File permissions for the UNIX file created by ODI

Similar Questions

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• Lightroom CC "User permissions error" - cannot change the permissions for the folder Preferences

  I noticed that Lightroom was running slow so I thought it was time to take stock. (I was using Lightroom 5.7). Yesterday, I downloaded the last LR update, which is Lightroom CC [1067055]. I thought that Lightroom CC would replace 5 Lightroom but apparently they have downloaded as separate applications. When I tried to launch Lightroom CC I got an error message indicating "Lightroom has met permission issues. I followed the directions from this link met Lightroom user permissions problems. Bridge of Photoshop Lightroom crashes or hangs at the launch but it does not set itself (I did not take the final step which is - create a new user account). I was working off of Yosemite, so I hope that the error can be corrected if I updated my operating system. Today, I downloaded El Capitan and Lightroom CC will not always open - I get the same error. I went to manually update the read and write permissions for the folders listed, but some of them don't make changes. The preferences file gives me an error saying "the operation cannot be performed because you don't have the necessary authorization." I don't have the "Adobe" folder in this route Caches

  • /Users/ [user name] / Library/Caches/Adobe /.

  How can I solve this problem and get Lightroom CC to work?

  

  @laurawielos,

  Try this:

  the Macintosh HD > users > [your user folder... click on 'Go' on the options bar at the top on the desktop (Menu bar) > then click on the 'option' key > mouse down to the selection of 'Library' that should appear > click on it to open the folder /Users/ [your user name] /Library/ ' "]

  You should now find the appropriate folders to change permissions. Just give your user name of the read/write permissions. I don't think you want to give everyone the read/write permission as some authors have claimed.

• Permissions for the model folder

  Hello again :)
  
  I'll set up the permissions for the user of the ODI, but I can't do this for the model files. I give permission to the user to view some files and all permissions on another folder.
  I did it for the project and it works very well.
  
  Problem is that I can not drag and drop template designer to Security Manager folder. I tried with and without additional generic permissions on the folder template.
  
  The user have CONNECT and NG DESIGNER profiles.
  
  THNX in advance!
  
  Published by: user13278245 on July 2, 2010 01:11

  This is my absolute favorite. It seems that you are one of the few who have played with the security of the ODI and also have any questions: D.
  To resolve this issue, start the Security Manager. And then click the designer button in the Security Manager. Now, you will be able to drag-and - drop model files :)

  Whewww, that was hard. Wasn't it: D :D

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.

• Change the default permissions for the folders created by the Weblogic process

  Hi guys,.

  We have IPM application running on Weblogic 11 g. It has a java process (Oracle InputAgent calls) which creates files on the Linux server.

  We find that this agent is to create these folders with unique permissions (owner rwe group - r).

  It dose not the group to write or execute permissions.

  Even if the parent folder has read writing performance group, the weblogic process creates with only read access to the group.

  Also, if you create a folder under the same parent using Linux command he created with read, write, execute access to the group.

  We want to know if it is controlled by weblogic config? And is there a way that we can change this default permissions?

  Also, we noticed that - Djava.io.tmpdir location records has also created with the same permissions. So believe this is controlled by the setup of weblogic.

  Please advice.

  Thank you!

  Neal.

  There two things that affect it:

  1 umask - this is defined in the script of startWebLogic.sh and if you change it, the files created by weblogic will use the specific permissions in the mask except when sometimes case 2

  2. the java process when you create files or folders specifies the authorization. In this case, there is nothing you can do unless you have the source code to change.

• Trying to assign permissions for the Admin user on the folder root

  I am trying to add a domain user on the permissions of the folder for the folder root in vCenter with administrative permissions.  I can get it to assign permissions for folders under the root, but not at the top of the tree.  See code below.

  #Create a VIAccount object can be used with New-VIPermission, Get-VIPermission, PowerCLI etc.

  Function New-VIAccount ($principal) {}

  $flags = '

  http://System.Reflection.BindingFlags: NonPublic - bor

  http://System.Reflection.BindingFlags: Public - bor

  http://System.Reflection.BindingFlags: DeclaredOnly - bor

  http://System.Reflection.BindingFlags: Instance

  $method = $defaultviserver. GetType(). GetMethods ($flags) |

  where {$_.} Name - eq "VMware.VimAutomation.Types.VIObjectCore.get_Client"}

  $client = $method. Invoke ($global: DefaultVIServer, $null)

  Write-Output"

  (New-Object VMware.VimAutomation.Client20.PermissionManagement.VCUserAccountImpl ')

  (- ArgumentList $principal, "", $client)

  }

  $svcaccount = $domain + "\" + $username

  $account = new-VIAccount "$svcaccount".

