file .mov to give me a "the file you have specified in invalid or incorrect. Be sure to specify a valid file.
I am a new user to Captivate 8 (7 used for about the last 6 months) and am trying to use my first video in a module. The interface makes it look pretty easy: when I use the 'media' on the top icon, or if I go to video>insert video, I get a pop very simple dialog box "insert video". If I use 'event' or "Video Multi-Slide-synchronized", I get the same error. I'm just browsing through the film which is on my desk and I get the error that I show above.
I don't see any other options, and I can't find a lot of documentation more about these options (though I doubt it would help). I guess that the problem must be the video files, but they are pulled directly from my phone and sent to my office. Standard .mov files. Capt8 said that he supports .mov, so I'm lost. Any thoughts?
Thank you
Carl
I've never had trouble with .mov files myself, but you can always try to re - encode the movie to a different format. HandBrake is a simple free software that lets you do that, and I don't know that there are other institutions.
Tags: Adobe Captivate
Similar Questions
-
Hi all
Need your help with customization of the script here is the steps I've done so far
1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)
2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article
C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows
3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server
C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp
4. After you have done that, I've created a script under customization script called "testsript".
5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI
6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.
Troubleshooting done by me:
I have readded the VC Server Manager to view but it force worked
Thanks in advance for your help
Kind regards
v
If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp
For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called
Windows XP SP2 deployment tools
The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.
----
-
I need to re - install Acrobat 9 Standard. In adobe 'My account', I see my order but when I download the said: "You have no download" what can I do?
Hi ChrisTruc,
Please try to download Acrobat 9 standard of: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and use purchased serial number to activate the software.
Kind regards
Rave
-
Update of the question "you have not a plug-in compatible digital publication.
Hello
I've recently updated to Folioproducer tools 30.0.0 and Folio Builder 30.0.1.
The use of CS5 in Windows 8.
Always get the error "You have not a plug-in compatible digital publication.".
Reinstalled Folioproducer and Folio Builder several times, but could not fix it.
Even the workaround described here http://helpx.Adobe.com/Digital-Publishing-Suite/KB/error-do-have-compatible-digital.html did not work.
Any ideas?
Hi Bob,
Thamks for the tips!
I solved it now.
The DPS in Adobe\Adobe InDesign CS5\Plug-Ins\Graphics plugin installed files were in another Adobe InDesign Plug-ins folder.
So I moved in the plug-in folder where Adobe InDesign CS5 is installed and it worked.
-
I get the message "You have been disconnected" - can not connect to download applications
I get the message "You have been disconnected", even after the CC update. I created a new account today and have tried to uninstall and reinstall CC, but nothing has changed.
Cannot access my account = impossible to download or access the apps that I need for work.
After checking the forums, it seems to have occurred to many people. I wouldn't not so antsy if it wasn't for the fact that I need to immediately access a project.
The cat does not, so someone please HELP!
Val
OK, so I've resorted to Twitter, but a lovely person under the name of Britt @AdobeCare gave me a helping hand, we were able to solve the problem. I post the links she sent me, I hope they will be useful to anyone who has the same problem.
Solution 2 is what did it for me:
http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html
I'm on a Mac, and the only problem I have encountered, it was that I couldn't reach the folder from the library of my user name (I think that the file was hidden) which prevented me to find the file opm.db that should be deleted.
If this happens to you, try this:
Open Finder, click Go (next to file, display, editing, etc.) and click go to folder...
Then type in /Users/ [insert your profile name] / Library/Application Support/Adobe/OOBE
That will reveal the opm.db that needs to be deleted.
Click here for other ways to find the hidden folder: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
This is ultimately what has worked for me. After you delete the .db file, I revived CC and signed without problem.
Hope this is useful to someone!
XO
Vale
-
problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?
-
I get the error: you have exceeded the number of USB devices supported
I get the error: you have exceeded the number of supported USB devices. I read that a single USB can access up to 127 devices and I just plug in 20 (would do more). I use a hub 4 ports that is powered and port hubs of 2 to 10 who is also powered so I don't think it's a question of power. Operating system is Win7. Thanks in advance for the help.
They stop at Z
-
I get the message "you have been disconnected" when I try to sign in to creative cloud...
Lutavs operating system that you are using? You use the steps listed in error: you are no longer connected to Cloud Creative applications? If this isn't the case, please feel free to update this discussion if you have any questions about the steps listed in the document.
-
The disc you have inserted not readable by this computer. What?
I have been using an external hard drive (usb) for a few months. As I was falling images to save the disk I got an error that the disc is not readable. I have important files out there that has not been supported until a second source, how to make my computer to recognize the drive without formatting! I can also see it on my disk utility, but it won't allow me to repair the disc until I have format. What are my options?
