Windows could not load the kernel mode driver service
How can I fix the service of kernel mode driver
Hi danielh818,
1. are you able to log on to the office after receiving the error message? (Without the error message)
This error could be related to one of the pilots is not able to load. It could be related to the graphics card driver or any other driver.
You can try to start in safe mode and check if the problem occurs or not.
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Original title: System reports the NIC does not properly
Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)
As none of the problems are met with connection network, do I ignore this warning or try to update the driver?
Hi eucalyptussurfer,
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
Please see the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows could not start the Base Filtering Engine service's local computer
I get this error
Windows could not start the Base Filtering Engine service's local computer
Error5: Access deniedWhen I try to start it but it won't start
My computer is
Windows 7 Home Premium
64 bit
Hello
1. don't you make software changes before the show?
2. do you have anti-virus outside Microsoft Product software?Follow method 3 in this article:
-
Windows could not load the profile of the user
When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.
Please reply me with the solution that I use win xp sp2Hi citycc,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. are you able to connect to Windows?
4. how many accounts do you have on the computer?
See the Microsoft article below and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
-
Windows could not load the NLS being missing or corrupt data.
I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:
Windows Boot Manager
Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: Windows failed to load the NLS being missing or corrupt data.Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.
I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).
Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.
Thanks in advance for your help.
Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:
I set up an instance of Vista virtual machine and copied since all the
*.nls in/Windows/System32 files and all *.fon files of the
Windows/Fonts. I then put on a USB key and inserted in
the breakage of the machine.I didn't know that this WindowsRE could read USB drives. It does things
easier. I then crushed the files on the area damaged with those of the
clean installation and a reboot took me directly in Vista.If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.
To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228. Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.
Let's see how these options work before considering anything else.
I hope this helps. Keep me in the loop.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Vista won't go dormant and error related volmgr (could not load the crash dump driver)
Hi all
I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep. I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then). I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either. I told him to go to sleep, and he wakes just in 1 to 5 seconds. I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver. Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep. Any help would be appreciated, thanks!
Here are the details of the error:
--45 2 0 0 x 80000000000000 152547 System Sebastian-PC -\Device\HarddiskVolume30000000001000000000000002D0004C004200000430000C000000000000000000000000000000000 Hi Sebas-82,
I suggest that you update the driver for graphics card on the computer and check if it works.
How to upgrade the graphics card on the machine driver
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on the graphics cards to develop.
4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
5. click on Update driver software.
6. follow the Wizard update driver to update the driver graphics cards.If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.
Also see the Microsoft kb article below.
Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
http://support.Microsoft.com/kb/958933If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows could not load the installer for the display
Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:
Do you have downloaded screensavers, etc...
1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".Select ' Yes, "I have already connected the hardware" > click "next".Find and click on your device and click "next".If a driver is necessary, it should have with your hard drive.You can select "Disk" and load the driver from there.If successful, go no further(2) when you install new video drivers
Uninstall the old ones
Restart in vga mode
disable a / v
Install new drivers
ResetIf successful, no further(3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.Retry installation -
Windows could not load a critical system driver is missing or damaged
I have windows vista OS, I ran the update and when I went to re-booting I got an error of the black screen that says: failed to load because a critical system driver is missing or damaged, and now I can't get my computer to start windows. I created a disc of recovery from the internet, but it cannot solve the problem.
today
When you say that a recovery disk can not solve the problem you should say disk was and what did you actually
have you tried this:
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
_________________________________________________________________________
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Windows could not load the installer of the image. Help please!
My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.
Thank you
John
Hello
Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.
Step 2: Install the latest version of DirectX on your computer.
Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/179113/ ) How to download and install DirectX(http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool
Step 3: You can also delete the upper and lower of your registry filters and check if it works.
WARNING:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
a. Click Start and then click all programs.
b. click Accessories and then click Run.
c. type regedit and then click OK.
d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
e. in the navigation pane, locate and then click the registry key under:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
f. in the right pane, click UpperFilters.
Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.
g. in the Edit menu, click on delete.
h. When you are prompted to confirm the deletion, click Yes.
i. in the right pane, click LowerFilters.
j. in the Edit menu, click on delete.
k. When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Mr., restart the computer.