  #(Get-dossier-dossier nom) | New-VIPermission-role Admin - main $account - spread: $TRUE # this adds the user to a folder called folder without any problem.

  (Get-file-name of the centres of data-Id file-group-d1) | New-VIPermission-role Admin - main $account - spread: $TRUE # when I try to apply to the root folder I get the following error:

  New-VIPermission: 2009-12-24 14:19:30 new-VIPermission 9C9AB6A7-E395-42D1-B944-516E1BBBCEF2 reference object not set to an instance of an object.

  To... vCenterSettings.ps1:93 tank: 70 + (Get-file-name of centres of data-Id file-group-d1). New-VIPermission < < < < - role Admin-main $account - spread: $TRUE

  I was able to reproduce the problem, which seems to be another bug for the cmdlet New-VIPermission in PowerCLI 4u1 indeed.

  As a workaround, you can call the SetEntityPermissions method directly like that

  $domain = 
  $username = 
  $svcaccount = $domain + "\" + $username
  
  $folder = Get-Folder -Name "Datacenters"
  $authMgr = Get-View AuthorizationManager
  $perm = New-Object VMware.Vim.Permission
  $perm.principal = $svcaccount
  $perm.propagate = $true
  $perm.roleid = ($authMgr.RoleList | where{$_.Name -eq "Admin"}).RoleId
  $authMgr.SetEntityPermissions(($folder | Get-View).MoRef, $perm)
  

• How to restore the permissions for the folder

  I work with Windows 7 and Internet Explorer 10.

  Initially I tried see my Cookies folder and eventually he finds in C:\Users\(my user name).  I wanted to look at the files and potentially manually remove some, but I was not allowed access to the folder.  I am the sole owner and the user of that PC.  I figured it would give me full permission for files and folders.

  I tried to change the permissions on the folder, and even if the properties show that I have all permissions except "Special permissions" I was unable to open the folder.

  A second possibility, I changed the permissions 'All' allow all these same permissions - I clicked on full control.  A warning window appears saying that there are permissions that were more in agreement and it is potentially unstable.  I then decided to cancel this change all the permissions back, but am currently not able to restore the original permissions.  I am really unable to change all permissions to this folder now.

  I would like to restore the permissions on this folder Cookies in their original condition / by default.  Can someone help me?

  ALSO: since my original post, I noticed that in the icon beside my C:\username\ subdirectory when you view it in Solution Explorer, there is a lock.  I don't know if it was there before.  Is this a normal representation / by default to the directory?

  Thank you.

  Hi Susan,.

  Please follow the steps suggested by Amrita in http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-to-reset-all-user-permissions-to-default/9da312d2-c99b-4283-a275-e74d93dcc366

  Note: The steps mentioned in the link above involve changes to the registry. So it would be nice if you could take a backup of the registry before you start the troubleshooting step.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  If the problem persists, try the steps suggested by Brent in http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/restore-default-permission-settings-in-vista/7eacb966-cbbd-41ac-b08d-7c7f881943be

  Note: The steps in the above links works for Windows 7 and Windows Vista.

  For more information about the symbol of lock on certain issues, please go through the response of Steven S't-want-any-locks/f82a3e5e-5164-4dc2-9ec5-3e97ce7606d9 http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-have-lock-symbol-don

  Hope this information helps. If you have any questions, please let us know.

• How can I change the permissions for the program, I get the error message windows cannot find the target and II do not have permission to open any programs

  I deleted a virus and now I can't access anything whatsoever, except by admin, and is very limited

  Hello

  Permissions and security issues with Vista/Win7?
  

  Check the following settings.

  All the users who are allowed to share need to have an account on all computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users.

  Using the functionality of all saved the need to configure authorization for each of the established users, it does mean not all those who feel that they would like to connect.

  Users who do not have an account on the computer are not part of the Everyone group.

  If the LAN security is useless and users are not established, then move on the guest account provides the semi-open configuration.

  http://Windows.Microsoft.com/en-us/Windows7/turn-the-guest-account-on-or-off

  ---------------------

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

• Reset the State of the permissions for the BBM integration tests

  For the purposes of testing, I want to cancel my BBM surveys application registration and clear all permissions for this.

