File txt else reading machine

Similar Questions

• Our clients have trouble downloading a text file (.txt) on our website version 33.0 (using a filestream);

  Our clients have trouble downloading a text file (.txt) on our site version 33.0 (using a filestream). It worked well in previous versions.

  The error message they get reads as follows:
  {name of file and download user path} not can be saved, because the source file could not be read.

  Thank you
  Mike

  It is an old relative to corrupted downloads (http://kb.mozillazine.org/Source_file_could_not_be_read) error message, but has become more widespread in Firefox 33.

  To make a long story short... before, if the server sent a response which was smaller than the specified size, the gap has been ignored and the download was considered to be very good. From Firefox 33, a file that is smaller than the specified size is considered as being damaged.

  This comment in the bug tracking system has more information: https://bugzilla.mozilla.org/show_bug.cgi?id=1083090#c8

• You cannot request to applescript "If file exists" "else".

  Hello everyone!

  I've been Googling for hours for this. Could not find anything.

  I thought it would have been quite simple: get applescript to do a check to see if a file exists, and do something. If it does not exist, do something else.

  My script is as follows (more or less):

  game file_yes (("~ /") & 'File.txt')

  say application 'Finder '.

  if there are file file_yes then

  the shell script "SHELL SCRIPT" with administrator privileges

  say application "Finder" for display alert "Shell Script complete!"

  Try

  the shell script "rm ~ / FILE.txt" with administrator privileges

  end try

  on the other

  say application "Finder" display message "No file!"

  end if

  end say

  You must use a Mac OS X-style path when it comes to the Finder:

  If there is the file "File.txt" of the House then

  (137423)

• Convert file .ctt file .txt

  How to convert my contact list of the .txt file .ctt file

  Hello

  In most cases will not convert simple txt file in XML format

  Otherwise, it depends on the layout of the contents of your text file.

  Read this page for more precision.

  http://www.stylusstudio.com/text_file_to_xml.html

  Jack MVP-networking. EZLAN.NET

• Copying a file to a virtual machine

  Hello

  
  I have a script which customizes the VMS in a .csv file (attached).

  The logic is as follows:

  Change memory,

  change vcpus,

  edit notes,

  change the name of the network (VLAN),

  network settings,

  Set the static IP address,

  Set the hard disk size,

  and finally:

  extend your hard drive.

  I use the invoke-script command to extend the drive after it has been expanded through VMware.  To do this, I use the following syntax:

  xcopy $installdir\extddisk.txt \\$target\c$temp\/f

  invoke VMscript VM - $VM.name - ScriptText "diskpart /S c:\temp\extdisk.txt" - Hostuser $HostUser - HostPassword $HostPass - GuestUser - GuestUser - GuestPassword $GuestPass

  The problem is that, since the disc is developing as a last step.  If the virtual machine is being to be deployed to a VIRTUAL LAN that is not accessible (for example a LAN VIRTUAL DMZ) so I won't be able to copy the extdisk.txt file that depends on the diskpart command.  Is there another way I can transfer this file to the virtual machine directly?

  The content of the file is extremely simple, it is said:

  Rescan

  Select volume 2

  extend

  Since the file is so simple can I I could even just create it on the server before you delete the command has run successfully?

  You can use the Copy-VMGuestFile cmdlet to copy the file.

  If Invoke-VMScript works, that should work as well, it uses the same concept and VMware tools.

• When you try to put the graphic in the library «the file may be read-only...» »

  Hi all

  I thought that I try the new tools of the CC library.

  But when I want to place a symbol in a library, I get this warning:

  "The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  The symbol is on a whole new document, created and recorded by me, and there is no one else around me.

  The funny thing is only economy/add the colors of this symbol in the library is no problem at all.

  Reserving the document does not resolve this issue.

  So what's going on/false?

  Ok

  Thanks the Apple community, I solved this problem.

  Yes, I can add assets to any CC library!

  It has everything to do with permissions.

  This response to my post on the Apple Forum has resolved:

  A link to this post

  Why Adobe can't happen at such a response?

• Files on a virtual machine

  Hey guys,.

  which is the best way to get local files on my virtual machine, which runs on a virtual network. If you cannot go to RDP on the virtual machine.

  I have no idea

  Gruss Daniel

  If you are using a virtual network and it does not fill to the physical network... which makes it rather difficult.

  1. you can make an ISO image and load that the Media Lab Manager Store.

  2. connect virtual and physical memory, then use CIFS/Samba or other desired method.

  There is not much else.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• Can I copy and paste a file of pdf Reader FF for a 2nd computer that has no FF drive?