-
Windows could not load the backup selected for the following reasons
I'm having a problem, try to restore a backup set
A failure of HD I had to wipe my computer.
Now I'm tyring to restore and it doesn't give me the error on the title of this thread with 0x810000E3 error code
I have windows vista Home premium
I can see the ZIP files on my external USB hard drive, but when I double click using windows compress or winzip files are not open.
I tried the restore (basic and advanced) the windows backup and restore program nothing works.
I have crucial information on this drive I need to recover.
Any information is greatly appreciated.
Thank you
I could not find any information on this specific error code - so it will have to address the situation in a generic way.
Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right. It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.
This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course. But it teaches you a lot about what is possible and how to do it.
Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.
I also found the following (but don't know if it of true or not):
1. after the start of "backup and Restore Center."
2. I chose "Advanced Restore"
3. I was did not an administrator password... maybe because my account is an administrator account.
4 choose "files from a backup made on a different computer.
5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »
6. under the drop-down list box, select your drive/partition and continue
7. If all the backups on your drive, it will show a list of them.
8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."
9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")
10. and you press "next".
11 guess what... no error!
12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.
13. I selected the folders I wanted to restore and bingo... it their restored smoothly.
14. so that the next time see a mistake, try to continue with him... ;)
I don't know if this will help, but it does not provide much information about the process (when it works). I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.
I hope this helps.
Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows could not load the installer for wpd
Hello
Load Windows XP Pro on an Acer Aspire 9410.
I received the above error code.
Unit boots to the desktop. After a few minutes, I get the blue screen of death. The error report is damaged.
All ideas
John
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
Could not load the design mode
Hello
I just installed Flash Builder 4.6 trial (Windows). When I create a new Flex Mobile project (target any platforms), this is what I get when I try to open the main view MXML:
I tried to increase the memory in FlashBuilder.ini but nothing changes. It is not a problem with my computer, it is very good and it works correctly with previous versions.
All advice?
Thank you.
Resolved to reinstall Flash Builder.
-
Finaly
I copied the plugin: layout of the user interface of another PC and pasted into my PC to: c: Program Files (x 86) \Adobe\Adobe InDesign CS4\Required
and ii work!
-
Hello, what can I do to fix this error?
Hello Mehran,
1 did you change on your computer?
I suggest you try the following article and check if it helps.
Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7
http://support.Microsoft.com/kb/2478117/en-usThank you
-
HP deskjet 6122 could not load the driver on the CD, he says is no longer supported
Original title: printer HP Printer driver
I have an old printer of HP deskjet 6122. It works very well.
However, when I plugged in a new desktop computer, I could not load the driver for the CD. He said that it is more compatible.
Later, I learned that the driver for HP 990 will work as a substitute.
When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver. It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.
Where can I go to download the HP 990 regardless of HP driver?
It's the HP 990c driver you want?
If so have you tried selecting the update of Windows while in the Add Printer Wizard?
It will take more than 5 minutes to get an updated list of printers and the 990c is.
You can get them here too:
Maybe you are looking for
-
How can I make firefox my nrisew I do not know where to go mto
went inti apps and disabled globe is correct THST and I want to fire fox as aid default broser
-
How can I determine that my writing pad out to a channel feature works?
Hello So I created a ramp function using a loop that takes the difference between initial and final pressure value, divide by an integer (called time on VI) and then increments the value by the result, until the final value is reached. The initials +
-
User name password of the modem
Original title: user name password Bought a modem and thought that it was all removed from the privous owner, but once I've implemented windows journal XP can get a username and password... it does not accept the than mine so I suppose he wants privo
-
Setting up FAX requires a CD I have any other options of how set up?
I received a computer from a friend, I don't have any job in the paper or CD for her. I went to try to set up my fax MACHINE from Control Panel/Add or remove programs/add or remove programs from windows. I clicked the box to add the FAX service and
-
Dear Sirs I want to buy a graphics card for my Dell optiplex 780 computer to activate the features of OpenGL 3D PhotoshopCC.I don't know if I have is SFF or ULTRA-COMPACT. Details of my PC are the following: SERIAL #: HFD3CP1EXPRESS SERVICE CODE: 379