  Now when I remove and redeploy the application, he recorded again but do so without up permissions dialog window to ask if I want to allow it to access BBM or not.

  What should I do to get that back? If I go to the window of permissions of Applications in the settings (which is extremely buggy, incidentally) and disable the authorization of BBM, it does nothing but block the application to use BBM.

  Try to change your application id then. (The in the bar descriptor). That * has * to work, by definition. If it isn't, then you're doing something wrong, I think. If you change the id app, it's actually a different application.

• Can I set permissions for the public catalogue of training?

  We want to have all users to enter the training catalog and self register. We have more than 7,000 employees with no distribution list for all peoples. How to set the permissions for all employees to refer to the training catalog and self register?

  Ah, support strikes again. The training catalogue is not and can not be publicly visible. This permission setting is available for objects in the content library.

  If you go to the training tab, then training catalog, you will see an option to set the permissions to the training catalog. Choose that and you will be able to add any individual or group in the list on the left to the list on the right to give them permissions to display. There will be no option "make publicly visible.

  If an individual is not listed in the list on the right (or a member of a group on the list on the right), then they will receive the unauthorized message.

  

• using dbms_metadata for the ddl to create directories

  Hello
  I'm working on creating a test database, which is a copy of production for 11g upgrade test. I want to get all my production database DDL to create all the directories in the new test database. I tried using dbms_metadata for it-
  Here is the code I tried to use. However, when I query the my_metadata table, nothing in there. Can someone help me with this please?
  
  DROP TABLE my_metadata;
  CREATE TABLE my_metadata (md CLOB);
  
  CREATE OR REPLACE PROCEDURE progp1_directories_extract
  AS
  hndl NUMBER; -dbms_metadata handle
  e NUMBER; -transform handle
  CLOB DDL; -Individual CLOB from the database
  BEGIN
  hndl: = DBMS_METADATA. OPEN ("DATABASE_EXPORT"); -Open the metadata
  DBMS_METADATA.set_Filter (hndl, 'INCLUDE_PATH_EXPR', ' = "DIRECTORY" "); -Filter the data according to the case
  th: = DBMS_METADATA.add_transform (hndl, 'DDL'); -Get the Handle of the transformation
  DBMS_METADATA.SET_TRANSFORM_PARAM (th, 'SQLTERMINATOR', TRUE); -Include the semicolon
  
  LOOP
  DDL: = DBMS_METADATA.fetch_clob (hndl); -Loop through the result set, inserting in our temporary table
  DDL OUTPUT IS NULL;
  
  INSERT INTO my_metadata
  (md)
  VALUES (DDL);
  COMMIT;
  END LOOP;
  DBMS_METADATA. CLOSE (hndl);
  EXCEPTION
  WHILE OTHERS
  THEN
  NULL;
  END;
  /
  display errors

  Hello

  You can get the DDL for the directory running sql in the source database.

  Select 'create directory' | OWNER: '. ' || DIRECTORY_NAME |' like ' | " ' || DIRECTORY_PATH | " ' || ';' in dba_directories;

  Concerning

• Permissions for the users of Thunderbird

  Dear staff of Thunderbird,

  I have a question to limit the permissions of the users in Thunderbird.
  I want to set permissions on the installation of Thunderbird extensions (add-on), users could not install no matter what extension (add-on).
  Is this possible, if so how to configure?

  Thank you in advance,
  Computer SCIENCE Department of CJSC
  Hayk Haroyan

  Think a little out of box... I guess people have their own computer / user account.

  Thunderbird would need to have been already installed, but I think you could change the privileges and prevents the user from any other software installation/download.

  Such as:

  • http://www.thewindowsclub.com/how-to-prevent-users-from-installing-programs-in-Windows-7
  • http://install-block.software.informer.com/

• How can I include all of the necessary files required for the DAQ Assistant create an executable file?

  I create an executable file to run on a computer that does not have LabVIEW.  The problem is that I am using the DAQ Assistant.  The hierarchy of the VI is big enough, and I do not know how to include all the required files to eliminate the error "the version of LabVIEw full development is necessary to correct the errors."  A picture of the hierarchy of the VI is attached.

  I think I'm missing something in the installation.  I'm downloading now the DAQmx.  I knowticed that all 7 of my missing Subvi are DAQmx * .vi