Try resetting the SMC and LANDAU with disconnected JEP, then re - connect and test. If you used another drive as your Time Machine backup, then the DHM has probably also been backup on it. If she has no HD doesn't have, so you can try the recovery of data such as DiskWarrior or DataRescue software and so those who fail, you may contact a data recovery service. Go on, ALWAYS make sure you have a redundant backup of all your data.
-
Each week, I run chkdsk, disk cleanup and defrag but ' end defrag I was wondering should I defragment it even though it says "You don't need to defragment this volume" I remember that someone said to defragment your volume once a week or once a month. I'm so confused: / what should be my routine? defrag every week or once a month? Help please ~
Contrary to what said Divya R I would run a week Disk Defragmenter although you see "you don't need to defragment this volume." The report is based on a statistical analysis and figures produced in this way on a global scale can often be misleading. You can manipulate the numbers to present the result you want to see.
An obvious defect, is that the analysis is almost certainly done on all files. However, the files that you always have access to are only a small proportion of the whole. You want to be able to access the files that you are using the large archive of that rarely used files.
Supplied with Windows XP Disk Defragmenter is a utility written more than 10 years that you might want to try Defraggler which is freeware and a more flexible tool. I used it successfully for 2/3 years before I migrated from Windows XP to Windows 7.
http://www.Piriform.com/Defraggler/downloadClick Download from Piriform. com after the version to get the freeware version.
-
the last time that I update it this is in version 5, but when I click on update download update again and suddenly, it was frozen and the result when I start my bb is reload software: 507
I read on the forums, but I can't work with this
Hi and welcome to the Forums!
On your PC (you cannot do this on MAC):
1) uninstall all the BB OS packages from your PC,
(2) make sure you have the BB Desktop Software already installed
(3) download and install to your PC, the BB OS package you want:
(4) If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:
- C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
- C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML
(5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.
Do not forget to save.
If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:
- KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software
Good luck and let us know!
-
The object you have requested is not currently available in Apple music in India.
"The object you requested is not currently available in the music for Apple in India." I see this error when I select an album. I'm not able to see the album. I am able to see only ablbum when I connect, but when I connect with my apple id I can't find this album.
It is not available in India, the message said.
This means that the copyright holder has no have license to distribute in India.
-
Toolbas displays the messages "you have 1 alert to phone" and you have errors of PC (9)»
pop-up message on the toolbar to the right of the Bing search between translation and button sets. "" You have (1) phone alert "and alternates with you PC (9) errors" If you click on that, it wants to install a uniblue driver scanner that wants you to pay for the new updated drivers.
How to block this kind of activity?Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.
Make sure that you update each program to get the latest version of their databases before scanning.- http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
- http://www.superantispyware.com/ - SuperAntispyware
- http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
- http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
- http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
to remove the message "you have files to burn.
I hae images on an external drive (My Book), and it won't let me copy on a CD - R. I tried several times and the above message appears but does not accept blanck drive to copy the images.
Help!
8 000 photos are probably more the capacity of 700 MB CD. You will need to make sure that there no ROM then 700 more data.
-
After Update Firefox on all November 9, I lost the list of bookmarks that I had before and it could access it from my homepage. Now it does not appear there. When I followed the instructions on your mozillazine.org help page, it says to find a profile file that does not exist with this version.
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
Maybe you are looking for
-
Helix Gen 1: how to activate EUFI after new installation?
I was sick and tired of the obscene amount of space the recovery partition took the my Helix and wanted a new 8.1 instead of an 8.0 upgrade facility. I had a lot of issues with my Helix of USB boot, until what the legacy BIOS setting. Once I deleted
-
Input analog don't read do not correctly in normal mode
Hello I try to perform a simple test using Keithley KUSB-3102 like interface that sends a Dout of + 5v and the bed on the Ain. External circuit consist of a mosfet as a switch that puts the + 12v power to a relay and yes I am new to LabVIEW environme
-
I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Pr
-
My HP 3 year all-in-one C4280 shows USB not connected and "device not detected.
Everything works OK until a few weeks ago. I uninstalled reinstalled. During the installation, there is a message' device detected"and then at the end of"device not found ". Also USB not connected. Switched USB to another port, nothing helps. Contact
-
new black cartridge will not print
OfficeJet 6500 AIO e709a Windows Vista I installed new black ink cartridge. I made a few photocopies and had no problem. Today I can't print black at all. It prints color only. I did all the troubleshooting - cleaning the print head, align, print the