Files .dbx open after having reformatted computer

Similar Questions

• Skype not opening after having moved to the Applications folder

  Back a few months ago, I downloaded Skype on my computer. I was still pretty unfamiliar with the Mac at the time, so I was not very well what to do with the dmg that I got. Simply do not know better, I ended up launching Skype from the dmg. That's how I used Skype until very recently. A few months after this happened, I learned that you were supposed to copy the application in the Applications folder on the dmg. However I did not worth to fix this error until now (in order to remove this disk image of Skype sitting there). I deleted the Skype of the dmg icon on my dock and copied in the Applications folder. I then tried to run, but it crashed before it could do something. The main window of Skype did not appear.

  If it's worth anything, there is a very old version of Skype on this computer, the surplus of when a member of the family used a few years ago. However Skype on the dmg would be fine, so I doubt that this could be the culprit.

  I am running OS X Yosemite 10.10.3 on an iMac 27-inch Mid-2010.

  We always recommend to install the latest version of Skype... That said, try this: download the latest version by clicking on the link at the top of this forum page downloads. Then, open the Skype.dmg file you will find in your downloads folder. Drag and drop the Skype icon to the icon of the folder Applications in THIS WINDOW. This will install Skype. Subsequently, you will find Skype (the application) in the Applications folder on your hard drive, where you can start. Once it launches, click right (or click/hold) Skype in the Dock icon and select Options. Choose to keep Skype in the Dock, and it will fortunately still live there then.

  --
  Entia non sunt multiplicanda praeter necessitatem.

• Why not Photoshop create new files or open after a while 'old'?

  So I've had this problem for about a month now and is really infuriating.

  I installed the trial version CS6 Master suit, and after a little more, I would like to notice that after some time of using photoshop, would not:

  • Open old files
  • Create new
  • Would slow down and begin to break the feet if I had a file open when the 'event '.
  • It would be impossible to record.

  After a google search, I found a lot of suggestions, such as the default printer is a network printer that was not connected or that the suggestions were corrupt. None of them worked. I did a clean reinstall of windows, but this did not fix my problem. Now, I think I remember that there was a problem I had as many years ago, and it's a windows update that screwed up Photoshop, one of the K9XXXXXX these updates. Other than that, I have no leads other than the fact that it is a hardware based or somehow the problem persists after reinstallation of windows.

  I tried to support, but of course they require that you bought to get any help. So all I have is this forum. Help, please.

  Specifications of the PC:

  64-bit Windows

  I7 950

  HD6970

  Rampage III Gene mobo

  12 GB of ram

  All drivers up to date

  Guys, this has been resolved in another thread:

  Re: Could not create/open a new file - Photoshop CC

  Open photoshop when it is buggy and press Ctrl + Break (Break) (it's usually next to the print screen).

  If all goes well a fix will stop this bug directly to the outside, now that a solution has been found.

• After having my computer up to date, it does not find the printer. It indicates that the filter of the keyboard does not have a pilot.

  After I had my computer cleaned and updated, I can't print.  A message says that the filter of the keyboard lacks a driver.

  Hello

  (1) what is the number of brand and model of your printer?

  (2) what operating system is installed on your computer?

  (3) the printer is not detected in Device Manager?

  I suggest you to try the steps below and check if it helps.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Re - install xp - pro after having reformatted because of fake antivirus & no is more have the cd with the code box?

  I have windows xp - pro, I had to re - install on my son because of fake anti-virus computer virus;
  AVG free trapped of fake antivirus, but computer keep crashing & reboot.
  then removed the hard drive & scanned with my computer & keep coming with fake anti-virus, no matter how many times I have scanned hard drive. so to solve the problem I re-formatted the hard drive, then re-installed wndws xp - pro. but I can't find the original cd case back in effect;
  got lost after the last change of House which can remember;
  so, how do to get the product activation code;
  what I have to go out & buy new o.s that would be greater than computer son, or is there another method to find the installation cd code

  Look on the side of the case on a desktop computer or at the bottom of a laptop for the product key.

