Filed to load the disk access driver

Similar Questions

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• "You must format the disk in drive g before you can use it"

  "You need to format the disk in drive g before you can use it... "Really crappy to get Msg. I have a Corsair 16 GB FAT drive. I got the disc from my Vista computer and go to a XP machine safely. Aaarrrggghhh!

  New tips on how to solve this problem?

  When you say fat, do you mean exfat?

  If you have the disk formatted exfat format, you may need to update xp so as to be able to read,

  article following the base of knowledge may help you.

  http://support.Microsoft.com/kb/955704

  good luck keep us,

• "You must format the disk in drive J: before you can use it"

  Says error message "You must format the disk in drive J: before that you can use" I have a removable USB storage drive that I always connected to my computer whenever I have download movies save disk space on my computer.  Now, he wants me to format this disk storage.  Also, where he used to qualify this drive as "Removable disk", it is not labeled as Local J: drive. I don't want to format this drive because it erases all my files and folders on removable USB storage drive.  Please help me.

  I had the same problem.
  And I have a solution for you... The problem is that when you plug in your HD first, Windows 7 install your hard drive and associate it with only this USB port (whether the USB port "4") If you want to use (HD) again, you need to plug it into the same USB port (USB port '4'), where it was first installed. It's stupid! But that's how it worked with my HD.

  Try all USB ports you have on your PC.

  Good luck.

  Hope this has been helpful. : D

  PS: the same problem is with all the damage that connect you to your pc.

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista won't go dormant and error related volmgr (could not load the crash dump driver)

  Hi all

  
  

  I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep.  I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then).  I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either.  I told him to go to sleep, and he wakes just in 1 to 5 seconds.  I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver.  Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep.  Any help would be appreciated, thanks!

  Here are the details of the error:

  
  

  -

  -

   

    45

    2

    0

    0 x 80000000000000

   

    152547

    System

    Sebastian-PC

   

   

  -

    \Device\HarddiskVolume3

    0000000001000000000000002D0004C004200000430000C000000000000000000000000000000000

   

   

  Hi Sebas-82,

  I suggest that you update the driver for graphics card on the computer and check if it works.

  How to upgrade the graphics card on the machine driver
  
  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on the graphics cards to develop.
  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
  5. click on Update driver software.
  6. follow the Wizard update driver to update the driver graphics cards.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.

  Also see the Microsoft kb article below.
  Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
  http://support.Microsoft.com/kb/958933

  If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• "You must format the disk in drive J (k) before you can use it?"

  Hello

  I have a great difficulty to access my external HARD drive. A (Title) error message when I try to connect my HARD drive to pc.

  I have 4 partitions in the disk of which 2 are accessible and 2 are not. Although I have seen some posts regarding this problem already posted, but still nothing has helped me. I tried after restarting the pc, change the name of the drive (from j to o), run the command chkdsk J:/f cmd of switching on the usb ports, but nothing has worked. Except noticed something strange about the file system that is mentioned in RAW instead of NTFS format before the two discs.

  I've attached a screenshot of disk management box, if this can help...

  Thank you!!

  Hey there SimranpreetSingh :)

  I'm sorry for the situation. What is the make and model of drive? Partitions or drives in RAW format are usually those with broken partition tables. For the best chance of getting your data I contact a data recovery company, but bear in mind that their services can be very expensive.

  Some third-party tools are available online, but I can't really recommend a because they are not sure 100%.

  Discs can go in raw if they are not ejected correctly with the safe-eject function. This function checks if all the requests and transfers to and from the reader are completed and that nothing will be lost when you remove the drive. The operating system writes a small amount of data on the disc when he checks everything and then renders the drive secured to eject it. The next time you plug the player into a system, it will try to locate this data element and if it does not find it will recognize the disk as a RAW disk or should be a disc format in order to work with it.

  Captain_WD.

• Windows could not load the kernel mode driver service

  How can I fix the service of kernel mode driver

  Hi danielh818,

  1. are you able to log on to the office after receiving the error message? (Without the error message)

  This error could be related to one of the pilots is not able to load. It could be related to the graphics card driver or any other driver.

  You can try to start in safe mode and check if the problem occurs or not.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Stuck the disk in drive

  Help me please anyone who is an expert in computers. I decided to put on a software for my PSP disk and that the disk is smaller than your average CD drive so it got stuck when I inserted it and now it won't come out! Help me!!!
  It's a DELL Inspiron 530 and the hard drive is very thin and the disc fits in the space that the disk drive occupies when it is not open. I tried to get him out, but he is stuck. Help!

  Hello NixiePixie,

  Thank you for your message.  Your computer is a laptop or a desktop computer?  In a desktop computer, there is usually a small hole on the front that you can use an object (such as a paper clip) to insert and open the door.  If you use a laptop, you can completely remove the player, it is difficult to know exactly how the disc is stuck, but if it's the drive itself and the computer, remove the drive should free up.  Please let us know the result.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Download message "You need to format the disk in drive Z" for an external hard drive that I serve.

  I have a HP Personal Media Drive that fits into a Bay on my HP computer and this is where I store all my files. This morning, I get the message that I need to format disk, which I'm not won't to do what I'd lose all the stored files. I tried a restore to a last week, changing the letter assigned to the drive, downloaded Recuva and Easeus, which does not recognize the drive as an option by attaching it to my XP laptop, where I get also to be format option, so I am at a loss of how to proceed. I read all the Articles of current forum to address the situation, but nothing has worked. The HP Media Drive has been formatted at the factory for an NTFS file system, so this isn't a problem. Any assistance you can give for me to recover the files that are stored on this drive would be appreciated. Thank you.

  http://welcome.HP.com/country/us/en/contact_us.html

  As it does not even when connected to a computer running XP, contact HP to above link for support.

  See you soon.

  Mick Murphy - Microsoft partner