Unsupported wireless device start-up dv5Pavilion 1004NR Lockup

I recently bought an ATHEROS AR9280 of incorporated works. It is a PCI Wireless LAN module which fits to the right following the removal instructions and reassemblky HP in the manual for my machine. Unfortunately, whenj, I try to start, there's a post error beep and the screen says unsupported wireless device detected interrupted Boot. Replace the Original device.

Huh? Upgrades not supported? It is a Vista PC, is it not? I can't believe that I can't use an internal PCI Express Mini MIMO card to get service level WiFi "n" on my machine. Does anyone have a solution?

Hello

It is not so easy as you think.

Computers laptops HP are in the white list of the Bios of the wireless card that works.

Each card must meet two conditions:

1. it must be the card of HP.

2. it must have the specific model number.

According to what I see this card you have now is on the black list of the Bios.

If you want to know what wireless card will work then post your part (p/n) number . You will find at the bottom of the laptop on a sticker that looks like now.

Tags: Notebooks

Similar Questions

  • Search for display wireless devices

    Some how I managed to get up the circular screen with a rotating wire that displays all available devices. Now his party and I cannot get to the top. I have a left click on the taskbar icon and a "search for wireless devices' but only get the small screen. someone help please?

    Hi Paul

    If I understand you right that you talked about ConfigFree Launcher. If I'm right, you can start it by clicking with left mouse taste ConfigFree icon on the taskbar. Choose search for wireless devices, and the pitcher will start. On the right side of the screen you can see four icons. On top it is called icon option. Check all the settings and you can also set an option that starts the Launcher to start Windows.

    Good luck!

  • Unable to share the wireless internet with other wireless devices

    Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
    Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

    Hello

     
    1. don't you make changes on the computer before the show?
    2. you receive an error message on the computer?
    3. what version of operating system you are using on the computer?
    4. What wireless device you try to share?

    Method 1:
    You can try the steps in the link and check.
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:
    I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

    1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

    2. click on the chevron to expand the current network profile.

    3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

    Method 3:
    If the problem persists then you can disable firewall on the computer and check.
    Enable or disable Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.

    For more information about how to resolve common network problems, please see the links below:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
    In Windows network connection issues
    http://support.Microsoft.com/kb/313242

  • Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

    former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

    My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

    Hello
     
    1. the options apply automatically on?
    2. have you made changes on the computer recently?
    3. have you installed any Alltel Wireless application to manage network connections?
    4. What is the current network location type on? Is it home, work or public?
    Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.

    Method 1.
    I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    Method 2.
    Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
    Or you can disable the antivirus software and check if that causes this behavior.
    Temporarily disable the security software installed on the computer and check if the problem persists.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Laptop does not recognize the wireless device

    Same problem here.  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, messeges troubleshooting all say computer doesn't detect any wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F730US laptop.  All the options out there?  Thank you

    Hello Bdufaud,

    Thanks for posting in the Microsoft Answers forum!

    You mentioned that your WiFi feature worked well until a recent update. Do you remember when the update occurred? An option that can help is to run aSystem Restore, making sure to select a previous restore point when the problem started to occur.

    Hope this helps J

    Adam
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Unable to connect to Internet wireless device is not found

    I disabled somehow my Dell XPS laptop computer and I can't log on the internet. I can not even find the 'Connect To' button in the start menu. My wireless device cannot be located using the hardware and sound which is under the control panel. I have Windows 7. I was trying to understand why my computer was not load the latest updates from Microsoft. I thought I found the solution on the forums and when I tried what has happened and now I can not even find how I got into this mess. I really hope someone can help me. Thank you

    I thought about it. Finally managed to find the link that me trouble: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-7-pro-64-bit-10-updates-fail-to-install/2493fd34-9d3d-47b8-a592-bd0183399b2c

    Four hours later and all is well except that I still haven't understood updates. Who will save for another day.

  • Satellite NB10-A-103 - necessary wireless device driver

    Hello

    Recently I have formatted my HARD drive and reinstalled Win8. In the process it seems I lost my wireless device driver and cannot find the reference of it to download the appropriate driver. Could you please tell me what device by which the manufacturer is installed on my laptop?

    Part no is PU141E-00K01FFR.

    Thank you.

    If you used the original image of recovery for Win8 installed all drivers must properly installed e. You can check in the Device Manager. Adapter wireless network installed and registered correctly?

    In any case, all the drivers, that you can download at Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  • Satellite L450 - lack of wireless device

    Hi guys

    I have a Satallite L450-181 and had to install a new hard drive with a new installation of windows 7 Professional.
    Everything works apart from the wireless device when I install the driver for the device disappears I find it use msinfo32 and it seems that there is no ID and where it has demonstrated its error code in Device Manager indicates 12 "destitute".

