Stuck the disk in drive

Similar Questions

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• "You must format the disk in drive g before you can use it"

  "You need to format the disk in drive g before you can use it... "Really crappy to get Msg. I have a Corsair 16 GB FAT drive. I got the disc from my Vista computer and go to a XP machine safely. Aaarrrggghhh!

  New tips on how to solve this problem?

  When you say fat, do you mean exfat?

  If you have the disk formatted exfat format, you may need to update xp so as to be able to read,

  article following the base of knowledge may help you.

  http://support.Microsoft.com/kb/955704

  good luck keep us,

• "You must format the disk in drive J: before you can use it"

  Says error message "You must format the disk in drive J: before that you can use" I have a removable USB storage drive that I always connected to my computer whenever I have download movies save disk space on my computer.  Now, he wants me to format this disk storage.  Also, where he used to qualify this drive as "Removable disk", it is not labeled as Local J: drive. I don't want to format this drive because it erases all my files and folders on removable USB storage drive.  Please help me.

  I had the same problem.
  And I have a solution for you... The problem is that when you plug in your HD first, Windows 7 install your hard drive and associate it with only this USB port (whether the USB port "4") If you want to use (HD) again, you need to plug it into the same USB port (USB port '4'), where it was first installed. It's stupid! But that's how it worked with my HD.

  Try all USB ports you have on your PC.

  Good luck.

  Hope this has been helpful. : D

  PS: the same problem is with all the damage that connect you to your pc.

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• Filed to load the disk access driver

  Partition Wizard displays "Classified to load the disk access driver" after his laptop with ThinApp.

  Could you please tell me how to fix this error.

  I bet that the application has a device driver, used for access to / manipulate the disc. ThinApp can virtualize device drivers. Generally, disk tools are poor candidates for ThinApp. You don't want a virtualization layer between your disk tool and the disk.

• Download message "You need to format the disk in drive Z" for an external hard drive that I serve.

  I have a HP Personal Media Drive that fits into a Bay on my HP computer and this is where I store all my files. This morning, I get the message that I need to format disk, which I'm not won't to do what I'd lose all the stored files. I tried a restore to a last week, changing the letter assigned to the drive, downloaded Recuva and Easeus, which does not recognize the drive as an option by attaching it to my XP laptop, where I get also to be format option, so I am at a loss of how to proceed. I read all the Articles of current forum to address the situation, but nothing has worked. The HP Media Drive has been formatted at the factory for an NTFS file system, so this isn't a problem. Any assistance you can give for me to recover the files that are stored on this drive would be appreciated. Thank you.

  http://welcome.HP.com/country/us/en/contact_us.html

  As it does not even when connected to a computer running XP, contact HP to above link for support.

  See you soon.

  Mick Murphy - Microsoft partner

• "You must format the disk in drive J (k) before you can use it?"

  Hello

  I have a great difficulty to access my external HARD drive. A (Title) error message when I try to connect my HARD drive to pc.

  I have 4 partitions in the disk of which 2 are accessible and 2 are not. Although I have seen some posts regarding this problem already posted, but still nothing has helped me. I tried after restarting the pc, change the name of the drive (from j to o), run the command chkdsk J:/f cmd of switching on the usb ports, but nothing has worked. Except noticed something strange about the file system that is mentioned in RAW instead of NTFS format before the two discs.

  I've attached a screenshot of disk management box, if this can help...

  Thank you!!

  Hey there SimranpreetSingh :)

  I'm sorry for the situation. What is the make and model of drive? Partitions or drives in RAW format are usually those with broken partition tables. For the best chance of getting your data I contact a data recovery company, but bear in mind that their services can be very expensive.

  Some third-party tools are available online, but I can't really recommend a because they are not sure 100%.

  Discs can go in raw if they are not ejected correctly with the safe-eject function. This function checks if all the requests and transfers to and from the reader are completed and that nothing will be lost when you remove the drive. The operating system writes a small amount of data on the disc when he checks everything and then renders the drive secured to eject it. The next time you plug the player into a system, it will try to locate this data element and if it does not find it will recognize the disk as a RAW disk or should be a disc format in order to work with it.

  Captain_WD.

• Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

  How do you get the BIOS to recognize external floppy port?

  HEEE? ?:|
  Are you sure you know how to update the BIOS?

  Come on cheshire! The update of the BIOS is risky If you n t know how to do!
  Usually, you don't need additional software to recognize the USB FDD drive or driver!

  I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
  It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

• Expand the size of the disk on drive C

  Hello

  (C drive) OS partition runs out of space on my vm.

  I stop the virtual machine, change the size of the hard drive, power ON the virtual machine, the extra space is not yet assigned.  Can how I extend the size of drive C with that extra space?

  Help, please!

  Thank you

  Jovic

  You can use a helper VM and then use diskpart to extend the drive.

  Here's a good way for:

  http://vmprofessional.com/index.php?content=2k3resize

• "The disk in drive F is not formatted. You want to format it now? »

  Hi, here is my problem:

  I've been working on documents word on my laptop today and save on my USB key, no problem. But when I went to my laptop after on the break for an hour, I inserted my USB and the above message appears. All of a sudden, I can't open or access one of my files on the memory stick - that's happened? It came not with the name of the memory stick, just 'removable disk (F) '. When I right click the icon and check the properties, it is said there are 0 bytes used and the Rob is all blue.

  I am really worried - if I lost all my files? If so how did it happen? Is there a way to recover my files? I format the drive? I am in a panic, because I'm a teacher and I prepared all my classes, I can't believe they simply disappeared, could someone help me please? I'm desperate, I don't know what to do.

  Thank you

  This kind of error occurs generally when the file system is bad or there is a virus. The safest thing would be to scan your disk for viruses.

  Good luck.

• Does not recognize the disk in drive D

  When I insert a disc in my D drive to burn or read, he invites me to insert a disk, although I did.  I do it again, same thing.  What can I do?

  Dale C.

  When I insert a disc in my D drive to burn or read, he invites me to insert a disk, although I did.  I do it again, same thing.  What can I do?

  First of all, try and fix the title of your topic.

  Second, make sure that your CD/DVD drive is (actually) do (from a material point of view) what it is you are trying to do.  They still make/sell the readers of CD & DVD Plains (readers only) and not all readers who burn can write about all the different types of media, you could buy (CD - R, CD - RW, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM, DVD, etc.) of these readers that appearance beyond the names/models, seem virtually identical.

  Finally, consider that the material can and is not bad.  Sometimes he comes to be replaced.

• lost the disk in drive C even after disk cleanup (Restore Points)

  I lost a few GB of space in my drive C. I checked the forums and found restore points using little disk space. I went to disk cleaning and deleated old restore points and then I changed the MaxSize parameter for 2BG restore point.

  After having done that, I got around 3 GB of free space.

  Even now I can see 4.2 GB of space lost in my drive C. Please find the details below.

  Capacity: 59.9 GB

  Used space: 56.3 GB

  Free space: 3.62 GB

  Properties of all the files and folders shows (including hidden files): 52.1 GB

  Hello

  To make sure that you have not lost space in my C drive

  Go to the management of the computer-> storage-> disk management

  and see if there is unallocated space. If so, then delete it

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.