  I have 2 computers, we have Fire Fox Reader is not. Is it possible to copy/paste using a USB key a pdf file that is saved on the computer that does not have Fire Fox Reader and be able to open and work with this PDF using Fire Fox Reader? The second computer has Adobe Reader installed.

  I already know that opens a pdf file of Adobe Reader left the 2nd computer to the first, it opens in Fire Fox Reader.

  Yes, if you save a PDF file you can open this file with any program that can handle such a PDF file.

  So if the other computer has the Adobe Reader software, then this program will be used.

• File restore from Time Machine Yosemite to El Capitan

  I need to restore a single file from a Time Machine backup of Yosemite to my new iMac El Capitan.  The file in question has been saved from a Mac Pro from 2008 to a Time Capsule.  I put Time Machine in the dock and right clicked on it, so I could navigate "Other Time Machine disks" and I am able to see the Mac Pro to backup, then select it.  However when loading the backup, it's for my new iMac and not for the Mac Pro.

  How can I solve this problem?

  Hi jt

  To be honest, the easiest is to go through the Finder. Navigate to the document you want and copy. Then simply paste it where you want.

  The finder will allow you to see all of the back-ups no matter the OS at the time.

  Hope this helps, Greg

• automatically load the different files.txt

  Hello

  I have an app that loads a file.txt previously created by a user... When the user lanuch of VI application ask the path of the file to load!

  This user can create various files that configure the various points for his test...

  What I want to do is launch the app and be able to load different files without having to ask the way once again automatically!

  For example, the user create 4 files (point1.txt, point2.txt, point3.txt & point4.txt) my application could support only a single file, but I want to make a loop which allow the user to define the test sequence: point1.txt for 1 minute then point3.txt 2 minutes... etc...

  Thanks for your help

  
  

• Are there any plug Inns by what mp4 file can be read by Windows media player?

  Original title: Media Player

  Y at - it all plug Inns by what mp4 file can be read by window media player.could someone help me in this problem?

  Hello

  Windows Media Player does not support playback of the .mp4 file format. You can reproduce .mp4 media files in Windows Media Player when you install the decoders compatible DirectShow MPEG-4 packs. For more information, see this Microsoft KB article.

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992/en-us

  Step 1:

  Try to install this pack of code and check if it helps.

  Package of Installation of codec

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=507

  Step 2:

  Also, try searching the Internet. Often, you can go to the codec manufacturer's Web site to download the latest version of a codec.

  THIRD WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Word 2007 your AutoCorrect, MSO1033.acl, file could not be saved. The file may be read-only, or you do not have permission to modify the file.

  To get this message when opening Word 2007.

  Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.

  ALSO when I try to close or save a Word 2007 I get this message:

  Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)

  I then click on Cancel to not save the changes and then get the following message appears:

  Changes have been made that affect the model overall, Normal. You want to save these changes?

  I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started

  I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not

  Thank you!!
  Frustrated in minutes

  Install the fixit from article KB2258121 (fixit #50461).

  Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.

• do not download itunes open said the itunes library file cannot be read because it was created by a newer version of itunes

  The iTuneslibrary.itl file cannot be read because it was created by a newer version of iTunes

  Hello

  This error prevents the launch of iTunes. The library file has been modified to work with the new version of iTunes, so it is no longer compatible with the previous version. The good news, however, is that Apple save the iTunes library file in a subdirectory that allows you to revert to the previous version.

  
  Method 1:
  You can try the steps to recover a previous version of the iTunes Library.itl file.
  a. open your folder My Documents\My Music\ (Itunes).
  b. we backup the current version first. Rename iTunes Library.itl as iTunes Library.itl.bak to something.
  c. go to the My Documents\My Music\Previous of iTunes libraries folder.
  d. you can see several files that start with the iTunes library and have a date included in the name. Copy the new file into the folder.
  f. return to the my documents\Ma music and paste the file in the previous step. (The folder in step 1)
  g. rename the new file copied to iTunes Library.itl.
  Your library should now be restored to the previous version of iTunes, and the problem is solved,
  
  Method 2:
  If the problem persists then you can also uninstall and reinstall iTunes and check if it helps:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

• BlackBerry file txt

  Hi all

  How to open or at least display a file that is not an Image, video, mempad, ringtone, voice note etc.

  I just want to open a file txt (programmatically), I created in the emulator of the blackberry 8330.

  Is there anyway to find this file?

  The full path is file:///SDCard/MyFolder/the_bloody_file.txt //excuse language

  but there is no way of me seeing/viewing it

  Why is this? How can I solve this?

  Thank you very much

  Dan

  In the Simulator--> open the Aplication of media. You can find the explore menu option. Click on it and go to ther SD card, you can find your file.