and have generated and view available main (with the permission of the file -> display -> main layout.) as content, Index, Glossary and would like to be hosted on the server so that all users of this application can access these contents, Index, Glossary and act as a know-how notes to use this application.

  Is there a single file in my local folder to Adobe RoboHelp 10 which can be copied on the application server?

  (My local Adobe RoboHelp 10 folder

  (a.) subfolders called ! Language!, ! ScreenLayout!, ! SkinSubFolder!, ! SSL!

  (b) Types of files called *. ALI file, *. File of the APJ, *. Bitmap image, *. BRS file, *. Cascading Style Sheet Document, *. CPD file, *. File FPJ, *. GIF image, *. File GLO, *. H file, *. HHC file, *. File Perfect, *. HHP file, *. HTML document, *. HTT file, *. Image JPEG, *. JScript Script file, *. LDB file, *. File PPF, *. PSS file, *. RoboHelp HTML Project leader, *. SSL file, *. XML document)

  Any help here will serve me to plentious

  First of all, your username cannot be changed and it is not a good idea to have visible on any forum email addresses, unless you like to read the spam.

  This issue is addressed in the online help. When you create an output that it is generated in any folder you specify in the source schema. What is in this folder go to the server.

  If help is in! SSL! > WebHelp, so everything in this folder, including subfolders is what it takes to go to the server.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to remove unwanted files from the local root folder of the site?

  Hello

  I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

  Any help or ideas will be of course very appreciated, thanks, dluthier

  I guess you mean 'work' files, not the images that you use in your Web site.

  If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

  In my way of working, I have a folder for each client that includes:

  • The correspondence of this client folder
  • Folder to 'Work'... the PNG images, etc., or of the images from the client
  • Record the site root

  When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

  Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

  That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

  To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

  On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

  If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

  Who will save you from actually having to 'write' file names!

  Z

• FTP the files to the local folder

  I had a web site created by a development group. Now, I would like to change the site myself. I use dreamweaver to connect to the remote site on the web server - through a link ftp:filename. The tutorials show that it is better to change the site locally and then upload to the server.
  How can I transfer the files from the local web server in a computer root folder?
  Louis Colombo

  Hi Louis.

  Open DW and connect to the server. Select "Remote View" to see what is
  the server and select the root directory of your site, and then click the button 'Get '.
  (green arrow pointing downwards). You will be asked if you want to get the whole site.
  Click OK and the site will be downloaded to the local directory you
  specified when you set the site in DW.

  I hope this helps.
  John

  "sambrog" wrote in message
  News:go1fpf$8vf$1@forums. Macromedia.com...
  > I had a web site created by a development group. Now, I would like to change the
  > site
  > myself. I use dreamweaver to connect to the remote Web site
  > server - a link of ftp:filename. The tutorials show that it is
  > better to edit the site locally and then upload to the server.
  > How can I transfer the files from the web server to a root on the local computer
  > file?
  > Louis Colombo
  >

• SWF file contains Ref. local dir structure

  Newbie here; I'm sorry.
  
  Flash CS4 Professional, version 10
  
  Creates a simple video flash to get wet feet. In the process, I'm drowned.
  
  I created the video with Flash (ActionScript 3.0) by inserting a player object and specifying an f4v source that I created using the Media Encoder CS4 to convert a wmv file. nothing to it.
  
  Publish an extract worked fine. Publication/Publication settings created the necessary files, as described in tutorial Flash 411:
  http://TV.Adobe.com/?TrackingID=EBYHH & SSP = fl_10.0.0_win_en_full__PF_20040226 #VI + f1527v1000.
  
  Video works fine on my local PC (XP, SP2). But when I load it on my server, it does not work. In IE 7, loading the page. the source code is there, but the window is empty: http://www.bbhq.us/pva1.html
  
  Adding to the .htaccess file mime type does not solve the problem. Change the permissions for the files was not, either.
  
  It is apparently not a server problem. A simple swf file created by Mr. Gates and HTM simple coding works: http://www.bbhq.us/flash3.htm
  
  Mr. Gates, that knows that I don't have?
  
  Well, where to start?
  