    The device is a realtek NIC 8191se.
    I tried different drivers but none worked I've searched forums to find similar errors, loads and none were actually the same problem I have the active wireless switch. When the driver is installed for some reason, it keeps disconnecting and I can't reconnect.
    Someone at - he had this problem and found a solution for her because she makes me crazy?

    Thanks in advance

    Hello

    Please try this:
    Go to BIOS (press F2 during boot) and set the BIOS by default (F9), and then save the changes (F10) and restart.
    Then download the driver Portal Toshiba WLan Wlan:
    http://APS2.toshiba-tro.de/WLAN/

    Install the Wlan driver and check if the wireless network card is recognized correctly in the Device Manager.
    Usually the Wlan could be marketed by using the FN + F8 keys.
    The FN keys would work if install you the VAP and Flash memory card Support utility. Note. The VAP should be installed first.
    I use the two tools distributed satellite L550D series two is working on my old A210 and I can enable and disable Wlan correctly.

  • Set up the wireless access point, but the wireless devices are unable to get ip address

    Hi, I wanted to put my D7000 as router AP. My main router is Sagemcom F@st 3864 by Optus ISP (Australia).

    First of all, I put the D7000 in Bridge mode I did these steps:

    1. replace the IP LAN 192.168.0.100

    2 disable DHCP

    3. connect the LAN port to the main router Lan port

    Internet connection wired and wireless on the same device but other wireless devices has failed

    To remedy this, I made another choice, allowing point-to-point wireless access in the advanced settings of the D7000. I followed the instructions from this link

    http://KB.NETGEAR.com/app/answers/detail/A_ID/24104/~/how-do-i-change-my-Nighthawk-router-to-AP-mode...

    I put dynamiccaly = wireless internet cable success but peripheral does not have an ip address

    No idea how to fix wireless? I'm not very experienced

    Thank you!

    I just fixed it just now. For AP mode, connect the LAN port of the main router to the WAN port on the D7000 (not LAN to LAN). I wish I thought to it much sooner.

  • NETGEAR wndr3400v2 let more new wireless devices?

    I use my router via my comcast cable router (bridged) and it works very well except for some time now, I can not add all the new features for access control? He shows them under authorized devices not connected and I can't have them on the first screen of permit/connected. I usually restrict so a new device mac address must be submitted, but anyway most I can't have a new wireless device? I have only about 7 things on it cuurently... any help would be really appreciated. I just got a new TV and can't connect. First thing I noticed when I tried to let someone take the router for their wifi phone... Sorry if it isn't so clear.

    Thanks a lot for your help Elaine... Get what you're saying. Not sure if I'm going to pull the trigger to reset quite yet. Why do today what you can put off until tomorrow... hahaha

  • HP 15-d017cl Notebook PC: not found wireless device. No seriously, as * gone * not found.

    Earlier today, I was using my computer to access the internet (was simply looking at Facebook, nothing special) and suddenly my computer crashed.  He had a quick error on a thread in the driver or the device or something like that.  When the computer is restarted, option wireless connections would not pop-up, just ethernet.  So after a lot of Troubleshooting Wizard and pressing this button small adapter wireless without success (the red light was on it all the time, which is routinely), I checked the settings, but while the 'airplane mode' section is very well and has the small cursor to activate, and devices 'Wireless' below says "we found on this PC wireless devices."  Well, of course there should be some.  I tried a bunch of things:

    -Went to the Device Manager and clicked on network adapters.  RealTek PCIe FE Family Controller is the only element here, I take it is the connection to the local network, as is anything that works.  Under Human Interface devices, he has HID compatible wireless radio controls and driver HP wireless button.  They are both updated and according to the properties, work correctly.

    -Use Windows Update to check for updates, install and reboot.  Nothing new.

    -Use system restore to go back a few days.  Nothing new.

    Next option I could think would be to restore the driver of HP wireless button (HID-compliant doesn't have the option), and if it does not, an another system restore or reset.  I hope not to have to do, because it's going to take a lot of work and a shopping spree, I have all the pictures of my two years since he was born as well as a whole bunch of programs, not what I think I have the program CD for more (my husband had some items stolen awhile back).  I'd love for more suggestions, I've been working on it for several hours and my brain hurts.

    Hello

    Try to update the Bios and the last pilot wireless from the HP website.

    Where you're comfortable, reinstall the wireless card once to the back side of the device. If these two options do not work, I would say to replace the wireless card as it is may be defective.

  • M40X-309: I can not find wireless device in Device Manager

    As soon as I bought my M40X-309, I've updated for Win XP Pro. Everything works well, but I can't use my wireless device.