  J W Stuart: http://www.pagestart.com

• I have no sound after having my computer wiped and reset for my personal use.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: the sound was working before. But I got it reset because the other owner info was still on it. (Information store... etc). I am not computer savy, but I would like a little noise when they work or play.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Blaine,

  · What is the number and the model of the computer?

  1. update the audio device and check the results. Follow the steps for the same thing:

  a. Click Start,

  b. click on run, type devmgmt.msc in the Open box and press ENTER.

  c. find the audio device

  d. right-click on the device, and then select update

  2. follow the steps from the link below: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  You can also check: how to troubleshoot sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Music player does not open after having upgraded lenovo to lollipop a6000

  When I try to open my phone's default music player it does not open. But before you move to the music of lollipop drive worked perfectly. Can you help me please?
  (Sorry for my bad English)

  Find it in Setings > app > all apps and clean the Max and history, it will not erase your reboot a few songs from his memory.

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• After having FF recently upgraded, it always opens minimized, with an icon on the taskbar but will maximize not for me to use it - teacher W7 64 operating system

  I had a lot of problems with Vi-view infecting Firefox recently, but I have deleted successfully. Train removed and reinstalled Firefox. On the re-setup, Firefox works perfectly. However, if I close the program and try to open it, I have a problem. An icon appears in the taskbar and if I go over it, it shows a normal startup of Firefox tab. However, I can't optimize the screen to use the program. If I try to bring it to the top, a small picture will fly to the right of the screen. I have installed Chrome and IE11 and I checked to make sure that the Vi-view is no longer present on the machine to make sure that this virus was not the problem.
  My operating system is Windows 7 Professional 64 bit.
  Any help gratefully received. I don't want to stop using Firefox.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  Damage causes bad-ware. Sometimes to the point that the computer cannot
  not even start. Once clear you a virus check programs for problems.
  You may end up having to re - install some of them.

  Perform a file system check to repair the corrupted system files
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Download Firefox full installation for all systems and languages {web link}
  Save the file. Then;

  Using your file browser, open the folder of programs on your computer.

  Windows: C:\Program Files
  C:\Program Files (x 86)
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Find and rename the files Mozilla and Firefox adding .old to them.

  Now run the full installer.
  If all goes well, remove the OLD files when you are finished.

• Why even after having changed the permissions can't write to my files?

  I moved files on "users / shared" on the imac 27 "my father Yosemite retina.  He got last June but was not able to migrate because of her old imac was in Florida and North Carolina.  So, I migrated the old imac again with time machine backup charges a few months after getting the computer.  Now, I'm trying to merge the 'old' on the new computer account with the migrated account 'new', I restored it with time machine from the old imac.  I thought I was smart "passage" large libraries of film and photo of users / shared and that the account migrated from old imac. (on the same computer again) But I have no write permissions for files on the migrated account.  And making matters worse, while I can't write to files, I'm still able to corrupt them trying to change permissions and try to load them with i-movie and what not.  So now, I have a 6 GB corrupted movie library and not backup.  I tried it duplication and corrupt also.

  So my question would be "why is it when I add to the new migration full privileges to user for these files, I always failed to write about them?  Now instead, I wonder if there is a way I can fix the corrupted film library file.  Film - I tried and failed on the double.    I tried available i-movie file to 'all' as well as the addition of the new migrated user full privileges to it.  While I was able to do it without error (it seems to take the changes) or the new migrated user or former user on the new computer can write to the file (i-film library) at this stage.

  Every article help I read says just to click on info and change the privileges for what I did.  So I'm pulling my hair out.

  Hope that I was not too confusing in the way that I want to talk about the two different accounts.

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• After having stuck trying to upgrade Windows7 for Windows 10, the system gave back me to Windows 7.  Now, I think I lost my Adobe Reader software.  I can't open PDF documents.

  After having stuck trying to upgrade Windows7 for Windows 10, the system gave back me to Windows 7.  Now, I think I lost my Adobe Reader software.  I can't open PDF documents.

  Use the uninstaller to uninstall, if you can.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer

  Reinstall the reader Adobe Acrobat Reader DC install for all versions