  However, when I loaded my file- http://www.bbhq.us/pva1.html - in FireFox 2.0, I got a blank window, but also the revealing error message:
  
  SecurityError: Error #2148: SWF file http://www.bbhq.us/pva1.swf cannot access
  local resource F:\pva1\pva0117a.f4v. Only local - with file system and
  reliable local SWF files can access local resources.
  at flash.net::NetStream/play()
  to fl.video::VideoPlayer / http://www.adobe.com/2007/flash/flvplayback/internal::_play()
  to fl.video::VideoPlayer / http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
  to fl.video::VideoPlayer / http://www.adobe.com/2007/flash/flvplayback/internal::_load()
  at fl.video::VideoPlayer/load()
  at fl.video::FLVPlayback/doContentPathConnect()
  
  Which tells me that the swf file has my original directory location and name (s)--f:\pva1\...--incorpore in there. No wonder!
  
  However, I don't see where in Flash I Specifies a directory structure for my video, other than, of course, when I specified the original video to add to the Player component. But somehow, the swf file again the structure of directory under the file names. This boat is not floating.
  
  Help Adobe don't throw me a life jacket; He threw me a lead weight, instead.
  
  Must be parameters to publish somewhere, or miss me something obvious that I can't see.
  
  Goin ' down here for the 3d time. A little help here, please.
  
  Thank you.
  
  

  Thanks for your quick response. But he left me still treading water.

  Yes; got to the Inspector of content; The settings that I see are:
  align
  AutoPlay
  cuePoints
  islove
  Overview
  ScaleMode (ScaleMode)
  skin
  skinAutoHide
  skinBackgroundAlpha
  skinbackgrundcolor
  source
  volume

  There is no property/setting contentpath.

  This is help page refers the contentpath that you referenced:

  http://help.Adobe.com/en_US/Flash/10.0_UsingFlash/WS0ED77F00-2006-49aa-8399-92B6D5D8CE00.h tml #WS9A834D6F-8206-4e07-B840-456EF90C03CB

  He described the contentpath as you suggested:

  "contentPath (AS2 files) string that specifies the URL of a FLV.

  The reference to AS2 in parens jurisdiction suggests that this setting applies only to the AS2 files. Or, perhaps, this setting is not applicable in CS4, version 10. I donno, but I of course do not see it in my version of Flash.

  However, you and the help page throw me a lifeline. The f4v file already loaded on my server, I changed my project, specifying, as the source parameter, the name of my file fv4 when it is loaded on the server - http:www.myserver...fv4--pas file on my local PC. When published Flash project, he uses the name, without reference to my local directory...

  Of course, the f4v file must exist on the server for him to publish correctly.

  Who did.

  It makes sense, but it is certainly not obvious and it is not explained in any documentation I found.

  Am I the only one to whom it was not obvious?

  Thank you; you led me to a solution.

  JJT

• How to open e-mail files old place locally in my Thunderbird profile

  I have several old e-mail files that are located in the subfolder imap to my Thunderbird default profile which is held in Appdata/roaming/thunderbird.

  Email accounts are no longer active on the net, but now I need to see an old email for several years and I cannot work out how to get that back in Thunderbird so that I can read.

  Install the ImportExportTools extension.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  This will allow you to import existing e-mail files from the old IMAP account in your local folders account.

  Note that the e-mail files are mbox files.

• Can't access my files. to open local files, but none showed

  I moved my profile to a HD with more space (and one that has been shared on my network) because I had too little space on my boot drive. Now, when Thunderbird opens, I get a screen with a tab saying Thunderbird Mail - local folders, but the folders pane is empty. The settings for this account seem to be all correct with good addresses for profiles and mail. I thought that maybe there would be something wrong in prefs.js. There is no file prefs.js on one of my drives and none on my backups going back a full year.

  How can I get Thunderbird to access my e-mail?

  You can try this... do the profile.ini point the file to the new location of the profile.

  see section called Modify profiles.ini to point to the new location - Advanced   at this link:
  

  • http://KB.mozillazine.org/Moving_your_profile_folder

• How to hide files in the Local C drive?

  I opened the local C drive and clicked on the file of Windows. I then clicked to view the files and now do not know how to hide them again!
  Stupid probably and perhaps siple to sort - but I don't know how and I don't want to delete anything in the folder by mistake.

  Open Windows Explorer. Click Tools > folder options > view > hidden files and folders.
  It use option Show hidden files and folders.

  That s it!