    I can't find the Device Manager, it shows only one network device (other than 'real').

    When I tried to change his player windows keep watching, but has not found the right driver.

    I tried to install the driver intel driver atheros (I don't know which is the right one), but the unit still apears as "?" and does not work.

    Can someone help me? Thank you

    Hello

    This device was shipped with an Intel 2200bg WLan minPCI.
    In this case, you need a driver for Intel. Visit the Web from Toshiba or you download the driver from the Intel site.

  • Wired device (PC) connected as a wireless device

    Dear All - my lists of connected router my PC connected to the modem as a wireless device. How to configure my router D1500 to the list as a wired device. I plugged a cable ISP.

    Thanks for help.

    Tapas

    Thanks for your reply. I've tried it. There are 3 rear - 2 yellow (LAN1, LAN2/WAN) ports and an ADSL grey. The cable can only be mounted one or the other of the two yellow ports. It worked not on port LAN1 but working in the other port.

    However, I do not know how, now, the problem seems solved. The basic home screen display properly wired device (PC) and wireless (my laptop) it connected the modem router.

    With best wishes,

    Tapas

  • HP Pavilion dv7-6c73el: Windows 7 won't find Wireless Device after format/reinstall

    Hello

    I've just formatted my laptop and reinstalled Windows 7.

    While reinstalling all the drivers, I noticed that Windows doesn't recognize / find my wireless adapter device.

    The real problem is that I don't know on which is my laptop wifi adapter. So I tried the 3 drivers I found here:

    http://support.HP.com/us-en/product/HP-Pavilion-dv7-entertainment-notebook-PC-series/5169332/model/5...

    But none of them worked (in fact, the system even allow me to install).

    I also installed the HP connection manager, who said that my wireless device is 'disabled in Device Manager.

    I went to the window manager devices, but under "Network adapters" I see only the controller PCI Realtek.

    What should I do? I really need my WiFi adapter to work.

    My laptop is a HP Pavilion dv7

    Product number: A9X73EA #ABZ

    Serial number: [personal information]

    I appreciate your help,

    Thank you!

    You are the very welcome, Angelo.

    You need this card wireless driver for this ID...

    This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp57001-57500/sp57049.exe

  • Pavilion Sleekbook 14-b001tx: there is no wireless devices

    I just installed a fresh copy of windows on my HP Pavilion Sleekbook 14-b001tx 8. I installed all the drivers. But in device manager it is a yellow mark 'network controller '.

    My problem is that I am not find my wireless network. When I go to PC settings > wireless, it says "no wireless device is available.

    When I try to add a device, it looks and says "no device is available.

    If I connect my router cable directly to my laptop, ethernet works. But still wireless connections do not appear even wireless icon on the taskbar.

    What I have to do?

    Kindly help me

    #SHS

    Hello:

    When you see a labeled device network controller!... that is the wireless card that needs a driver.

    I looked at the list of parts for your laptop and this indicates that your model comes with an Atheros card free wireless/bluetooth.

    These are the drivers that you need for this model of the wireless card.

    This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

    File name: sp63802.exe

    This package contains the installation package driver for theQualcomm Atheros Bluetooth in laptop computers operating system models supported runningâ.

    File name: sp64259.exe

Maybe you are looking for

  • Palm Desktop by Access 6.2.2 shows that media and installation options

    I run Palm TX on desktop PC Windows XP with Palm Desktop 4.1.4 and laptop Windows Vista business - no problem with the Xp machine Palm Desktop by Access 6.2.2 worked but now only shows the multimedia options and install - everything else like calenda

  • Satellite 145 turns off when running with a maximum performance (3.4 Ghz)

    Hi people Satellite 145 P4 538 / XP HE / 512 MB / 60 GB / 17WXGA / DVD-SupermultiDL /. I have a question that stirs in me a right pain in the ass, everytime I run my laptop at full speed (3.4 Ghz) for more than 5 minutes and the laptop is on a flat s

  • Re: Qosmio F750 EasyControl Volume bar - lit or not?

    On the EasyControl Panel between the two volume control buttons (+ and -) is a strip of the volume level. It is light, incandescent or it is just an idle figure? What is this for?On the promo pictures I saw incandescent For example [here | http://ima

  • Satellite L300D - spare chips No.

    I have a laptop L300D I try to go there, the first problem was the PSU died, also replaced a fuse on the main Board smd, but he also destroyed a here on this Board can t read the chip so that his breath out only info I did the part no screen printing

  • U530 inaccessible boot device

    My laptop will move after the start-up of the screen always go to the frowny face screen. Help, please.